In FFT Spectrum Analyzer, FFT stands for _______.
(A) Frequency Fourier Transform
(B) Fast Fourier Transmission
(C) Frequency Fourier Transmission
(D) Fast Fourier Transform

1 Answer

Answer :

(D) Fast Fourier Transform

Related questions

Description : Fourier transform is a mathematical procedure to obtain the __________ of a given input signal. (A) spectrum (B) integration (C) difference (D) none of the above

Last Answer : (A) spectrum

Description : FFT analyzer can be used to find the ___________. (A) natural frequencies (B) mode shapes(C) both natural frequencies and mode shapes (D) none of the above

Last Answer : (C) both natural frequencies and mode shapes

Description : FTIR spectroscopy stands for? A. Fourier Track Infrared spectroscopy B. Fourier Transform Infrared spectroscopy C. Fast Track Infrared spectroscopy D. Fast Transform Infrared spectroscopy

Last Answer : B. Fourier Transform Infrared spectroscopy

Description : The spectrum of discrete-time Fourier transform will be:  a. Periodic and discrete b. Aperiodic and continuous c. Periodic and continuous d. Aperiodic and discrete

Last Answer : The spectrum of discrete-time Fourier transform will be: Periodic and continuous

Description : The best visual compression quality is achieved using A. DCT B. Wavelets C. Dolby D. Fourier transform

Last Answer : B. Wavelets

Description : What is the Fourier transform of a Gaussian time pulse? A) Uniform B) Gaussian C) Impulses D) Pulse

Last Answer : What is the Fourier transform of a Gaussian time pulse? A) Uniform B) Gaussian C) Impulses D) Pulse

Description : The Fourier transform of a gate pulse is:  a. Sinc function b. Triangular function c. Gate function d. Unit step unction

Last Answer : The Fourier transform of a gate pulse is: Sinc function

Description : Consider the following statements with respect to Discrete Fourier Transform (DFT) : 1. It is obtained by performing a sampling operation in the time domain. 2. It transforms a finite duration sequence into a discrete frequency spectrum. 3 ... (a) 1 and 2 only (b) 2 and 3 only (c) 1 only (d) 3 only

Last Answer : Consider the following statements with respect to Discrete Fourier Transform (DFT) : 1. It is obtained by performing a sampling operation in the time domain. 2. It transforms a finite duration sequence into a discrete frequency spectrum. ... (a) 1 and 2 only (b) 2 and 3 only (c) 1 only (d) 3 only

Description : The motion of particle is represented by, x = Asin(wt) in which A stands for A. Amplitude B. Wavelength C. Frequency D. Damping

Last Answer : A. Amplitude

Description : The number of cycles described in one second is known as _______. A period of vibration B cycle C frequency D all of the above

Last Answer : C frequency

Description : The motion completed during one time period is known as _______. A period of vibration B cycle C frequency D all of the above

Last Answer : B cycle

Description : The motion of a system executing harmonic motion with one natural frequency is known as _______ A. principal mode of vibration B. natural mode of vibration C. both a. and b. D. none of the above

Last Answer : C. both a. and b.

Description : The motion completed during one time period is known as _______. A. period of vibration B. cycle C. frequency D. all of the above

Last Answer : B. cycle

Description : . The motion completed during one time period is known as _______. A. period of vibration B. cycle C. frequency D. all of the above

Last Answer : B. cycle

Description : The motion of a system executing harmonic motion with one natural frequency is known as _______ A) principal mode of vibration B) natural mode of vibration C) both a. and b. D)none of the above

Last Answer : C) both a. and b.

Description : The number of cycles described in one second is known as _______. C ( A ) period of vibration ( B ) cycle ( C ) frequency ( D ) all of the above

Last Answer : C ) frequency

Description : The motion completed during one time period is known as _______. B ( A ) period of vibration ( B ) cycle ( C ) frequency ( D ) all of the above

Last Answer : ( B ) cycle

Description : _______ torsional vibrations will occur in a two-rotor system only if both rotors have the same frequency. (A) Free (B) Forced (C) Unbalanced (D) None of the above

Last Answer : (A) Free

Description : Which tester is used to measure SWR? A. Spectrum analyzer B. Multimeter C. Reflectometer D. Oscilloscope

Last Answer : C. Reflectometer

Description : The display screen of a spectrum analyzer presents a graphic plot of what two signal characteristics?

Last Answer : Power and frequency.

Description : A spectrum analyzer is designed to display what signal characteristic?

Last Answer : Amplitude versus frequency (the frequency domain of the signals).

Description : Indications of spectrum analyzer is presented by means of

Last Answer : a CRT

Description : Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter

Last Answer : c. Optical power meter

Description : Describe block diagram of spectrum analyzer and explain its working

Last Answer : Fig: Block Diagram of Spectrum analyzer. 1. Spectrum analyzer consists of voltage tune oscillator, mixer, IF amplifier, detector, video amplifier, sweep generator and CRT. 2. The input ... on the screen. 8. In this type the signal are broken down into their individual frequency component.

Description : State any four applications of spectrum analyzer.

Last Answer : Applications: 1. Spectrum analyzer is a very important item of test equipment for someone designing or repairing electronic equipment that uses radio frequency signals. 2. Its key factor is that it is ... of the dominant frequency within a signal 8. Used to measure the properties of RF devices

Description : Spectrum analyzer

Last Answer : Spectrum analyzer Spectrum analyzer is use for measuring signal in frequency domain. It measure modulation, distortion and noise. Spectrum analyzer measure the electrical input signal, for measuring ... of the signal. Other control include dynamic range, sweep speed and resolution bandwidth.

Description : SHM stands for A. Single Harmonic Motion B. Simple Harmonic Motion C. Simple Harmonic Mechanism D. None of the above

Last Answer : B. Simple Harmonic Motion

Description : Negative damping leads to a. instability b. fast convergence c. oscillationsNegative damping leads to a. instability b. fast convergence c. oscillations

Last Answer : a. instability

Description : Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ A Static force B Dynamic force C Torsion D Compression

Last Answer : A Static force

Description : Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ a) Static force b) Dynamic force c) Torsion d) Compression

Last Answer : a) Static force

Description : What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Last Answer : B. Direct sequence

Description : Give the advantages and applications of FFT algorithm.

Last Answer : Advantages: i) Computation of DFT with reduced no. of calculations. ii)As the computations are performed in phase, the number of memory locations required is 2N.

Description : Which of the following is not a lossy compression technique ? (A) JPEG (B) MPEG (C) FFT (D) Arithmetic coding

Last Answer : (D) Arithmetic coding

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

Description : Frequency is equal to ______. * 1 point (A) time period (B) 1/time period (C) *time period (D) /time period

Last Answer : (B) 1/time period

Description : A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Last Answer : (A) 32

Description : What is meant by critical damping coefficient? * 1 point (A) Frequency of damped free vibrations is less than zero (B). The motion is a periodic in nature (C). Both a. and b. (D). None of the above

Last Answer : (C). Both a. and b.

Description : The natural frequency of a spring-mass system on earth is ωn. The natural frequency of this system on the moon (g of moon = g of earth /6) is * 1 point (A) ωn (B) 0.408ωn (C) 0.204ωn (D) 0.167ωn

Last Answer : (A) ωn

Description : . In centrifugal pendulum absorber , the natural frequency in cycle per second can be given by A Fn =N √(R/L) B Fn =1/N √(R/L) C Fn =N/2 √(R/L) D Fn =N2 √(R/L)

Last Answer : A Fn =N √(R/L)

Description : From the following, which one is also known as low-frequency Transducer? (A) Stroboscope (B) Accelerometer (C) Vibrometer (D) None of the above

Last Answer : (C) Vibrometer

Description : For an under damped harmonic oscillator, resonance A Occurs when excitation frequency is greater than undamped natural frequency B Occurs when excitation frequency is less than undamped natural frequency C Occurs when excitation frequency is equal to undamped natural frequency D Never occurs

Last Answer : C Occurs when excitation frequency is equal to undamped natural frequency

Description : Critical speed is expressed as A rotation of shaft in degrees B rotation of shaft in radians C rotation of shaft in minutes D natural frequency of the shaft

Last Answer : D natural frequency of the shaft

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that A Its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration D Measurement of vibratory motion is without any reference point

Last Answer : C Its natural frequency is equal to the frequency of vibration

Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in A Transverse vibrations B Torsional vibrations C Longitudinal vibrations D None of the mentioned

Last Answer : A Transverse vibrations

Description : A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and0.45 Hz in a viscous fluid medium. Find the damping factor. 0.5122 (B) 0.9272 (C) 0.4359 (D) 0.2568

Last Answer : (C) 0.4359

Description : The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm. Assume the acceleration due to gravity g = 10 m/s^2. The natural frequency of this spring-mass system (in rad/s) is A 100 B 150 C 200 D 250

Last Answer : A 100

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 25.62 rad/sec B 20.78 rad/sec C 14.4 rad/sec D 15.33 rad/sec

Last Answer : A 25.62 rad/sec

Description : What is meant by critical damping coefficient? A Frequency of damped free vibrations is less than zero B The motion is aperiodic in nature C Both a. and b. D None of the above

Last Answer : B The motion is aperiodic in nature

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A 12.32 Hz B 4.10 Hz C 6.16 HzD None of the above

Last Answer : C 6.16 Hz

Description : Frequency is equal to ______. A time period B 1/time period C *time period D /time period

Last Answer : B 1/time period