What are the enclosures used for HT and LT motors?

1 Answer

Answer :

LT motors (<200 kW)

a. Open drip proof.

b. TEFC.

c. Totally enclosed air over type.

HT motors (>200 kW)

a. Open drip proof.

b. Weather protected I

c. Weather protected II

d. Totally enclosed water-cooled.

e. Totally enclosed pipe ventilated. 

Related questions

Description : What is HT and LT control panels?

Last Answer : HT Panel is like LT Panel except that it is used for high tension cables. LT Panels :LT Panel is an electrical distribution board that receives power from generator or transformer and distributes the same to various electronic devices and distribution boards. 

Description : State types of enclosures for electric motors. 

Last Answer : Types of enclosures for Electric Motor:  i) Open type enclosure:-  ii) Screen Protected enclosure  iii) Drip proof (moisture) enclosure:  iv) Flame (Fire) proof enclosure:-  v) Totally enclosed type enclosure:-  vi) Pipe ventilated totally enclosed type enclosure:

Description : What is use of lockout relay in ht voltage?

Last Answer : Answer:A lock-out relay is generally placed in line before or after the e-stop switch so the power can be shut off at one central location. This relay is powered by the same electrical source as ... allows the control power for multiple machines to be locked out by the turn of a single key switch.

Description : Why humming sound occurred in HT transmission line?

Last Answer :  This sound is coming due to ionization (breakdown of air into charged particles) of air around transmission conductor. This effect is called as Corona effect, and it is considered as power loss.

Description : How do i build electronic enclosures?

Last Answer : There are several online sources that offer directions for building electronic enclosures. You can also buy the building materials on these websites.

Description : What are electronic enclosures?

Last Answer : Electronic enclosures in simple mans terms are outer shells of electronic equipments. These enclosure can be handheld, wall mount, desktop or multipurpose enclosure.

Description : Is it difficult to install TV wall mount enclosures?

Last Answer : It is not difficult to install television wall mount enclosures. This is a do it yourself project. You should get instructions and read them before attempting this.

Description : Do screened patio enclosures keep out snakes?

Last Answer : Yes, a screened patio will be enclosed on all sides. Thus, the only way a snake will enter is if you open any entrances while entering/exiting. So, be aware of unwanted visitors!

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : State types of enclosures of electric drives.

Last Answer : Types of enclosures of Electric Drives: 1) Screen protected 2) Open type 3) Protected type 4) Totally enclosed 5) Drip-proof type 6) Pipe ventilated type 7) Flame proof type 8) Explosion proof 9) Splash proof.

Description : Enlist any four types of enclosures with their applications. 

Last Answer : Types of enclosures & their Applications: i) Open type enclosure:- It is used where motor is installed in clean atmosphere and in closed room.  ii) Screen Protected enclosure:-( ... is circulated through pipe forcefully for cooling of motors and hot air is taken out through pipe.  

Description : Let a pair of fair coins be tossed. Here S = {HH, HT, TH, TT}. Consider the events A = {heads on the first coin} = {HH, HT}, -Maths 9th

Last Answer : ThenP (A) = P (B) = P (C) = \(rac{2}{4}\) = \(rac{1}{2}\) andP (A ∩ B) = P ({HH}) = \(rac{1}{4}\), P (A ∩ C) = P ({HT}) = \(rac{1}{4}\)P ( ... C)Thus condition (i) is satisfied, i.e., the events are pairwise independent. But condition (ii) is not satisfied and so the three events are not independent

Description : What is the full form of 'HT' ? -How To ?

Last Answer : The full form of 'HT' is High Tension

Description : Hostgator exclusive offer that delivers some of the best shared hosting features we've seen for a very slew of freebies like domain names, SSLits a bit cheaper then Ht tps://yazing.co m/deals/hostgator/getthemoney(take spaces out and click)?

Last Answer : يجعل HostGator استضافة الويب غير المحدودة سهلة وبأسعار معقولة مع مساحة قرص غير محدودة وعرض النطاق الترددي ولوحة تحكم سهلة. تجعل الأسعار المنخفضة والإعداد السهل HostGator واحدة من شركات استضافة الويب الرائدة في الصناعة!2u.pw/L1LzC

Description : What is the fuse rating in HT side of 11.4kv500kva transformer?

Last Answer : You need to specify the phase. I assume it is 3 phase system.Then the HT current is 30.3 amps

Description : The 5-HT antagonist that has antihypertensive property is (a) Methysergide (b) Cyproheptadine (c) Ketanserin (d) Ondansetron

Last Answer : Ans: C

Description : The smooth muscle stimulating action of 5-HT is most marked in the (a) Bronchi (b) Intestines (c) Ureter (d) Billary tract

Last Answer : Ans: B

Description : The following are neurotransmitters in the autonomic ganglia: a. GABA b. noradrenaline c. acetylcholine d. 5 HT

Last Answer : acetylcholine

Description : The following are neurotransmitters at the autonomic post-ganglionic nerve endings: a. GABA b. noradrenaline c. acetylcholine d. 5 HT

Last Answer : acetylcholine

Description : Government formed committee to probe illegal cultivation of HT cotton in . a. Gujarat b. Telangana c. Andhra Pradesh d. Maharashtra e. All of these

Last Answer : e. All of these

Description : Efficiency of power transmission (η) through a circular pipe is given by (ht - hf )/ht , which has a maximum value of __________ percent. (A) 33:3 (B) 50 (C) 66.6 (D) 88.8

Last Answer : (C) 66.6

Description : Effectiveness factor (E) of a catalyst pellet is defined as, E = (actual rate within pore of the catalyst)/(rate if not snowed by pore diffusion), Effectiveness factor for a first order reaction is given by (where, T = Thiele modulus) (A) tan hT/T (B) tan T/T (C) tan hT/tan T (D) None of these

Last Answer : (A) tan hT/T

Description : Venlafaxine differs from standard tricyclic antidepressants in that it: A. Does not inhibit 5-HT reuptake B. Does not inhibit noradrenaline reuptake C. Does not have anticholinergic or antiadrenergic property D. Has lower antidepressant efficacy

Last Answer : C. Does not have anticholinergic or antiadrenergic property

Description : The following antidepressant increases rather than inhibits 5-HT uptake into neurones: A. Clomipramine B. Fluoxetine C. Tianeptine D. Trazodone

Last Answer : C. Tianeptine

Description : Adaptive changes in brain monoamine turnover due to blockade of noradrenaline/5-HT reuptake is credited with the following effect: A. Antipsychotic B. Antianxiety C. Antiparkinsonian D. Antidepressant

Last Answer : D. Antidepressant

Description : The following H1 antihistaminic has additional anti 5-HT, anticholinergic, sedative and appetite stimulating properties: A. Promethazine B. Terfenadine C. Cyproheptadine D. Hydroxyzine

Last Answer : C. Cyproheptadine

Description : The ‘amine’ ergot alkaloid differs from ‘amino acid’ ergot alkaloid in that it has: A. High oral bioavailability B. Better CNS penetrability C. Weaker oxytocic action D. Strong anti-5-HT action

Last Answer : A. High oral bioavailability

Description : 5-HT appears to play a role in the following except: A. Regulation of normal BP B. Regulation of intestinal peristalsis C. Haemostasis D. Causation of migraine

Last Answer : A. Regulation of normal BP

Description : The smooth muscle stimulating action of 5-HT is most marked in the: A. Bronchi B. Intestines C. Ureter D. Biliary tract

Last Answer : B. Intestines

Description : The following is a selective 5-HT1D receptor agonist: A. Buspirone B. Ondansetron C. Sumatriptan D. α-methyl 5-HT

Last Answer : C. Sumatriptan

Description : The following 5-HT receptor is not a G protein coupled receptor: A. 5-HT1 B. 5-HT2 C. 5-HT3 D. 5-HT4

Last Answer : C. 5-HT3

Description : The typical response to intravenous injection of 5-HT in an anaesthetised animal is: A. Rise in BP B. Fall in BP C. Rise followed by brief fall in BP D. Transient fall, followed by brief rise, followed by prolonged fall in BP

Last Answer : D. Transient fall, followed by brief rise, followed by prolonged fall in BP

Description : The following H1 antihistaminic has additional anti 5-HT, anticholinergic, sedative and appetite stimulating properties: A. Promethazine B. Terfenadine C. Cyproheptadine D. Hydroxyzine

Last Answer : C. Cyproheptadine

Description : Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Last Answer : Answer: B

Description : As shown in the illustration, the electrical symbol is used to indicate which of the listed types of motors? EL-0054 A. Shunt motor. B. Series motor. C. Compound motor. D. Tri-field motor.

Last Answer : Answer: C

Description : An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. offer infinite speed variation D. all of the above

Last Answer : Answer: C

Description : Which of the listed motors will operate at the highest RPM, assuming that each operates at the same frequency? A. A four-pole synchronous motor under normal load. B. A four-pole induction motor under ... A six-pole synchronous motor under normal load. D. A six-pole induction motor under full load.

Last Answer : Answer: A

Description : Which of the following is a characteristic of fractional horsepower repulsion start motors? A. They start with a rotating stator field. B. The short circuiting ring is removed from the commutator while ... brushes are removed from the commutator while starting. D. They have a low starting torque.

Last Answer : Answer: B

Description : Universal motors will operate on AC or DC current, and are generally found in _____________. A. portable tools B. large pump motors C. turbo electric main motors D. forced draft fans

Last Answer : Answer: A

Description : Electric motors intended for use outside the engine room and boiler room are frequently rated to run at a designed ambient temperature of 40°C. What is the equivalent temperature in degrees Fahrenheit? A. 54.2°F B. 72.0°F C. 104.0°F D. 129.6°F

Last Answer : Answer: C

Description : Electrical failures in motors are caused by the breakdown of insulation, which may be caused by _____________. A. penetration of moisture B. accumulation of dirt C. overheating D. all of the above

Last Answer : Answer: D

Description : The armature cores of the D.C. motors are constructed with laminations to ___________. A. eliminate hysteresis B. minimize brush sparking C. reduce eddy current losses D. compensate for armature reaction

Last Answer : Answer: C

Description : The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Last Answer : Answer: D

Description : Some large A.C. motors are equipped with with heaters. These could be ___________. I. resistance heaters bolted directly to the frame II. low voltage windings embedded in the motor windings A. I only B. II only C. either I or II D. neither I or II

Last Answer : Answer: C

Description : An overload in which of the listed motors will result in the illumination of an indicating light at the propulsion control station alarm panel? A. Fuel pump motor B. Steering motor C. Condensate pump motor D. Forced draft blower motor

Last Answer : Answer: B

Description : When disassembling electric motors for maintenance or overhaul, ________________. A. punch mark frame and end bells for proper assembly B. wrap bearings in lint free cloths if they are to be reused C. tag and store small parts in a box D. all of the above

Last Answer : Answer: D

Description : In addition to undercutting the mica, proper maintenance of a D.C. motor's commutator includes _______________. A. side-cutting the copper segments and insulating the slots B. coating the copper surface with light machine ... in an oven at a maximum of 95°C for not over 8 hours D. all of the above

Last Answer : Answer: A

Description : If a unloaded shunt motor's field were weakened by rheostat resistance or by an open circuit, the motor would _________. A. overspeed due to reduced CEMF B. stop because of low flux C. continue to run at base speed D. slow down and overheat

Last Answer : Answer: A

Description : All of the following items can be used in the maintenance of a D.C. propulsion motor's commutator EXCEPT _______________. A. a canvas wiper B. safety solvent C. abrasive dressing stones D. sandpaper

Last Answer : Answer: B