List any four materials used for pattern making

1 Answer

Answer :

The various types of materials used are as follows:

1. Wood

2. Metal.

3. Plastic.

4. Plaster.

5. Wax.

Related questions

Description : List any four accessories used on lathe.

Last Answer : The various accessories used in lathe are as follows. 1) Lathe centers 2) Carriers or driving dog 3) catch plates 4) Chucks 5) Face plates 6) Angle plates 7) Mandrels 8) Rests

Description : List any four casting defects.

Last Answer : The various types of casting defects are as follows: 1. Gas Porosity: Blowholes, open holes, pinholes. 2. Shrinkage defects: shrinkage cavity. 3. Mold material defects: Cut and washes, ... Pouring metal defects: Cold shut, misrun, slag inclusion. Metallurgical defects: Hot tears, hot spot.

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

Description : Explain any four properties of Moulding sand. 

Last Answer : 1. Porosity: Molten metal always contain a certain amount of dissolved gases, which are evolved when the metal freezes the molten metal coming in contact with the moist sand , generates steam or ... to the casting. Refractoriness is measured by the sinter point of the sand rather than its melting

Description : State any Four lE Rules regarding electric safety. 

Last Answer :  lE Rules regarding electric safety: 1. IE Rule 3 : Authorization 2. IE Rule 29 : Construction and maintenance of electrical supply line and apparatus 3. IE Rule 30: Service line and apparatus on ... 26. IE Rule 60: Test for resistance of insulation 27. IE Rule 61: Connection with earth 

Description : List different starting methods of three phase synchronous motor. Explain any one of them.

Last Answer : Different Starting Methods of Three Phase Synchronous Motor: As synchronous motor is not self starting, different methods of starting are as follows: 1) By using an Induction (Pony) motor 2) ... . The rotor gets pulled into synchronism and starts running at constant speed as a synchronous motor. 

Description : State properties of conductor material used for overhead conductor. 

Last Answer : Following are the properties of conductor material:-   1. High conductivity :- Material should have high conductivity 2. High mechanical strength:- Material should have sufficiently high mechanical strength ... available & less costly. 9. Scrap Value: - Material should have high scrap value. 

Description : Sketch of Yagi-Uda antenna with its radiation pattern. Explain each element of YagiUda antenna

Last Answer : Radiation Pattern:- Explanation- A Yagi-Uda antenna, commonly known as a Yagi antenna, is a directional antenna consisting of multiple parallel elements in a line, usually halfwave dipoles ... one or two directors and reflectors give high gain and beam width per unit area of array.

Description : The Lissajous pattern on the screen of a CRO is an ellipse with major axis in quadrant 2 and quadrant 4. Then the phase difference between two signals Can be :  (A) 270° (B) 210° (C) 180° (D) 300°

Last Answer : The Lissajous pattern on the screen of a CRO is an ellipse with major axis in quadrant 2 and quadrant 4. Then the phase difference between two signals Can be : 210°

Description : List types of chips produced in machining process.

Last Answer : The various types of chips produced in machining process are as follows: 1. Continuous chips: According to its name, continuous chips have a continuous segment. . 2. Discontinuous chips or segmental chips: ... chip is same as the continuous chips except a built edge is form at the face of tool.

Description : Hard steel is suitable for making permanent magnets because?

Last Answer : Hard steel is suitable for making permanent magnets because it has good residual magnetism.

Description : Those materials are well suited for making permanent magnets which have _____ retentivity and _______ coercivity.

Last Answer : Those materials are well suited for making permanent magnets which have high retentivity and high coercivity.

Description : Those magnetic materials are best suited for making armature and transformer cores which have____permeability and_______hystersis loss.

Last Answer : Those magnetic materials are best suited for making armature and transformer cores which have high permeability and low hystersis loss.

Description : Can you help me with a list of clothing materials? (Details inside!)

Last Answer : answer:Cotton, wool, linen, silk, rayon, polyester, nylon, hemp, microfiber, leather, recycled plastic bottles. Velvet is cotton, nylon or silk with a short pile. Lace is cotton or silk thread that has been arranged in a pattern.

Description : State any four dielectric materials.

Last Answer : Ceramics, distilled water, paper, mica, polyethylene, and glass. Metal oxides

Description : State any four properties of conducting materials.

Last Answer : Electrical properties of conductivity materials: i) Low resistivity. ii) Low temperature coefficient of resistance. iii) High conductivity. iv) Low heat dissipation.  Mechanical properties of ... properties of conductivity materials: i) Adequate resistant to corrosion. ii) Low oxidation. 

Description : How to Find a Four Leaf Clover

Last Answer : How to Find a Four Leaf Clover A four leaf clover is associated with good luck, particularly because it is rare and hard to find. A clover with four leaves is actually considered a genetic defect, ... it! You can learn more about preserving plants and flowers in this article: How to Dry Flowers.

Description : State any four advantages of LC filter.

Last Answer : 1. The choke input (LC) filter has a high output D.C voltage. 2. It has no loading effect on the rectifier and power transformer.  3. The diode does not have to carry surge currents.  ... effect on the rectifier and power transformer.  7. It has better voltage regulation than that of π filter.

Description : A four -quadrant operation requires two full converters connected in  (1) Series (3) Back to back (2) Parallel (4) Series Cascade

Last Answer : A four-quadrant operation requires two full converters connected in Parallel 

Description : Describe the basic SHA operation with the help of its four mode specifications.

Last Answer : Sample-and-hold amplifier (SHA) is a unity gain amplifier with a mode control switch where the input of the amplifier is connected to a time-varying signal. A trigger pulse at the mode control switch ... but other forms, such as optical and mechanical forms, are possible. Also denoted S/H.

Description : what is the difference between four point starter and three point starter?

Last Answer : The shunt connection in four point starter is provided separately form the line where as in three point starter it is connected with line which is the drawback in three point starter.

Description : What materials are interior doors made of?

Last Answer : What materials are interior doors made of? The door leaf material is a key component that influences the quality and cost of the door. Interior doors made of walnut or oak look great and ... relevant for office doors, but they are also installed in residential premises if necessary to reduce costs.

Description : Magnetic and Non-magnetic Materials

Last Answer : We have now looked at a number of ways in which matter can be grouped, such as into metals, semi-metals and non-metals; electrical conductors and insulators, and thermal conductors and insulators. ... information must be stored, in computers and TV's, as well as in generators and electric motors.

Description : State the type of insulating materials under Class Y and Class B.

Last Answer : The type of insulating materials under Class Y : 1. Cotton  2. Silk 3. Paper 4. Rubber 5. PVC The type of insulating materials under Class B: 1. Backelite 2. Impregnated varnish 3. Mica 4. Fiber glass 5. Asbestos 

Description : State properties of insulating materials.

Last Answer : (i) Resistivity should be very high. (ii) It should be water resistant. (iii) It should not contain impurities. (iv) It should not be affected chemically and not corroded easily. (v) Its ... It should be mechanically strong (tensile strength should be more). (vii) It should not be porous.

Description : Classify electrical materials.

Last Answer : Classification of electrical materials: i) Conducting Materials ii) Insulating materials iii) Magnetic materials iv) Semiconducting materials

Description : Explain the mechanical properties of insulating materials.

Last Answer : i) Mechanical strength: Mechanical strength depends on temperature and humidity. a) Temperature: High temperature badly affects the mechanical strength of insulating material. While selecting material ... material should have property of easy moulding and machined into required shape and size.

Description : Classify magnetic materials and explain in brief.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { ... the absence of external magnetic field. Following are the ferromagnetic materials: Iron, Cobalt, Nickel.

Description : The electric breakdown strength of insulating materials depends on  (A) Nature of applied voltage (B) lmperfection of dielectric material (C) Pressure, temperature and humidity (D) All or these

Last Answer : The electric breakdown strength of insulating materials depends on  (A) Nature of applied voltage (B) lmperfection of dielectric material (C) Pressure, temperature and humidity (D) All or these

Description : _______ is used for heating non -conducting materials.  (1) Eddy current heating (2) Arc heating (3) Induction heating (4) Dielectric heating

Last Answer : Dielectric heating is used for heating non -conducting materials. 

Description : Magnetostrictive materials can convert ________ A) Magnetic energy into kinetic energy B) Kinetic energy into magnetic energy C) Both A and B D) None of these

Last Answer : Magnetostrictive materials can convert ________ A) Magnetic energy into kinetic energy B) Kinetic energy into magnetic energy C) Both A and B D) None of these

Description : The ability of materials to become polarized under an applied electric field is called _______ A) Ferroelectricity B) Paraelectricity C) Polectricity D) None of these

Last Answer : The ability of materials to become polarized under an applied electric field is called Paraelectricity

Description : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is (A) Carey Foster Bridge (B) Anderson’s bridge (C) Heaviside Bridge modified by Campbell. (D) Schering Bridge.

Last Answer : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is Schering Bridge.

Description : Insulating materials have the function of?

Last Answer : Insulating materials have the function of preventing an open circuit between the voltage source and the load.

Description : Is it possible to browse the topics?

Last Answer : Yes. Click on the topic in the question or search it in the search bar! Welcome to Fluther @cdmker

Description : How do I talk 2 the woman of my dreams?

Last Answer : Specifics?

Description : State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.  

Last Answer : Following advantages of MCB over Fuse: 1. No need of replacement of fuse wire. 2. Manually restore of supply is simple. 3. Fault understanding by visual inspection 4. More safe than fuse The standard specifications of ... 6A, 10A,16A,20A, 25A, 30A, 32A, 40A, 50A, 60A and 63A 6. 250V and 450 v

Description : State the various lighting calculations methods and Describe any one of them.

Last Answer : Lighting calculation methods: 1. Lumens or Light flux method 2. Point to point or Inverse Square law method 3. Watts per Square meter method i) Lumens or Light ... is taken according to the illumination desired on an average value considering overall efficiency of the lighting system.

Description : When will we see Ghislaine Maxwell's list?

Last Answer : We won’t!!! She said that SHE would no longer fight to keep the list private. She said NOTHING about the people on the list stopping it from becoming public knowledge. Somebody’s pockets are being lined even as we speak!!!

Description : I have generalized anxiety disorder and I want to make a list of simple things that a person in my situation should do in order to get out of their comfort zone. Any ideas?

Last Answer : Can you give us a little more information. How does your anxiety manifest itself and are there any specific triggers that bring on attacks? Also, when you say get out of your comfort zone, are you looking for ideas to help you build your resilience in order to lessen the likelihood of attacks?

Description : What's on your Murtaugh List?

Last Answer : answer:Crop tops not at my age and not after having a babe High heels bunions suck…so do flat feet but I already had those before I got too old

Description : Who was on your top ten most fanciable list when you were a teenager, assuming you had one of course?

Last Answer : Oh my word, who didn’t/don’t I fancy in the world of fame, fortune and showbiz. Mark Hoppus, bassist for Blink-182 is probably my number one. Oh and River Phoenix definitely, not forgetting Macaulay Culkin.

Description : List variable flow meter. 

Last Answer : 1. Variable area : Rotameter 2. Variable head : a) Venturi b) Orifice c) Pitot tube d) Nozzle

Description : List applications of stepper motor.

Last Answer : Applications of Stepper Motor: 1) Computer controlled systems 2) Numerical control of machine tools 3) Tape drives 4) Floppy disc drives 5) Computer printers 6) X-Y plotters 7) ... ) Extruders 21) Engravers 22) Analytical and Medical instruments 23) Embroidery Machines 24) Packaging Machines

Description : List different torques in synchronous motor. 

Last Answer : Different Torques in Synchronous Motor: 1) Starting torque 2) Running torque 3) Pull-in torque 4) Pull-out torque

Description : List types of timers.

Last Answer : Types of Timers: Retentive Timers: 1. ON Delay 2. OFF Delay Non Retentive Timers: 1. ON Delay 2. OFF Delay

Description : List out factors affecting proximity effect. 

Last Answer : Factors affecting proximity effect: 1. Conductor size (diameter of conductor) 2. Frequency of supply current. 3. Distance between conductors. 4. Permeability of conductor material 

Description : List the different types of tariff.

Last Answer : Various types of Tariff:-  1) Flat-demand Tariff  2) Simple-demand Tariff or Uniform Tariff  3) Flat-rate Tariff  4) Step-rate Tariff  5) Block-rate Tariff  6) Two-part Tariff  7) Maximum demand Tariff ... c) KW and KVAR Tariff 10) TOD (Time of Day) Tariff 11) TOU ( Time of Usage) Tariff

Description : List the energy conservation technique in induction motor. 

Last Answer : Following are the list of energy conservation techniques in electrical motors: 1) Reduction in iron losses by using low loss silicon steel core material laminated to thinner dimension. 2) Using bigger length ... at light load. 13) By rewinding in induction motor 14) By motor survey