Piezo-electric effect

1 Answer

Answer :

Piezoelectric Effect is the ability of certain materials to generate an electric charge in response to applied mechanical stress. The word Piezoelectric is derived from the Greek piezein, which means to squeeze or press, and piezo, which is Greek for “push” 

Features of Crystal Oscillator:-

• 18pF of Load Capacitance

• Frequency Tolerance(Ƹf/f) range is ± 30ppm

• Frequency Temperature Stability range is ±50ppm

• Resonance Resistance 40ohms (max)

• Oscillation mode: Fundamental mode

• Shunt Capacitance less than 7pF

• Drive Level less than 100µW

• Operating Temperature Range: -20 to + 70°C

• Operable Temperature Range: -25 to + 85°C

• Storage Temperature Range: -55 to + 125°C

• Insulation Resistance: 500 M ohms

Related questions

Description : State principle of operation of piezo-electric transducer. State its application.

Last Answer : The piezoelectric element used for converting mechanical movement into electric signals. The mechanical deformation generates charges and this charge appears as a voltage across the electrodes.  ... destructive test (NDT) equipments 6. Piezoelectric materials are used in ultrasonic transducers. 

Description : A piezo-electric type pressure sensor has a sensitivity of 1 mV/kPa and a bandwidth of 300 Hz to 300 kHz. For a constant (dc) pressure of 100 kPa, the steady state output of the sensor in millivolt is (A) 0 (B) 2 (C) 4 (D) 6

Last Answer : A piezo-electric type pressure sensor has a sensitivity of 1 mV/kPa and a bandwidth of 300 Hz to 300 kHz. For a constant (dc) pressure of 100 kPa, the steady state output of the sensor in millivolt is 0

Description : How could I get a flashing effect for video wallpaper?

Last Answer : The picture is hidden behind a login form, could you put it on, say, imageshack.us?

Description : How Does Obesity Effect Diabetes ?

Last Answer : How Does Obesity Effect Diabetes Obesity and diabetes are two diseases that are cause for serious concern among many Americans. Every year, more and more overweight and obese people run the risk of developing ... , you can win the battle against obesity, and save your own life at the same time.

Description :  State the disadvantages of skin effect.

Last Answer : Disadvantages of skin effect:- 1. Full cross section of conductor is not utilized, Therefore effective area of conductor reduces so its resistance increases. 2. Due to increase in resistance, copper ... increases (Since Voltage drop = IR ) 5. So voltage regulation becomes poor (increases) 

Description : State the meaning of ferranti effect and proximity effect.  

Last Answer : i) Ferranti effect : When long distance transmission is lightly loaded or there is no load condition than it is observe that receiving end voltage (VR) is found to be greater than sending end ... on conductor causes current in each conductor is re-distributed. This is known as proximity effect.

Description : State the meaning of skin effect and how can it be minimised. 

Last Answer : Meaning of skin effect :  When alternating current flows through conductor it has tendency to flow away from center of conductor. i.e. maximum current density is near skin of conductor and goes on ... whenever possible as Skin effect is absent (Since frequency 0) instead of A.C. supply.  

Description : Define armature reaction in an alternator. Explain the effect of armature reaction at various P.F. of loads of alternator.

Last Answer : Armature Reaction: The effect of armature flux on main flux is called as armature reaction.  Armature Reaction at Various Power Factors: When armature is loaded, the armature flux modifies ... lagging p.f. For capacitive loads the effect of flux is partly distorting and partly strengthening.

Description : List out factors affecting proximity effect. 

Last Answer : Factors affecting proximity effect: 1. Conductor size (diameter of conductor) 2. Frequency of supply current. 3. Distance between conductors. 4. Permeability of conductor material 

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Last Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Last Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

Description : Under Following conditions Ferranti effect occurs: 

Last Answer : Under Following conditions Ferranti effect occurs:  1. When there is no load on transmission line (IL = 0) 2. When There is no load at receiving sub-station or Lightly loaded 3. When ... VR) is found to be greater than sending end voltage (VS). This phenomenon is known as Ferranti effect.

Description : Explain in brief ‘Hall effect sensor’. 

Last Answer : Working: * Working principle of a Hall effect sensor is that if strip of conducting material carries a current in presence of transverse magnetic field as shown fig . * The difference of ... with Hall strip. * When a transverse magnetic field passes through the strip, the voltage difference 

Last Answer : The phenomenon of ionization of surrounding air around the conductor due to which luminous glow with hissing noise is rise is known as the corona effect.

Description : State seeback effect. Describe the working of thermocouple.

Last Answer : Seebeck effect: Seebeck effect states that whenever two dissimilar metals are connected together to form two junctions out of which, one junction is subjected to high temperature and another is subjected to ... both the junctions a very low emf is produced which causes a current in the circuit. 

Description : What is piezoelectric effect? Name two piezoelectric material.

Last Answer : piezoelectric effect: Piezoelectric effect can be stated as follows: when a pressure or force or vibration is applied to crystalline material like quartz crystal or crystalline substances, then ... crystal: Quartz crystal ,Rochelle salt 2) Synthetic crystals : Barium Titanate, Lithium sulphate

Description : Explain magnetic effect employed in measuring instrument.

Last Answer : Magnetic Effect:  I) In PMMC meters:  ➢ When a current is passed through a conductor, magnetic field is produced round the conductor. Due to this field when current ... field it experiences a mechanical force.  Examples: Electrodynamometer type instruments, Induction type instrument. 

Description : Define junction field effect transistor (JFET) and give an example.

Last Answer : Junction Field-Effect Transistor: It is a semiconductor device having three terminals, namely Gate, Drain and Source, in which the current flow is controlled by an electric field set up by an external voltage applied ... : i) n-channel JFET and ii) p-channel JFET Examples of JFET: BFW 10, BFW 11 

Description : When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) When the Drain voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage 

Last Answer : When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) ... voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage 

Description : The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get decreased B) Both distortion and bandwidth get increased C) Distortion is reduced and bandwidth is increased D) Distortion is increased and bandwidth is decreased 

Last Answer : The effect of negative feedback on distortion and bandwidth is Distortion is reduced and bandwidth is increased

Description : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the _______ of conductor.  (1) Surface (2) Center (3) Complete cross section area (4) Axis

Last Answer : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the Surface of conductor. 

Description : Ferranti Effect is more pronounced when ___________ A) the line is longer and the voltage applied is higher B) the line is shorter and the voltage applied is lower C) the line is shorter and the voltage applied is higher D) none of these

Last Answer : Ferranti Effect is more pronounced when the line is longer and the voltage applied is higher

Description : Skin effect is absent in which of the following transmission systems? A) Extra High Voltage (EHV) AC B) High Voltage Direct Current (HVDC) C) Both A and B D) None of these

Last Answer : Skin effect is absent in which of the following transmission systems? A) Extra High Voltage (EHV) AC B) High Voltage Direct Current (HVDC) C) Both A and B D) None of these

Description : The effect of increasing load on a synchronous motor running with normal excitation is (A) Increase both its Ia and power factor. (B) Decrease Ia, but increase power factor. (C) Increase Ia, but decrease power factor (D) Decrease both Ia and power factor.

Last Answer : The effect of increasing load on a synchronous motor running with normal excitation is Increase Ia, but decrease power factor

Description : The effect of a finite gain of an operational amplifier used in an integrator is that (A) it would not integrate (B) the slope of the output will vary with time (C) the final value of the output voltage will reduce (D) there will be instability in the circuit

Last Answer : The effect of a finite gain of an operational amplifier used in an integrator is that there will be instability in the circuit

Description : Skin effect occurs when a conductor carries current at_____ frequencies.

Last Answer : Skin effect occurs when a conductor carries current at high frequencies.

Last Answer : The chemical effect of current is used in D.C. ammeter hour meter.

Description : Diversity factor has direct effect on the?

Last Answer : Diversity factor has direct effect on the fixed cost of unit generated.

Description : Explain hysteresis loss, eddy current loss and skin effect limitations with reference to magnetic material.

Last Answer : Hysteresis loss: Hysteresis loss is a loss which occurs due to the friction of magnetic domain due to the change in magnetic field in ferromagnetic material like iron. Hysteresis loss causes power loss ... loss in transformer is given by, We=Kef2Kf2Bm2watts Skin effect limitations:

Description : What are the applications of Hall effect?

Last Answer : Hall effect transducer find application 8n instruments that measure magnetic field with small flux densities.

Description : explain skin effect in copper interconnects. what are the various ways of reducing this effect?

Last Answer : Skin effect generally observed in ac conductor in transmission network, in skin the current flowing through outer layer of conductor is more than iner area of conductor thus we can say the ... for reducing this effect we can use boundel conductor or used hollow conductor for power transmission

Description : when the skin effect occurs ?

Last Answer : skin effect is occur at higher frequencies when skin depth is smaller

Description : what is skin effect?

Last Answer : Skin effect is occurs in conductor due to high frequency...as the frequency increases the resistance of conductor increases...skin effect means the current flow through the skin of conductor....as the ... dc current their will be no skin effect...I hope you understand basic concept of skin effect

Description : what is Ferranti effect?

Last Answer : Ferranti effect is the increase in voltage at receiving end than sending end means sending end voltage is less than receiving end . It is occurs in long transmission line when the line is lightly loaded or at no load.

Description : Quartz crystal in quartz watches work on the principle called? A. Photoelectric effect B. Stark effect C. Thermionic effect D. Piezo-electric effect (Answer) E. None of these

Last Answer : D. Piezo-electric effect (Answer)

Description : What is piezo electric effect? Name two piezo electric materials.

Last Answer : Piezoelectric Effect: - When pressure or force is applied on piezoelectric crystals such as quartz crystal then an electric charge is generated across that crystal. OR Piezoelectric Effect is the ability ... Topaz 5. Tourmaline 6. lead titanate 7. lead zirconate titanate 8. lithium sulphate

Description : Ultrasonic waves are produced by making use of - (1) ferro magnetic material (2) ferri magnetic material (3) piezo electric material (4) pyro electrical material

Last Answer : (3) piezo electric material Explanation: In most applications, ultrasonic waves are generated by a transducer that includes a piezoelectric material (crystal) that converts electrical energy (electric current) to mechanical energy (sound waves).

Description : Explain Piezo-electric transducer with diagram. State its applications, advantages and disadvantages.

Last Answer : Explanation: Principle of operation: When a pressure or force or vibration applied to the crystalline material like quartz crystal or crystalline substances then an e.m.f. is generated across the ... destructive test (NDT) equipment's 4) Piezoelectric materials are use in ultrasonic transducers.

Description :  Piezo-electric transducers are: -  a) passive transducers b) active transducers c) inverse transducer d) active and inverse transducers

Last Answer :  Piezo-electric transducers are: -  active and inverse transducers

Description : What is a piezo buzzer in Arduino?

Last Answer : A piezo buzzer in Arduino is a small electronic component that can be used to generate simple tones or beeps.

Description : Which type of stone in making piezo electricity?

Last Answer : The most well known, and the first piezoelectric material used in electronic devices is the quartz crystal. Other naturally occurring piezoelectric materials include cane sugar, Rochelle salt, topaz, tourmaline, and even bone.

Description : Explain the concept of piezo-electricity and give its two applications.

Last Answer : Concept of piezoelectricity:- The phenomenon in which production of polarization, takes place when mechanical stress is applied. Piezoelectricity is a special property of certain material which ... ceramics as oscillators that generate predictable and stable signals at RF (radio frequencies)

Description : If Poisson's ratio of a resistance wire strain gauge is 1.8, then neglecting piezo-resistive effects, its Gauge factor is :  (A) 2.8 (B) 2.6 (C) 4.6 (D) 3.6

Last Answer : If Poisson's ratio of a resistance wire strain gauge is 1.8, then neglecting piezo-resistive effects, its Gauge factor is : 4.6

Description : Comparison of three configuration of BJT

Last Answer : Parameter Common Base(CB) Common Emitter (CE) Common collector (CC) Input terminal  Emitter Base Base Common terminal Base Emitter Collector Output terminal Collector Collector Emitter Gain factor Alpha(Ic/Ie) Beta(Ic/Ib) Gamma(Ie/Ib)

Description : Shift Register

Last Answer : Shift Register:- Shift Register is a group of flipflops used to shift data from one side to other side or to convert serial data into parallel or vice versa. Shift registers are of following types  i) ... iii) Parallel in serial out(PISO) iv) Parallel in parallel out(PIPO)

Description : Comparison of BJT and FET

Last Answer : FET BJT It is unipolar device i.e. current in the device is carried either by electrons or holes It is bipolar device i.e. current in the device is carried either by both ... is comparatively more noisy. It is relatively immune to radiation. It is susceptible to radiation

Description : Selection Criteria of PLC

Last Answer : Selection criteria :- To select PLC for any particular application following points are to be considered. a) Type of PLC: Analog or Digital b) Number of inputs and outputs to PLC c) Operating voltage ... Type of memory of PLC g) Type of programming h) Reliability of PLC i) Flexibility of PLC

Description : Function of OR Gate its logical symbol and truth table.

Last Answer : Function: - OR gate is used to perform logical addition. So used in adder subtractor and logic circuits where logical Oring is required. Used to implement SOP form equations. Also used in PLA logic. Logical symbol of OR gate :- Truth table:- 

Description : List various elements of mechatronic system and state applications.

Last Answer : Elements Sensors. Actuators (Hydraulics, Phnumetics) PLC, Micro controllers. Electrical Motors. Mechanical Couplings, Assembly & Gears. Control Panel. Applications ... washer and washing machines. automatic air conditioning systems unmanned aerial vehicles and automatic pilots.