Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Which of the basic parts of a robot unit would include the computer
circuitry that could be programmed to determine what the robot would do?
A : Sensor
B : Controller
C : Arm
D : End effector
by

1 Answer

Answer :

B : Controller
by

Related questions

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Last Answer : b) controller

5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movementd. Gripper 4. Delivers commands to the actuators (A) a-1, b-4, c-2, d-3 (B) a-3, b-4, c-2, d-1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Description : 5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movement d. Gripper 4. Delivers commands to the ... -1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Last Answer : B

Which of the following terms IS NOT one of the five basic parts of a robot? a) peripheral tools b) end effectors c) controller d) drive

Description : Which of the following terms IS NOT one of the five basic parts of a robot? a) peripheral tools b) end effectors c) controller d) drive

Last Answer : a) peripheral tools

Which part of a robot provides motion to the manipulator and end-effectors?  1. Controller  2. Sensor  3. Actuator  4. All of the above

Description : Which part of a robot provides motion to the manipulator and end-effectors?  1. Controller  2. Sensor  3. Actuator  4. All of the above

Last Answer : 3

____ is a collection of mechanical linkage connected by joints a.End effector b.Gripper c.Sensor d.Manipulator

Description : ____ is a collection of mechanical linkage connected by joints a.End effector b.Gripper c.Sensor d.Manipulator

Last Answer : d.Manipulator

____ is a collection of mechanical linkage connected by joints. (A) End effector (B) Gripper (C) Sensor (D) Manipulator

Description : ____ is a collection of mechanical linkage connected by joints. (A) End effector (B) Gripper (C) Sensor (D) Manipulator

Last Answer : D

The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Last Answer : c.Speed of movement

The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Last Answer : C

Draw block diagram of Robot system. List function of end effector.

Description : Draw block diagram of Robot system. List function of end effector.

Last Answer : Diagram:  Functions Of An End Effector : 1. End effector is the device at the end of a robotic arm designed to interact with the environment. 2. End effectors originates from ... link of the robot. It is similar to human hand with or without finger. It incorporates various sensors.

A robot’s “arm” is also known as its __________ a) end effector b) actuator c) manipulator d) servomechanism

Description : A robot’s “arm” is also known as its __________ a) end effector b) actuator c) manipulator d) servomechanism

Last Answer : c) manipulator

A basic touch screen has three main components. It includes touch sensor, controller and ________ A. transmitter B. receiver C. software driver D. None of the Above

Description : A basic touch screen has three main components. It includes touch sensor, controller and ________ A. transmitter B. receiver C. software driver D. None of the Above

Last Answer : C. software driver

The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility

Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility

Last Answer : A : degrees of freedom

A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Description : A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Last Answer : both a and b

If a robot could be programmed to act in a way indistinguishable from human behavior, would you say it has consciousness?

Description : If a robot could be programmed to act in a way indistinguishable from human behavior, would you say it has consciousness?

Last Answer : I’m not yet convinced that a majority of humans is conscious.

If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Description : If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Last Answer : Answer: D

In far from the madding crowd, What if Bathsheba was really an alien-robot who was programmed to fall in love with Gabriel to distract from the pending alien-robot invasion?

Description : In far from the madding crowd, What if Bathsheba was really an alien-robot who was programmed to fall in love with Gabriel to distract from the pending alien-robot invasion?

Last Answer : Oh Dear.

______________ is the smallest microcontrollers which can be programmed to perform a large range of tasks. A. PIC microcontrollers B. ARM microcontrollers C. AVR microcontrollers D. ASIC microcontrollers

Description : ______________ is the smallest microcontrollers which can be programmed to perform a large range of tasks. A. PIC microcontrollers B. ARM microcontrollers C. AVR microcontrollers D. ASIC microcontrollers

Last Answer : A. PIC microcontrollers 

Internal state sensors are used for measuring which of below parameterof the end effector. A : Position B : Position & Velocity C : Velocity & acceleration D : Position, Velocity & acceleration

Description : Internal state sensors are used for measuring which of below parameterof the end effector. A : Position B : Position & Velocity C : Velocity & acceleration D : Position, Velocity & acceleration

Last Answer : D : Position, Velocity & acceleration

The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

Last Answer : a) degrees of freedom

Drives are also known as A : Sensor B : Controller C : Actuators D : Manipulator

Description : Drives are also known as A : Sensor B : Controller C : Actuators D : Manipulator

Last Answer : C : Actuators

Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Description : Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Last Answer : D : Both option 1 and 2 are true

Sensor based servoing associate with A : Robot pose B : Robot action C : Robot position D : Robat path

Description : Sensor based servoing associate with A : Robot pose B : Robot action C : Robot position D : Robat path

Last Answer : A : Robot pose

Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Description : Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Last Answer : D : Both option 1 and 2 are true

Sensor based servoing associate with A : Robot pose B : Robot action C : Robot position D : Robat path

Description : Sensor based servoing associate with A : Robot pose B : Robot action C : Robot position D : Robat path

Last Answer : A : Robot pose

Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Description : Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Last Answer : D : Both option 1 and 2 are true

Sensor based servoing associate with A : Robot pose B : Robot action C : Robot position D : Robat path

Description : Sensor based servoing associate with A : Robot pose B : Robot action C : Robot position D : Robat path

Last Answer : A : Robot pose

Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Description : Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Last Answer : D : Both option 1 and 2 are true

Sensor based servoing associate with A : Robot pose B : Robot action C : Robot position D : Robat path

Description : Sensor based servoing associate with A : Robot pose B : Robot action C : Robot position D : Robat path

Last Answer : A : Robot pose

Which of the following terms refers to the rotational motion of a robot arm A : Swivel B : Axle C : Retrograde D : Roll

Description : Which of the following terms refers to the rotational motion of a robot arm A : Swivel B : Axle C : Retrograde D : Roll

Last Answer : D : Roll

If the control signals are generated by combinational logic, then they are generated by a type of _______________ controlled unit. a) Micro programmed b) Software c) Logic d) Hardwired

Description : If the control signals are generated by combinational logic, then they are generated by a type of _______________ controlled unit. a) Micro programmed b) Software c) Logic d) Hardwired

Last Answer : Answer: d Explanation: The main task of a control unit is to generate control signals. There are two main types of control units: A hardwired control unit generates control ... combinational logic circuits and the Micro programmed control unit generates control signals by using some softwares

What part of a floppy disk drive transport contains the circuitry which controls the electromechanical parts of the transport?

Description : What part of a floppy disk drive transport contains the circuitry which controls the electromechanical parts of the transport?

Last Answer : Drive electronics circuit board.

- In end effector internal state sensors are used for measuring (A) Position (B) Position & Velocity (C) Velocity & Acceleration (D) Position, Velocity & Acceleration

Description : - In end effector internal state sensors are used for measuring (A) Position (B) Position & Velocity (C) Velocity & Acceleration (D) Position, Velocity & Acceleration

Last Answer : D

What is end effector? Give its classification

Description : What is end effector? Give its classification 

Last Answer : In robotics, an end effector is a device or tool that's connected to the end of a robot arm where the hand would be. The end effector is the part of the robot that interacts with the ... designed. Classification:- i) Mechanical clamping ii) Magnetic clamping iii) Vocum (suction) gripping

The ______ can be programmed one time either the manufacturer or the computer user.Once programmed it cannot be modified. A. PROM B. EPROM C. RAM D. ROM

Description : The ______ can be programmed one time either the manufacturer or the computer user.Once programmed it cannot be modified. A. PROM B. EPROM C. RAM D. ROM

Last Answer : D. ROM

Which of the following is true? 1) Plotters are not available for microcomputer systems 2) Micro-computer are not programmed like conventional computers 3) Mini-computers are task-oriented 4) The contents of ROM are easily changed

Description : Which of the following is true? 1) Plotters are not available for microcomputer systems 2) Micro-computer are not programmed like conventional computers 3) Mini-computers are task-oriented 4) The contents of ROM are easily changed

Last Answer : 3) Mini-computers are task-oriented

A controller essentially is a A. Sensor B. Clipper C. Comparator D. Amplifier

Description : A controller essentially is a A. Sensor B. Clipper C. Comparator D. Amplifier

Last Answer : C. Comparator

Define sensor, signal conditioner, controller and actuator in mechatronic system.

Description : Define sensor, signal conditioner, controller and actuator in mechatronic system.

Last Answer : Sensor: - A sensor is an element in a measurements system that acquires a physical parameter and changes it into electrical signal. E.g. Bellows, Thermocouple  Signal Conditioners:- The signal ... brains of control system operation and decide the kind of action taken in response to an error

Which of the following sensor uses a laser beam to determine the distance to an object? A : Sonar B : Radar C : Infrared D : Laser Rangefinder

Description : Which of the following sensor uses a laser beam to determine the distance to an object? A : Sonar B : Radar C : Infrared D : Laser Rangefinder

Last Answer : D : Laser Rangefinder

Pneumatic and Hydraulic system which with or without transmission elements provides motion to robot links is called ____________.  1. Motor  2. Sensor  3. Actuator  4. None of the above

Description : Pneumatic and Hydraulic system which with or without transmission elements provides motion to robot links is called ____________.  1. Motor  2. Sensor  3. Actuator  4. None of the above

Last Answer : Joints

Give classification of robot sensor.

Description : Give classification of robot sensor. 

Last Answer : Classification of Robot Sensor: Robot Sensors senses and capability includes vision and hand eye coordination, touch, hearing, sensors will divided into the following categories.  [1] Vision Sensor: ... and the stored vocabulary word the robot performs some actions which correspond to the word. 

Explain any one non tactile sensor used in robot

Description : Explain any one non tactile sensor used in robot

Last Answer : Non Tactile Sensor  [1] Vision Sensor: Robot vision is made possible by means of video camera, a sufficient light source and a computer programmed to process image data. The camera is mounted ... the input and the stored vocabulary word the robot performs some actions which correspond to the word.

First Generation computers used ______ for Circuitry and ________ for memory (A) Transistor and Magnetic Core (B) IC and Magnetic Memory (C) Vacuum tubes and Magnetic drum (D) IC and Magnetic Core

Description : First Generation computers used ______ for Circuitry and ________ for memory (A) Transistor and Magnetic Core (B) IC and Magnetic Memory (C) Vacuum tubes and Magnetic drum (D) IC and Magnetic Core

Last Answer : (C) Vacuum tubes and Magnetic drum

Which of the following was used as circuitry for first generation of computers? (1) Vacuum tube (2) Transistors (3) Integrated circuits (4) Microprocessors

Description : Which of the following was used as circuitry for first generation of computers? (1) Vacuum tube (2) Transistors (3) Integrated circuits (4) Microprocessors

Last Answer : Vacuum tube

The system unit of a personal computer typically contains all of the following except: A) Microprocessor B) Disk controller C) Serial interface D) Modem

Description : The system unit of a personal computer typically contains all of the following except: A) Microprocessor B) Disk controller C) Serial interface D) Modem

Last Answer : Answer : D

Can Arduino be used for building a robot arm?

Description : Can Arduino be used for building a robot arm?

Last Answer : Yes, Arduino can be used for building a robot arm by using servo motors and sensors to control the movement and position of the arm, and by using communication modules to receive commands from a remote control or a programming interface.

From the following which type of work envelope is made in jointed arm robot a.Rectangular work envelope b.Cylindrical work envelope c.Spherical or hemispherical work envelope d.C

Description : From the following which type of work envelope is made in jointed arm robot a.Rectangular work envelope b.Cylindrical work envelope c.Spherical or hemispherical work envelope d.C

Last Answer : b.Cylindrical work envelope

When was the first industrial arm robot introduced?

Description : When was the first industrial arm robot introduced?

Last Answer : Need answer

Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Description : Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Last Answer : d) roll

The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

Description : The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

Last Answer : d) Place block A on block B

From the following which type of work envelope is made in jointed arm robot. (A) Rectangular work envelope (B) Cylindrical work envelope (C) Spherical or hemispherical work envelope (D) None of the above

Description : From the following which type of work envelope is made in jointed arm robot. (A) Rectangular work envelope (B) Cylindrical work envelope (C) Spherical or hemispherical work envelope (D) None of the above

Last Answer : C