Function of OR Gate its logical symbol and truth table.

Function of OR Gate its logical symbol and truth table.
by

1 Answer

Answer :

Function: - OR gate is used to perform logical addition. So used in adder subtractor and logic circuits where logical Oring is required. Used to implement SOP form equations. Also used in PLA logic.

Logical symbol of OR gate :-

image

Truth table:- 

image

by

Related questions

Sketch symbol of NAND gate and NOR gate.

Description : Sketch symbol of NAND gate and NOR gate.

Last Answer : Symbol of NAND gate and NOR gate

Define multiplexer. Draw logical symbol of 4:1 multiplexer with truth table and output logical equation

Description : Define multiplexer. Draw logical symbol of 4:1 multiplexer with truth table and output logical equation

Last Answer : Multiplexer - it is a combinational circuit which selects one input from several inputs and connects it to the output.  It is a circuit which has N-input and single output is called as multiplexer.

How to Build a Gate

Description : How to Build a Gate

Last Answer : How to Build a Gate Having a gate that is well built and smoothly functioning makes entry and exit to a private space even more rewarding. Whether to keep children or pets in or unwanted animals and ... swinging. Make sure you know which way you want the door to swing before you screw it on.

GATE 2020 syllabus electrical engineering

Description : GATE 2020 syllabus electrical engineering

Last Answer : EE: Electrical Engineering Section 1: Engineering Mathematics Linear Algebra: Matrix Algebra, Systems of linear equations, Eigenvalues, Eigenvectors. Calculus: Mean value theorems, Theorems of ... to dc converters, Single phase and three phase inverters, Sinusoidal pulse width modulation.

Explain MOSFET gate drive circuit and totem pole configuration.

Description : Explain MOSFET gate drive circuit and totem pole configuration.

Last Answer : MOSFET gate drive circuit: The turning on and turning off of MOSFET can be controlled from gate to source voltage signal. If the gate to source voltage of MOSFET exceeds threshold ... this configuration, the two switches (transistors) are used in totem pole arrangement with a comparator.

Explain thyristor gate drive circuit.

Description : Explain thyristor gate drive circuit.

Last Answer : Thyristor Gate Drive Circuit: The thyristor can be turned on by pulse voltage signal at gate terminal and it does not require continuous drive signal like the transistor. The gate ... circuit provide required minimum gate voltage and gate current then the thyristor conducts properly.

What is the propagation delay of a logic gate?

Description : What is the propagation delay of a logic gate?

Last Answer : The application input pulse and the occurrence of resulting output pulse is called propagation delay of logic gate.

What is the purpose of a NAND gate?

Description : What is the purpose of a NAND gate?

Last Answer : Nand gate has 2 inputs and only 1 output and it is equivalent of an and gate. The output of a nand gate is high(1) only when anyone or both inputs are low(0).and the output of nand gate is low(0) only when both the inputs are high(1).nand gate is also called as universal gate.

What is an inverter gate?

Description : What is an inverter gate?

Last Answer : Not gate is known as inverter gate as it inverts the I/P

What does the AND gate do?

Description : What does the AND gate do?

Last Answer : AND gate multiple two inputs. If any one input is zero output will be zero if both inputs are one then only output is one.

Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses.

Description : Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses. 

Last Answer : MOSFET is metal oxide field effect transistor. MOSFET is a voltage controlled device. MOSFET is majority carrier device. MOSFET are of two one is n-channel MOSFET and p-channel MOSFET. Gate, ... . Hence, power MOSFET is operated at high enough gate-source voltage to minimize the conduction losses.

basic gate drive circuit of GTO

Description : basic gate drive circuit of GTO

Last Answer : basic gate drive circuit of GTO

can we turn off thyristor using Gate?

Last Answer : No we cannot turn off normal thyristor using Gate.

what is gate turn off thyristor (GTO)?

Description : Draw the structural diagram of GTO. Explain briefly the switching behavior of GTO with the help of appropriate voltage and current waveform.

Last Answer : Gate Turn Off Thyristor (GTO) Conventional Thyristor can be turned on with gate terminal but can not turn off from gate terminal. But in case of Gate Turn Off Thyristor (GTO), we can turn it on and off ... subdivided as storage period (Ts), fall period (Tp) and tail period (Tt).

Which is a semiconductor: copper, silicon, or neon?

Description : Which is a semiconductor: copper, silicon, or neon?

Last Answer : Copper is a metal. Silicon is a semiconductor. Neon is inert gas.

Which is the best conductor: silver, carbon, or iron?

Description : Which is the best conductor: silver, carbon, or iron?

Last Answer : Silver is the best conductor. Carbon is the semiconductor. Iron have less conductance as compared to silver.

Which have more free electrons: conductors or insulators?

Description : Which have more free electrons: conductors or insulators? 

Last Answer : Conductors have many free electrons whereas insulators have very few or none at all.

Is the power line voltage available in our homes a dc or an ac voltage?

Description : Is the power line voltage available in our homes a dc or an ac voltage?

Last Answer : The power line voltage available in our homes is AC. Mobile dwellings are the most commonly DC-supplied homes and even then they tend to include AC supply for heavier loads.

This book, including all its chapters,_____ interesting. The students as well as the instructor in ______ agreement about it. (A) is, was (B) are, are (C) is, are (D) were, was

Description : This book, including all its chapters,_____ interesting. The students as well as the instructor in ______ agreement about it. (A) is, was (B) are, are (C) is, are (D) were, was

Last Answer : c

Draw the symbol, logic expression and truth table of NOR gate.

Description : Draw the symbol, logic expression and truth table of NOR gate.

Last Answer : symbol, logic expression and truth table of NOR gate

Shaquille O’ Neal is a 60% career free throw shooter, meaning that he successfully makes 60 free throws out of 100 attempts on average. What is the probability that he will successfully make exactly 6 free throws in 10 attempts? (A) 0.2508 (B) 0.2816 (C) 0.2934 (D) 0.6000

Description : Shaquille O’ Neal is a 60% career free throw shooter, meaning that he successfully makes 60 free throws out of 100 attempts on average. What is the probability that he will successfully make exactly 6 free throws in 10 attempts? (A) 0.2508 (B) 0.2816 (C) 0.2934 (D) 0.6000

Last Answer : Correct option is (A).

Sourya committee had proposed the establishment of sourya institutes of Technology (SITs) in line with Indian Institutes of Technology (IITs) to cater to the technological and industrial needs of a developing country Which of the following can be logically inferred from the above sentence? Based on the proposal, (i) In the initial years, SIT students will get degrees from IIT. (ii) SITs will have a distinct national objective. (iii) SITs like institutions can only be established in consultation with IIT. (iv) SITs will serve technological needs of a developing country. (A) (iii) and (iv) only (B) (i) and (iv) only (C) (ii) and (iv) only (D) (ii) and (iii) only

Description : Sourya committee had proposed the establishment of sourya institutes of Technology (SITs) in line with Indian Institutes of Technology (IITs) to cater to the technological and industrial needs of a developing country Which of the ... (iv) only (C) (ii) and (iv) only (D) (ii) and (iii) only

Last Answer : Correct option is (C). Option (i) and (iii) state phrases like ‘in the initial years’ and ‘SIT like institutions can only be established in consultation with IIT’ cannot be logically inferred so (ii) and (iv) are the best inferences i.e. option (C) 

A poll of students appearing for masters in engineering indicating that 60% of the students believed that mechanical engineering is a profession unsuitable for women. A research study on women with master or higher degrees in mechanical engineering found that 90% of such women were successful in their professions. Which of the following can be logically inferred from the above paragraph? (A) Many students have misconceptions regarding various engineering disciplines. (B) Men with advanced degrees in mechanical engineering believe women are well suited to be mechanical engineers. (C) Mechanical engineering is a profession well suited for women with masters or higher degrees in mechanical engineering. (D) The number of women pursing higher degrees in mechanical engineering is small.

Description : A poll of students appearing for masters in engineering indicating that 60% of the students believed that mechanical engineering is a profession unsuitable for women. A research study on women with ... engineering. (D) The number of women pursing higher degrees in mechanical engineering is small.

Last Answer : Correct option is (C). A poll says that women with masters or higher degrees in mechanical engineers are successful in their professions. This statement leads to the option (C) which is the best inference

The following graph represents the installed capacity for cement production (in tonnes) and the actual production (in tonnes) of nine cement plants of a cement company. Capacity utilization of a plant is defined as ratio of actual production of cement to installed capacity. A plant with installed capacity of at least 200 tonnes is called a large plant and a plant with lesser capacity is called a small plant. The difference between total production of large plants and small plants, in tonnes is _____

Description : The following graph represents the installed capacity for cement production (in tonnes) and the actual production (in tonnes) of nine cement plants of a cement company. Capacity utilization of a plant ... difference between total production of large plants and small plants, in tonnes is _____

Last Answer : Correct answer is 120.

If | | 9 6 y − = 3, then y y 3 2 4 - is _____ (A) 0 (B) 3 +1 (C) 3 1 - (D) undefined

Description : ........

Last Answer : Correct option is (C). 

R2D2 is a robot. R2D2 can repair aeroplanes. No other robot can repair aeroplanes. Which of the following can be logically inferred from the above statements? (A) R2D2 is a robot which can only repair aeroplanes. (B) R2D2 is the only robot which can repair aeroplanes. (C) R2D2 is a robot which can repair only aeroplanes. (D) Only R2D2 is a robot.

Description : R2D2 is a robot. R2D2 can repair aeroplanes. No other robot can repair aeroplanes. Which of the following can be logically inferred from the above statements? (A) R2D2 is a robot which can only repair aeroplanes. ... . (C) R2D2 is a robot which can repair only aeroplanes. (D) Only R2D2 is a robot.

Last Answer : Correct option is (B). The statement ‘No other robot can repair aeroplanes’ means R2D2 is the only robot which can repair aeroplanes so option (B) is the best inference

Pick the odd one out in the following: 13, 23, 33, 43, 53 (A) 23 (B) 33 (C) 43 (D) 53

Description : Pick the odd one out in the following: 13, 23, 33, 43, 53 (A) 23 (B) 33 (C) 43 (D) 53

Last Answer : Correct option is (B). In the group of given numbers, all are prime numbers but 33 is not

Identify the correct spelling out of the given options: (A) Managable (B) Manageable (C) Mangaeble (D) Managible

Description : Identify the correct spelling out of the given options: (A) Managable (B) Manageable (C) Mangaeble (D) Managible

Last Answer : Correct option is (B). ‘manageable’ is the correct spelling

The chairman requested the aggrieved shareholders to _____ him. (A) bare with (B) bore with (C) bear with (D) bare

Description : The chairman requested the aggrieved shareholders to _____ him. (A) bare with (B) bore with (C) bear with (D) bare

Last Answer : Correct option is (C). ‘bear with’ means to be patient with some one

In the circuit shown below, the current through the inductor is,

Description : In the circuit shown below, the current through the inductor is,

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Why NAND and NOR gate are called as universal gate? Draw AND gate using NAND gate only.

Description : Why NAND and NOR gate are called as universal gate? Draw AND gate using NAND gate only. 

Last Answer : Universal gate - All basic gates functionality can be implemented using NAND and NOR gate hence these gates are called as universal gates.  AND gate using NAND gate

An OR gate has 6 inputs. The number of input words in its truth table are

Last Answer : An OR gate has 6 inputs. The number of input words in its truth table are 64.

Which set of truth table input signals will result in an output signal value of 1 from the 'AND' gate as shown in the illustration? EL-0035 A. 1-Jan B. Jan-00 C. 0-1 D. 0-0

Description : Which set of truth table input signals will result in an output signal value of 1 from the 'AND' gate as shown in the illustration? EL-0035 A. 1-Jan B. Jan-00 C. 0-1 D. 0-0

Last Answer : Answer: A

Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Description : Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Last Answer : Configuration - Common Emitter Common Collector Common Base

In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Description : In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Last Answer : Answer: D

What is the number of rows of a logical gate with three inputs ?

Description : What is the number of rows of a logical gate with three inputs ?

Last Answer : There are 8 rows of logical gates with three inputs .

Draw a labelled pin diagram of IC-555 and state function of each pin

Description : Draw a labelled pin diagram of IC-555 and state function of each pin

Last Answer : Pin Name Purpose 1 GND Ground reference voltage, low level (0 V)  2 TRIG The OUT pin goes high and a timing interval starts when this input falls below 1/2 of ... 8 Vcc Positive supply voltage, which is usually between 3 and 15 V depending on the variation.

Which is not a desirable property of a logical rule-based system? a) Locality b) Attachment c) Detachment d) Truth-Functionality e) Global attribute

Description : Which is not a desirable property of a logical rule-based system? a) Locality b) Attachment c) Detachment d) Truth-Functionality e) Global attribute

Last Answer : b) Attachment

Structure of logical argument is based on: (A) Formal validity (B) Material truth (C) Linguistic expression (D) Aptness of examples

Description : Structure of logical argument is based on: (A) Formal validity (B) Material truth (C) Linguistic expression (D) Aptness of examples

Last Answer : (A) Formal validity

Logical reasoning is based on: (A) Truth of involved propositions (B) Valid relation among the involved propositions (C) Employment of symbolic language (D) Employment of ordinary language

Description : Logical reasoning is based on: (A) Truth of involved propositions (B) Valid relation among the involved propositions (C) Employment of symbolic language (D) Employment of ordinary language

Last Answer : (B) Valid relation among the involved propositions

The sum of product expression for a Boolean function can be derived from its truth table by

Description : The sum of product expression for a Boolean function can be derived from its truth table by (a) AND operation of the product terms. (b) NOR operation of the product terms. (c) OR operation of the product terms. (d) NAND operation of the product terms.

Last Answer : C. OR operation of the product terms

What is the symbol of truth ?

Last Answer : The symbol of truth is the Prophet.

Give the speciality of zener diode. State its 2-3 applications

Description : Give the speciality of zener diode. State its 2-3 applications

Last Answer : Speciality - This diode can keep breakdown voltage constant across it. It is used in reverse bias. Applications - Zener diodes voltage regulation as reference elements surge suppressors switching applications clipper circuits.

Comparison of three configuration of BJT

Description : Comparison of three configuration of BJT

Last Answer : Parameter Common Base(CB) Common Emitter (CE) Common collector (CC) Input terminal  Emitter Base Base Common terminal Base Emitter Collector Output terminal Collector Collector Emitter Gain factor Alpha(Ic/Ie) Beta(Ic/Ib) Gamma(Ie/Ib)

Piezo-electric effect

Description : Piezo-electric effect

Last Answer : Piezoelectric Effect is the ability of certain materials to generate an electric charge in response to applied mechanical stress. The word Piezoelectric is derived from the Greek piezein, which means to squeeze or ... Storage Temperature Range: -55 to + 125°C Insulation Resistance: 500 M ohms

Shift Register

Description : Shift Register

Last Answer : Shift Register:- Shift Register is a group of flipflops used to shift data from one side to other side or to convert serial data into parallel or vice versa. Shift registers are of following types  i) ... iii) Parallel in serial out(PISO) iv) Parallel in parallel out(PIPO)

Comparison of BJT and FET

Description : Comparison of BJT and FET

Last Answer : FET BJT It is unipolar device i.e. current in the device is carried either by electrons or holes It is bipolar device i.e. current in the device is carried either by both ... is comparatively more noisy. It is relatively immune to radiation. It is susceptible to radiation

Selection Criteria of PLC

Description : Selection Criteria of PLC

Last Answer : Selection criteria :- To select PLC for any particular application following points are to be considered. a) Type of PLC: Analog or Digital b) Number of inputs and outputs to PLC c) Operating voltage ... Type of memory of PLC g) Type of programming h) Reliability of PLC i) Flexibility of PLC

List various elements of mechatronic system and state applications.

Description : List various elements of mechatronic system and state applications.

Last Answer : Elements Sensors. Actuators (Hydraulics, Phnumetics) PLC, Micro controllers. Electrical Motors. Mechanical Couplings, Assembly & Gears. Control Panel. Applications ... washer and washing machines. automatic air conditioning systems unmanned aerial vehicles and automatic pilots.