Application one lamp controlled from two places

1 Answer

Answer :

Application one lamp controlled from two places:

1. For Stair case wiring

2. Hospital Wiring ( For operating the lamp in room and nursing station)

3. Bedroom Lighting. 

Related questions

Description : List different types of stepper motor. State one application of stepper motor.

Last Answer : Types of stepper motor : (i)Variable - reluctance motor (ii) Permanent- magnet motors (iii) Hybrid motors. Applications of stepper motor : In robotics, In CNC machines, In computers, printers, ... In Watches, In biomedical applications such as X-ray machines, CT scan, In Process control systems. 

Description : Illustrate with neat wiring diagram a single lamp control by two point method.

Last Answer : Single lamp control by two point method:  This system is commonly used for stair case wiring. It consists of two way switches (the switch operates always in one of the two possible positions) the ... the person will change the position of switch S2, so that the lamp will be switched OFF'.

Description : Places things to do at night?

Last Answer : When I was younger, I avoided a bad family life by practically living at a couple of discount theaters. Are there any theaters around there?

Description : Which profile to choose windows from?

Last Answer : Which profile to choose when choosing plastic windows? The window profile plays a key role in the most important consumer characteristics, including heat preservation, sound insulation, tightness and ... according to which profile systems used in construction must have a width of 70 mm.

Description : Can you please find me a reading lamp that is brighter than 3010 lumens?

Last Answer : I suggest you get a full-spectrum light, such as a Verilux Happy Light and/or full-spectrum light bulbs for your other lamps or light fixtures.

Description : What do they call this desk-lamp part? [See details].

Last Answer : Diffuser, I think.

Description : Are there any resources that you can recommend for me to learn LAMP (Linux Apache MySQL Perl/Python/PHP?

Last Answer : I’m not educated in this type of stuff, but I did a little research and got these. http://lamphowto.com http://onlamp.com

Description : How to Wire a Lamp

Last Answer : How to Wire a Lamp Wiring a lamp is something you need to do just in case your lamp breaks, and it so happens you keep on forgetting to get it repaired. It's a relatively easy process, with ... by yourself will also be a great help if you found the perfect lampshade from the flea market. Good luck.

Description : How to Make an Olive Oil Lamp ?

Last Answer : Olive oil is a very useful product in the kitchen, but you can also use it as a fuel source. In ancient times, certain grades and varieties of olive oil were used to light up rooms and houses. ... olive oil for lighting or fuel, you shouldn't use the same batch for cooking or flavoring your food.

Description : State the selection criterion of the lamp for various purposes.

Last Answer : Selection criterion of the lamp for various purposes:  While selecting a lamp for a particular purpose, the available lamps are compared on the basis of following criteria: * Light output ... such as ballasts * Compatibility with the electrical system * Suitability for the operating environment

Description : Explain the working of HPMV Lamp with neat diagram.

Last Answer : High-pressure Mercury-Vapour Lamp (HPMVL):  Working:  * Whenever 1-ph, 230V, AC Supply is provided to the discharge tube of MVL, initially the current flows from Phase to the choke to ... : The function of power factor improvement capacitor is to improve the power factor from 0.5 to 0.95.

Description : Define the terms incandescent and incandescent lamp.

Last Answer : Incandescent is the phenomenon in which the object emits or creates light when it is heated. An incandescent lamp is a lamp in which the filament is heated by electrical current & light is created.

Description :  Compare the salient features of LED and CFL based on: i] Lamp Efficiency ii] Life span 

Last Answer : Parameter LED CFL Lamp Efficiency  High (more than 70 lumen per watt) Comparatively less (50-60 lumen per watt) Life span (in working hours) 10000 3000

Description : Which of the following is a cold cathode lamp ?  (A) Mercury vapour lamp (C) Incandescent lamp (B) Sodium vapour lamp (D) Neon lamp

Last Answer : Which of the following is a cold cathode lamp ?  (A) Mercury vapour lamp (C) Incandescent lamp (B) Sodium vapour lamp (D) Neon lamp

Description : Switching of a lamp in house produces noise in the radio. This is because switching operation produces?

Last Answer : Switching of a lamp in house produces noise in the radio. This is because switching operation produces arcs across separating contacts.

Description : In a lamp load when more than one lamp are switched on the total resistance of the load?

Last Answer : In a lamp load when more than one lamp are switched on the total resistance of the load decreases.

Description : How are nuclear reactors controlled? Explain two different methods in brief.

Last Answer : Nuclear reactor is controlled using control rods: Control rods are made up of very high neutron absorbing material like boron, cadmium. By adjusting height of control rods on reactor core ... of nuclear reaction will increase. Whereas by pushing control rod towards the core it will reduce.

Description : A current controlled voltage source is equivalent to :  (A) series voltage feed -back amplifier (B) shunt current feed -back amplifier (C) shunt voltage feed -back amplifier (D) series current feed -back amplifier

Last Answer : A current controlled voltage source is equivalent to : shunt voltage feed -back amplifier

Last Answer : Thyristor can only be turned on by small gate pulse but it cannot be turn off by using gate hence thyristor is called semi controlled device.

Description :  application of logic analyzer.

Last Answer : Digital systems. Computer systems Logic circuits. Testing complex digital

Description : State principle of operation of piezo-electric transducer. State its application.

Last Answer : The piezoelectric element used for converting mechanical movement into electric signals. The mechanical deformation generates charges and this charge appears as a voltage across the electrodes.  ... destructive test (NDT) equipments 6. Piezoelectric materials are used in ultrasonic transducers. 

Description : State the application of phase sequence indicator; clip on ammeter, frequency meter & P.F. meter.

Last Answer : Phase Sequence Indicator:  1. For finding correct phase sequence of supply  2. For obtaining exact instant of parallel operation of alternators.  3. For obtaining reversal of rotation ...  4. In electroplating industries   5. In various processes industries for measuring power factor

Description : What is Amorphous metal? Give one application of this metal.

Last Answer : Amorphous Metals: Amorphous Metals means materials that do not possess a particular structure. Metal alloys typically possess crystalline atomic structure. The atoms are arranged in particular ... cores of special transformers d) Manufacturing magnetic sensors e) Magneto-motive sensors 

Description : State classification of Phase controlled rectifiers.

Last Answer : Classification of phase controlled rectifiers:

Description : Single-phase mid-point controlled rectifier with RL load

Last Answer : Single-phase mid-point controlled rectifier with RL load : The circuit configuration of single-phase midpoint controlled rectifier is shown in the figure. During positive half-cycle of ... some part of next positive half-cycle of voltage with reversed polarity can appear across load.

Description : Single-phase Midpoint controlled rectifier with Resistive load

Last Answer : Single-phase Midpoint controlled rectifier with Resistive load:  1) During positive half cycle of AC supply, a is positive with respect to b , this makes T1 forward biased and T2 is reverse ... voltage reverses the polarity and T2 is turned off. The operation is as shown in waveforms.

Description : Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.

Description : Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.

Last Answer : Single phase fully controlled half wave converter:  The circuit diagram of single-phase half-wave controlled rectifier with RL load and without freewheeling diode is shown in Fig. (a). The SCR T is ... , when again pulse is applied, the SCR is turned on & the above cycle is repeated. 

Description : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque  (1) Decreases (2) Increases (3) Remains constant (4) None of the above

Last Answer : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque Increases 

Description : A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is

Last Answer : Please show the solution for this question

Description : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is

Last Answer : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is √3/2

Description : A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc current. If the source inductance is 3 mH, the drop in dc output voltage is (A) 4.5 V (B) 6.75 V (C) 9 V (D) 13.5 V

Last Answer : A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc current. If the source inductance is 3 mH, the drop in dc output voltage is 9 V

Description : In voltage source converter based HVDC transmission system the active power is controlled by changing (A) phase angle of the converter ac input voltage (B) supply frequency of the converter ac input voltage (C) magnitude of the converter ac input voltage (D) DC voltage at the inverter terminals

Last Answer : In voltage source converter based HVDC transmission system the active power is controlled by changing phase angle of the converter ac input voltage

Description : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is

Last Answer : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is 25 x 25

Last Answer : The speed of a locomotive is controlled by gear box.

Last Answer : The gravity controlled instrument has crowded scale because current is proportional to sine of deflection angle.

Last Answer : MOSFET  are voltage controlled devices.

Last Answer : BJT is current controlled device.

Last Answer : No, IGBT is not the current controlled device. IGBT is a voltage controlled device. IGBT have combine qualities of MOSFET and BJT. The high switching speed of MOSFET and low conduction losses of BJT. Also, IGBT which stands for Insulated Gate Bipolar Transistor have high input impedance.

Last Answer : In  BJT  there  is  movement  of   electrons  and  holes   accros  the  junctions  which  is  basicaly  current  flow.

Last Answer : No, BJT is a current controlled device .

Last Answer : already answered here is mosfet current controlled device?

Description : Chopper controlled DC motor

Last Answer : Chopper controlled DC motor

Description : Where were you born, where were you raised, where do you live now, and where are you currently?

Last Answer : answer:I was born in central Illinois. We moved to the Los Angeles area when I was one and lived there for a year and a half. We then moved to Flagstaff for a year, then on to Novato, CA before ... . I am now currently residing in west central Illinois and I love it. phew! that's a lot of moving

Description : Any flutherites ever been to wilmington, north carolina?

Last Answer : There is a water park there. Only drove to the water park . Liked the area. Look for the local chamber of commerce and give them a call. They usually have a listing of events taking place during your ... in the local community or at least near by. Some will even send you pamplets if you request it.

Description : Which place would you like to live, if you're given a chance?

Last Answer : I already did the research and decided that Orange County California is the best place in the world. A lot of other people agree with me, that’s why it’s so crowded here. Summers in south Italy might be nice though.

Description : Who lives in Tucson?

Last Answer : fine I’ll just cook out by myself

Description : How to Raise One Eyebrow

Last Answer : How to Raise One Eyebrow Raising an eyebrow is a popular non-verbal expression that can convey a lot of things. In a nutshell, a raised eyebrow can denote disbelief, skepticism, amusement, and so ... without the help of widening your eye or pulling the rest of your facial muscles to the extreme.

Description : List different starting methods of three phase synchronous motor. Explain any one of them.

Last Answer : Different Starting Methods of Three Phase Synchronous Motor: As synchronous motor is not self starting, different methods of starting are as follows: 1) By using an Induction (Pony) motor 2) ... . The rotor gets pulled into synchronism and starts running at constant speed as a synchronous motor. 

Description : State the various lighting calculations methods and Describe any one of them.

Last Answer : Lighting calculation methods: 1. Lumens or Light flux method 2. Point to point or Inverse Square law method 3. Watts per Square meter method i) Lumens or Light ... is taken according to the illumination desired on an average value considering overall efficiency of the lighting system.