Most appropriate instrument for measurement of internal and external

diameter of a tube is

A. vernier callipers

B. micrometer screw gauge

C. meter rule

D. measuring tape

1 Answer

Answer :

vernier callipers

Related questions

Description : What is difference between micrometer and screw gauge?

Last Answer : There is no difference - they're different names for the samedevice.

Description : The main scale of a vernier callipers has n divisions/cm. n divisions of the vernier scale coincide with (n – 1) divisions of main scale.

Last Answer : The main scale of a vernier callipers has n divisions/cm. n divisions of the vernier scale coincide with (n - 1) ... n}\) (D) \(\frac{1}{n^2}\)

Description : What is the name of instrument used for measuring earthquake intensity? a. Modified Mercalli Scale b. Metrological scale c. Vernier scale d. Barometer

Last Answer : a. Modified Mercalli Scale

Description : Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the ... back sights one with the telescope normal and the other with telescope inverted (D) None of these

Last Answer : (C) Taking two back sights one with the telescope normal and the other with telescope inverted

Description : The largest diameter of external or internal screw thread is called (A) Major diameter (B) Minor diameter (C) Pitch diameter (D) None of the above

Last Answer : (A) Major diameter

Description : The best instrument for measuring the velocity of a stream flow is (A) Pitot tube (B) Price's current meter (C) Surface float (D) Sub-surface float

Last Answer : Answer: Option B

Description : The most suitable flow measuring device for the fluid flow measurement in a very large diameter pipeline is a (A) Weir (B) Pitot tube (C) Kennison nozzle (D) V-notch

Last Answer : (B) Pitot tube

Description : Before using an all-purpose electric measuring instrument (multimeter) utilizing internal batteries to supply power for resistance measurements, you should FIRST ____________. A. remove one of the ... batteries C. calibrate using a known external resistance D. select the proper resistance range

Last Answer : Answer: D

Description : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Last Answer : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale ... (C) 0.053 cm (D) 0.529 cm

Description : Air gap readings should be periodicly taken for electrical generation equipment. The best tool to use to take these measurements is a ___________. A. cloth (non-metalic) tape measure B. dial indicator C. inside micrometer D. tapered, long blade, feeler gage

Last Answer : Answer: D

Description : __________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge (C) Pitot tube (D) Orificemeter

Last Answer : (C) Pitot tube

Description : The skin depth is measured in a) Meter b) Millimetre c) Centimetre d) Micrometer

Last Answer : d) Micrometer

Description : Air velocity in ducts can be measured by using and manometer a) Orifice meter b) Borden gauge c) Pitot tube d) Anemometer

Last Answer : Pitot tube

Description : Particles having diameter greater than 75 μm (micrometer = 10 -6 mm) are called (A) Grit (B) Dust (C) Powder (D) Smoke

Last Answer : (A) Grit

Description : Single-mode step-index cable has a core diameter in the range of ∙ A. 100 to 1000 micrometer ∙ B. 50 to 100 micrometer ∙ C. 2 to 15 micrometer ∙ D. 5 to 20 micrometer

Last Answer : . 2 to 15 micrometer

Description : The use of telecommunication for automatic indicating or recording measurement at the distance from the measuring instrument. A. Monitoring B. Tracking C. Telemetry D. Telecommand

Last Answer : C. Telemetry

Description : Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the ... Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Last Answer : (D) All the above

Description : A useful instrument for checking A.C. motor performance by measuring possible unbalanced currents is the _____________. A. hand or battery-operated megger B. vibrating-reed frequency meter C. hook-on voltmeter-ammeter D. D'Arsonval iron-vane probe

Last Answer : Answer: C

Description : When measuring AC current flow, you must always connect the meter _____________. A. in series with the power source and load B. in parallel with the power source and load C. insuring correct polarity D. using the lowest range possible to prevent instrument damage

Last Answer : Answer: A

Description : Which instrument is used for measuring the magnitude of an earthquake- a) Tilit meter b) Richter scale c) Seismograph d) Seismometer

Last Answer : b) Richter scale

Description : A multipurpose instrument for measuring current, potential difference and resistance is a) Ohmmeter b) Astatic galvanometer c) Rheostat d) AVO Meter

Last Answer : d) AVO Meter

Description : Why energy meter is integrating type measuring instrument?

Last Answer : Energy Meter is Integrating Type Measuring Instrument: Energy meter is used for measurement of energy, which is obtained by integration (summation) of power supplied over the particular time duration, hence it the integrating type measuring instrument. 

Description : The instrument for measurement of flow/ velocity is________. A. Bimetallic. C) Turbine meter. B. Manometer. D) Wattmeter

Last Answer : Turbine meter

Description : Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range ... of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Last Answer : Answer: A

Description : Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Last Answer : Answer: Option D

Description : Which of the following instrument can be used for measuring speed of an aeroplane? (A) Venturimeter (B) Orifice plate (C) Pitot tube (D) Rotameter

Last Answer : Answer: Option C

Description : What is the Maxwell Cork-Screw Rule ?

Last Answer : The British physicist James Clark Maxwell in 183 discovered the formula for determining the direction of a magnetic force line with the help of a cork-screw. Turning the cork-screw in the right hand ... will point the direction of the magnetic force line in the direction in which the thumb rotates.

Description : Theodolite is an instrument used for (a) Tightening the capstan-headed nuts of level tube (b) Measurement of horizontal angles only (c) Measurement of vertical angles only (d) Measurement of both horizontal and vertical angles*

Last Answer : (d) Measurement of both horizontal and vertical angles*

Description : What is the pitch of your laboratory screw gauge?

Last Answer : What is the answer ?

Description : What are disadvantages of digital screw gauge?

Last Answer : It will not work if the battery dies.

Description : State the use of following: (i) Screw driver (ii) Nose pliers (iii) Wire gauge (iv) Test lamp 

Last Answer : i) Screw Driver: Usually hand-operated, for turning screws with slotted heads for losing and tightening the screws.  ii) Nose pliers : To hold and tight the wires   iii) Wire Gauge: To ... supply voltage, Verification of voltage & current in the system and also check the open circuit fault. 

Description : A tunable RF instrument, which, by means of a sharp dip of an indicating meter, indicates resonance with an external circuit under test

Last Answer : dip meter

Description : Correction for capillary effect in manometers (used for pressure measurement) need not be applied, if diameter of the manometer tube is __________ mm. (A) < 4 (B) > 4 (C) > 12.5 (D) < 10

Last Answer : (C) > 12.5

Description : What pressure measuring device consists of a coiled hollow tube that tends to straighten out when the tube is subjected to an internal pressure?  A. Aneroid  B. Manometer  C. Bourdon pressure gage  D. Barometer

Last Answer : Bourdon pressure gage

Description : Who uses a screw and an insulting tape beginning with e?

Last Answer : Feel Free to Answer

Description : If a vernier spot coincides with a spot on the main scale or is closest to the spot, what is that spot called ?

Last Answer : If a vernier spot coincides with a spot on the main scale or is closest to the spot, then that spot is called vernier alignment.

Description : What is Vernier Compatibility ?

Last Answer : If a vernier spot coincides with a spot on the main scale or is closest to the spot, then that spot is called vernier alignment.

Description : Who Discovered the Vernier Scale ?

Last Answer : Pierre Vernier discovers the Vernier scale.

Description : What is the name of the instrument for measuring air pressure ?

Last Answer : Barometer is the name given to an instrument for measuring air pressure.

Description : Ondometer is a - (1) Measuring instrument for distance covered by motor wheels (2) Measuring instrument for frequency of electromagnetic waves (3) Device for measuring sound intensity (4) Measuring instrument for electric power

Last Answer : (2) Measuring instrument for frequency of electromagnetic waves

Description : Instrument for measuring wind velocity is called – (1) Coulombmeter (2) Anemometer (3) Cyanometer (4) Chronometer

Last Answer : (2) Anemometer Explanation: An anemometer is an instrument that measures wind speed and wind pressure. Anemometers are important tools for meteorologists, who study weather patterns. The term is derived from the Greek word anemos, which means wind.

Description : The instrument for measuring intensity of earthquakes is called – (1) Ediograph (2) Pantagraph (3) Ergograph (4) Seismograph

Last Answer : (4) Seismograph Explanation: Seismometers are instrument that measures motion of the ground, including those of seismic waves generated by earthquakes, volcanic eruptions and other seismic sources. ... of these different sources. Seismograph is another Greek term meaning to draw siesmo waves.

Description : The first instrument used for measuring temperature was the gas thermoscope invented by: w) Celsius x) Galileo y) Centigrade z) Fahrenheit

Last Answer : ANSWER: X -- GALILEO

Description : The instrument for measuring intensity of earthquakes is called (1) Ediograph(2) Pantagraph (3) Ergograph(4) Seismograph

Last Answer : Seismograph

Description : Which of the following actions would be an appropriate response by companies to improve the public's perception of their financial reporting? a. Requiring internal auditors to report all significant ... external and internal auditing work separated to maintain independence. d. None of the above.

Last Answer : Increased adoption of audit committees.

Description : Which of the following correctly explains the phenomenon of "Test Tube Bally"? (1) When every process of embryo formation is in the test tube. (2) When the embryo develops in a test tube ... is external and development is internal. (4) When the fertilisation is internal and development is external.

Last Answer : (3) When the fertilisation is external and development is internal. Explanation: Test tube baby is born from in vitro fertilization. In vitro fertilization (IVF) is a process by which an egg ... ) is then transferred to the patient's uterus with the intention of establishing a successful pregnancy.

Description : Which of the following correctly explains the phenomenon of Test Tube Baby ? (1) When every process of embryo formation is in the test tube. (2) When the embryo develops in a test ... is external and development is internal. (4) When the fertilisation is internal and development is external.

Last Answer : When the fertilisation is external and development is internal.

Description : An instrument commonly used for the measurement of atmospheric pressure is known as A. Manometer B. Barometer C. Calorimeter D. Potentiometer

Last Answer :  Barometer

Description : The polar moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter of 6 cm will be a.137.5 cm4 b.107 dynes c.275 cm4 d.550 cm4 e.1100 cm4

Last Answer : c. 275 cm4