State some thermocouple. 

1 Answer

Answer :

Copper – constantan, Iron – constantan.  

Related questions

Description : The sensor connected to 'signal conditioner' (6000F125) shown in the illustration is a/an ______________. EL-0094 A. thermocouple B. transducer C. inverter D. RTD

Last Answer : Answer: B

Description : The sensor connected to 'signal conditioner' (6000AH170) shown in the illustration is a/an _____________. EL-0094 A. thermocouple B. transducer C. inverter D. RTD

Last Answer : Answer: A

Description : The sensor connected to 'signal conditioner' (6000F085) shown in the illustration is a/an ______________. EL-0094 A. thermocouple B. transducer C. inverter D. RTD

Last Answer : Answer: D

Description : Which sensor shown in the illustration develops its own conditioning and point setting and 'reports' directly to the 'annunciator'? EL-0094 A. Transducer B. Resistance Temperature Detector (RTD) C. Pressure Switch D. Thermocouple

Last Answer : Answer: C

Description : Which of the following devices should be used to measure the temperature of a battery electrolyte? A. Mercury thermometer B. Alcohol thermometer C. Thermocouple pyrometer D. Potentiometer

Last Answer : Answer: B

Description : What is the equation for resistance measurement of PT 100 thermocouple? 

Last Answer : °C = (R-100) / 0.39  

Description : Thermocouple is used to measure a) AC b) DC c) Both d) None

Last Answer : Ans: Both

Description : state properties that makes thermocouple very sensitive?

Last Answer : it measures temperatures between -250 and 1600 degree and it can measure a wider range of temperatures

Description : State seeback effect. Describe the working of thermocouple.

Last Answer : Seebeck effect: Seebeck effect states that whenever two dissimilar metals are connected together to form two junctions out of which, one junction is subjected to high temperature and another is subjected to ... both the junctions a very low emf is produced which causes a current in the circuit. 

Description : State working principle of thermocouple.

Last Answer : Working principle of thermocouple. When heat is applied to junction (hot junction) of the two dissimilar metals, an emf is generated which can be measured at the other junction (cold junction). The two ... as a result of the generated emf. This current will continue to flow as long as T1>T2.

Description : What is Thermocouple ?

Last Answer : : Thermocouple is a metalic bar that can be used to measure the temperature of a place. Thermocouple is an analog sensor. It is used to measure temperature. In thermocouples thermo or tharmal means ... has two terminals, one positive and the other negative. It is measured in meter voltage mode.

Description : Thermocouple How It is Work By ?

Last Answer : Thermocouple A metalic bar , whose With the help No Of space Temperature Measurement To do Goes Thermocouple a _ Analog Sensor This is it Temperature Measurement To do At work Use Is . ???? ... _ Two Terminal Stays A Positive And The other Negative. This Meters Voltage Mode To measure Is.

Description : What is the energy conversion for a thermocouple?

Last Answer : A thermocouple uses the thermoelectric effect to do what it does. Thermal energy (heat) is converted into a difference of potential, which is electric (electromagnetic) energy.

Description : The instrument used to regulate temperature to a particular degree is called : (1) Thermostat (2) Thermometer (3) Pyrometer (4) Thermocouple

Last Answer : (1) Thermostat Explanation: A thermostat is a component which senses the temperature of a system so that the system's temperature is maintained near a desired set point. At its core, a thermostat is simply the controls used to regulate temperature in a heating system.

Description : Conversion of heat into electrical er is achieved by using – (1) Ammeter (2) Hydrometer (3) Voltmeter (4) Thermocouple

Last Answer : (4) Thermocouple Explanation: Thermoelectric generators convert thermal energy into electricity by using heat from the body - or any object with a temperature gradient - as their energy source. ... energy into electricity. Bismuth telluride and its alloys are commonly used in thermocouples.

Description : Thermocouple is suitable for measuring (A) Liquid temperatures only (B) Very high temperatures only (C) Very low temperatures only (D) Both high and low temperatures

Last Answer : (D) Both high and low temperatures

Description : When a bare thermocouple is covered by a protective sheath, the response becomes (A) Faster and oscillatory (B) Faster and non-oscillatory (C) Slower and oscillatory (D) Slower and non-oscillatory

Last Answer : (D) Slower and non-oscillatory

Description : An alloy used as thermocouple material comprises of 40% nickel and60% copper. It is called (A) Constantan (B) Kanthal (C) Chromel (D) German silver

Last Answer : (A) Constantan

Description : The following thermocouple may be used for measuring temperature upto 1873°K. (A) Chromel-alumel (B) Copper-constantan (C) Platinum-platinum rhodium (D) Iron-constantan

Last Answer : (C) Platinum-platinum rhodium

Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Last Answer : Option A

Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Last Answer : Option A

Description : Pressure is measured with the help of A. Manometer. C) Thermocouple. B. Ammeter. D) Orifice plate.

Last Answer : manometer

Description : What device measures infrared radiation below?  a. thermocouple  b. thermopile  c. thermodynamic device  d. thermos

Last Answer : thermopile

Description : A _______ is used to measure the stator % winding temperature of the generator. (a) thermocouple (b) pyrometer (c) resistance thermometer (d) thermometer

Last Answer : (c) resistance thermometer

Description : To protect most of the electrical equipment handling low power, the types of relays used are (a) thermocouple (b) electronic and bimetallic (c) both (a) and (b) (d) none of the above

Last Answer : (c) both (a) and (b)

Description : A thermocouple is a device that produces voltage by what method?

Last Answer : Heat.

Description : The output voltage of a thermocouple

Last Answer : increases with temperature

Description : What is the typical power range for thermocouple sensors?

Last Answer : 0.1uW to 100mW

Description : A thermocouple is used to measure w) pressure x) current y) strain z) temperature

Last Answer : ANSWER: Z -- TEMPERATURE  

Description : Name the material used and the sensitivity of following thermocouple type: (i) J (ii) K (iii) R (iv) S

Last Answer : Material used and the sensitivity of following thermocouple:

Description : Conversion of heat into electrical er is achieved by using : (1) Ammeter (2) Hydrometer (3) Voltmeter (4) Thermocouple

Last Answer : Thermocouple

Description : Compare thermistor and thermocouple.

Last Answer : Sr.No. Parameter Thermistor Thermocouple 1 Materials Metal oxides Two dissimilar metals 2 Response Nonlinear Linear 3 Range of temperature -1500C ... passive Passive active 6 Transduction principle Resistive transducer Thermo electric effect

Description : List applications of thermocouple and thermistors.

Last Answer : Applications of Thermistors: 1. Widely used in the applications of the range from - 60oC to + 15oC. 2. Used as a sensor in liquid level, pressure, flow measurement systems. 3. Used for measurement ... 2. It is used for temperature measurement in cryogenic range. 3. It is used for flow measurement.

Description :  The use of thermocouple meters for AC measurement leads to a meterscale which is _____.

Last Answer :  The use of thermocouple meters for AC measurement leads to a meterscale which is square law.

Description : Which one of the following is not a transducer in the true sense?   (A) Thermocouple (B) Piezoelectric pick-up (C) Photo voltaic cell (D) LCD.

Last Answer : Which one of the following is not a transducer in the true sense?   (A) Thermocouple (B) Piezoelectric pick-up (C) Photo voltaic cell (D) LCD.

Description : Thermocouple instruments can be used for a frequency range upto   (a) 100Hz (b) 5000 Hz (c) 1 MHz (d) 50 MHz and above 

Last Answer : Thermocouple instruments can be used for a frequency range upto 50 MHz and above 

Description : Principle of Thermocouple is based on :  (A) Thomson effect (C) Seebeck effect (B) Peltier effect (D) Kelvin effect

Last Answer :  The  principle is  based on Seebeck   effect.

Description : Consider the following transducers : 1. LVDT 2. Piezoelectric 3. Thermocouple 4. Photovoltaic cell  Which of the above are active transducers ?

Last Answer : Consider the following transducers : 1. LVDT 2. Piezoelectric 3. Thermocouple 4. Photovoltaic cell Which of the above are active transducers ? 2, 3 and 4

Description : Thermocouple is used to measure : - a) AC b) DC c) Both d) None

Last Answer : Thermocouple is used to measure : - a) AC b) DC c) Both d) None

Description : A true rms reading voltmeter uses two thermocouple in order: -  a) to increase sensitivity b) that a second thermocouple cancels out the no linear effect of the first thermocouple c) to prevent drift in the dic. Amplifier d) all of the above

Last Answer : A true rms reading voltmeter uses two thermocouple in order: -  that a second thermocouple cancels out the no linear effect of the first thermocouple

Last Answer : Thermocouple instruments are also known as Rectifier instruments.

Last Answer : The thermocouple instruments do not have High degree of measuring accuracy.

Description : What are the applications of thermocouple?

Last Answer : Used  as  a  rectifier  instrument.