Please Log in or Register for more.

Compare BJT, MOSFET and IGBT .

449 views

1 Answer

Answer :

 
✔️✔️Best answer
BJT MOSFET IGBT
BJT is a current controlled device. MOSFET is a voltage controlled device. IGBT is a voltage controlled device.
The input impedance of BJT is low. The input impedance of MOSFET is high. The input impedance of IGBT is high.
The drive circuit of BJT is complex. The drive circuit of MOSFET is simple. The drive circuit of IGBT is simple.
Switching speed of BJT is in the range of microseconds means slow switching speed. Switching speed of MOSFET is in the range of nanoseconds means fast switching speed. Switching speed of IGBT is more than BJT but less than MOSFET.
BJT is the negative temperature coefficient device. MOSFET is the positive temperature coefficient device. IGBT shows negative temperature coefficient up to 70% after that it shows positive temperature coefficient.
Conduction losses are low. Conduction losses are high. Conduction losses are low.
Switching losses are high for high frequency. Switching losses are low for high frequency. Switching losses are low for high frequency.
BJT is a bipolar device. MOSFET is a unipolar device. IGBT if bipolar device.
BJT is minority carrier device. MOSFET is majority carrier device. IGBT is minority carrier device.


Like 1 like

Please log in or register to answer this question.

Related Questions


Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ? (A) forward conduction (B) latching (C) forward blocking (D) reverse breakdown
Last Answer : Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ? (A) forward conduction (B) latching (C) forward blocking (D) reverse breakdown

Show More

3.2k views 1 answer








Last Answer : Because it has a higher switching frequency and heat tolerance.

Show More

143 views 1 answer








Last Answer : ON state losses of IGBT is less as compared to MOSFET and BJT.

Show More

142 views 1 answer








Last Answer : Yes IGBT is costlier than BJT and MOSFET.

Show More

2.6k views 1 answer







Explain the formation of parasitic BJT and parasitic diode in Power MOSFET. Can parasitic diode be used in same power electronics applications?
Last Answer : Parasitic Diode: The parasitic diode is in between drain and source. The MOSFET structure itself contains parasitic diode or body drain diode. This parasitic diode allows the reverse flow of current when the ... of MOSFET as a BJT collector. Parasitic BJT operates in the cut-off region.

Show More

2.6k views 1 answer







Operating frequency of power MOSFET is higher than that of power BJT. Justify the statement.
Last Answer : Power MOSFET have high turning on and turning off capability high switching speed of MOSFET is due to the high rate of change of drain voltage. The switching losses of power MOSFET ... lower frequency. Hence, operating frequency of power MOSFET is higher than that of power BJT.

Show More

984 views 1 answer







Is the input impedance of MOSFET more than BJT and FET?
Last Answer : Yes, the input impedance of MOSFET more than BJT and FET.

Show More

548 views 1 answer







Compare BJT with FET
Last Answer : FET BJT It is unipolar device i.e. current in the device is carried either by electrons or holes It is bipolar device i.e. current in the device is carried either by ... from minority- carrier storage effects & therefore has lower switching speeds & cut-off frequencies. 

Show More

70 views 1 answer







Compare JFET with MOSFET.
Last Answer : Particulars JFET MOSFET 1) Type Voltage controlled device Voltage controlled device 2) Mode of operation Operates only in depletion mode Operates in depletion and enhancement ... 6) Gate connection Not isolated from substrate Isolated by SiO2 layer from substrate

Show More

108 views 1 answer







Describe with neat sketch the constructional details of IGBT.
Last Answer : Construction: Insulated gate bipolar transistor or IGBT, is a solid state devices primarily used as an electronic switch which, as it was developed, came to combine high efficiency and fast ... layer and p+ emitter constitute a BJT with a wide base region and hence small current gain.

Show More

248 views 1 answer







Draw construction of IGBT.
Last Answer : construction of IGBT

Show More

363 views 1 answer







Justify the statements. 1. IGBT uses a vertically oriented structure. 2. IGBT is preferred as a power switch over both power BJT and MOSFET. 3. Punch through IGBT structure are more popular and are widely used.
Last Answer : 1. IGBT uses vertically oriented structure. IGBT use vertically oriented structure to reduce the resistance and to increase the current flow area. Hence IGBT uses vertically oriented ... DC circuit applications. Hence punch through IGBT structure are more popular and are widely used.

Show More

3.0k views 1 answer







Also, highlight the problem faced during parallel operation.
Last Answer : Parallel operation of IGBT: Parallel operation of IGBT is done for obtaining high current rating. Paralleling of IGBT reduces conduction losses and thermal stress. IGBT combines the qualities of ... . IGBTs must share losses equally otherwise IGBT may get failure due to thermal differences.

Show More

223 views 1 answer








Last Answer : No, IGBT is not the current controlled device. IGBT is a voltage controlled device. IGBT have combine qualities of MOSFET and BJT. The high switching speed of MOSFET and low conduction losses of BJT. Also, IGBT which stands for Insulated Gate Bipolar Transistor have high input impedance.

Show More

216 views 1 answer








Last Answer : IGBT is a bipolar device.

Show More

322 views 1 answer








Last Answer :  IGBT or Insulated Gate Bi-polar Transistors are typically semiconductor devices aka.  controlled switches,  which find their applications in Power Electronics circuits such as Inverters, and electrical ... ( buy implementing suitable Pulse Width Modulation scheme ) * Lower cost 

Show More

95 views 1 answer








Last Answer : IGBT is a bipolar device because current is carried by both holes and electrons.

Show More

137 views 1 answer







What is the difference between beta and forced beta for BJT?

Show More

554 views 0 answers







Explain open emitter BJT drive circuit.
Last Answer : open emitter BJT drive circuit:

Show More

262 views 1 answer







Explain the on state losses in power BJT.
Last Answer : On state losses in power BJT: Transistor have four types of losses one is turn on state losses second is turn off state losses third is turn on switching losses and fourth is turn ... ON = VCE sat x IC With increasing collector current collector to emitter saturation voltage increases.

Show More

295 views 1 answer







Describe with neat sketch the construction and working principle of MOSFET.
Last Answer : Construction and working principle of MOSFET:  A) Depletion type MOSFET: Construction: The N-channel depletion type MOSFET is formed on P-type silicon substrate with two heavily ... accumulation of electrons and hence more current. Thus the MOSFET is a gate voltage controlled device.

Show More

3.6k views 1 answer







State the applications of MOSFET
Last Answer : Applications of MOSFET: i) Switching-mode-power-supplies (SMPS) and linear power supplies. ii) Brushless DC motor drives iii) Solid state DC relay iv) Automobile applications v) Stepper motor controller vi) Lighting controls vii) Solenoid drivers viii) Robotics ix) Induction heating

Show More

87 views 1 answer







The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of (A) 1.5V (B) 2.5V (C) 3.5V (D) 4.5V
Last Answer : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of 2.5V

Show More

316 views 1 answer







Explain switching model of MOSFET.

Show More

75 views 0 answers







Explain MOSFET gate drive circuit and totem pole configuration.
Last Answer : MOSFET gate drive circuit: The turning on and turning off of MOSFET can be controlled from gate to source voltage signal. If the gate to source voltage of MOSFET exceeds threshold ... this configuration, the two switches (transistors) are used in totem pole arrangement with a comparator.

Show More

349 views 1 answer







Justify the statement. Antiparallel diode is connected across MOSFET.
Last Answer : In MOSFET current is flow from drain to source but when the load is inductive the current may flow in opposite direction. To avoid the opposite flow of current and to protect MOSFET the antiparallel diode is connected across MOSFET.

Show More

161 views 1 answer







parallel operation of MOSFET can be done more easily as compared to thyristor. why?
Last Answer : Parallel operation of MOSFET can be done more easily as compared to thyristor because the resistance of MOSFET is increases with increase in temperature. MOSFET have the positive temperature coefficient. In ... the parallel operation of MOSFET can be done more easily as compared to the thyristor.

Show More

300 views 1 answer







Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses. 
Last Answer : MOSFET is metal oxide field effect transistor. MOSFET is a voltage controlled device. MOSFET is majority carrier device. MOSFET are of two one is n-channel MOSFET and p-channel MOSFET. Gate, ... . Hence, power MOSFET is operated at high enough gate-source voltage to minimize the conduction losses.

Show More

842 views 1 answer







Explain difference between enhancement MOSFET and depletion type MOSFET.
Last Answer : In enhancement MOSFET channel is not initially exists but in depletion MOSFET channel is already exists. In case of depletion MOSFET if the voltage is applied between drain and source the drain current will flow ... a channel. depletion MOSFET & enhancement MOSFET

Show More

549 views 1 answer







Explain the series and parallel operation of MOSFET. Which is suitable and why?
Last Answer : Series operation of MOSFET: To increase voltage handling capability MOSFETs are connected in series. When the MOSFETs are connected in series each MOSFET should turn on and turn off ... on and turn off time and transconductance. Each MOSFET should share current equally.  

Show More

535 views 1 answer







What is depletion type MOSFET?..........
Last Answer : Depletion MOSFET: Depletion MOSFET is a MOSFET in which the channel already exists. If we apply a voltage between drain and source then the drain current will flow even if the gate to source ... in figure. The drain current will be reduced as the gate to source voltage made more negative.

Show More

189 views 1 answer







What is enhancement MOSFET?...............
Last Answer : Enhancement MOSFET: There are two types of MOSFET one is enhancement MOSFET and second is depletion MOSFET. In enhancement MOSFET channel is created by applying threshold voltage between gate and source ... mode. The enhancement MOSFET will not conduct if the gate to source voltage is zero.

Show More

175 views 1 answer








Last Answer : No, MOSFET is not the curent controlled device. The current between drain and source which is drain current is controlled by applying a voltage between gate and source hence MOSFET is a voltage controlled device. 

Show More

201 views 1 answer








Last Answer : already answered here is mosfet current controlled device?

Show More

172 views 1 answer








Last Answer : MOSFET provides better efficiency at high frequency and its high speed switching losses are less hence MOSFET is used for high frequency.

Show More

114 views 1 answer







Give the applications of IGBT
Last Answer : 1) AC and DC motor drives 2) SMPS 3) Inverters 4) Choppers 5) Solid-state Relays 6) solid-state Contactors

Show More

71 views 1 answer







The number of terminals present in IGBT is A) 2 B) 3 C) 4 D) 5
Last Answer : The number of terminals present in IGBT is 3

Show More

83 views 1 answer







Compare between BJT and FET on the basis of (i) Biolar/Unipolar (ii) Tharmal Runaway (iii) Noise (iv) Applications
Last Answer : Parameter BJT FET Bipolar/Unipolar It is bipolar device i.e. current in this device is carried by electrons and holes. It is unipolar device i.e. current ... in oscilloscopes, electronic voltmeters and other measuring and testing equipment because of their high input impedance.

Show More

758 views 1 answer







State 2 advantages of JFET over BJT.
Last Answer : Advantages of JFET over BJT: 1) High input impedance 2) Better thermal stability 3) Produce less noise 4) Smaller than BJT 5) Rugged in construction and simpler to fabricate 6) High degree of isolation between Input and Output. 

Show More

247 views 1 answer







List specification of BJT.
Last Answer : * The bipolar junction transistor (BJT) has small signal current gain, α (hfb). * Maximum collector current Ic (max). * Maximum collector to emitter voltage, VCE (max). * Collector to emitter ... . * Collector to emitter cut off voltage, VCEO. * Base emitter saturation voltage, VBE (sat).

Show More

113 views 1 answer







State reason BJT is called as bipolar junction transistor.
Last Answer : BJT is called bipolar junction transistor because in BJT current conduction takes place due to majority as well as minority charge carriers.

Show More

5.1k views 1 answer







List configurations of BJT. 
Last Answer : Configurations of BJT : 1) Common Base (CB) configuration 2) Common Emitter (CE) configuration 3) Common Collector (CC) configuration

Show More

67 views 1 answer







State the need of biasing of BJT.
Last Answer : Need of biasing: The basic need of transistor biasing is to keep the base-emitter (B-E) junction properly forward biased and the collector-emitter (C-E) junction properly reverse biased ... transistor biasing is necessary for normal and proper operation of transistor to be used for amplification. 

Show More

263 views 2 answers







Draw circuit diagram of voltage divider biasing list two advantages of voltage divider biasing of BJT.
Last Answer : Two advantages of voltage divider biasing of BJT. 1. It is very simple method of transistor biasing. 2. The biasing conditions can be very easily set. 3. there is no loading of ... 5. The resistor RE introduces a negative feedback. So all the advantages of negative feedback are obtained. 

Show More

780 views 1 answer







 If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be A) 0.98 B) 0.41 C) 59 D) 55  
Last Answer :  If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be 0.98 

Show More

192 views 1 answer







An FET is a better chopper than a BJT because it has (A) lower offset voltage (B) higher series ON resistance (C) lower input current (D) higher input impedance
Last Answer : An FET is a better chopper than a BJT because it has lower offset voltage

Show More

678 views 1 answer







What is the difference between BJT and FET?
Last Answer : BJT  is  a  current  opperated   transistor  while  FET   is  a  field   opperated  transistor.

Show More

2.7k views 1 answer







What is a BJT amplifier?
Last Answer : Bilpolar Juntion transistor , this fuction is control the current

Show More

100 views 1 answer







How can BJT be used as an amplifier?

Show More

86 views 0 answers







What is a BJT?
Last Answer : Bipolar Junction Transistor (BJT): BJT is a Bipolar device. (Uses both electrons and holes charge carrier for current conduction) Two Junctions (Emitter junction & collector ... mode (Current amplification) Cutoff mode (Open switch) Saturation mode (Close switch)

Show More

742 views 2 answers






Show More⇦ PreviousNext ⇨