what is the difference between four point starter and three point starter?

what is the difference between four point starter and three point starter?
by

2 Answers

Answer :

The only difference is in the NO VOLT COIL connection in the starter, in three point starter NVC is connected to the field whereas in four point starter it is connected separately. The advantage of using 4 point starter is that it can work well in field controlled motor as well.

If we try to perform field control of DC shunt motor using a 3 point starter, the field current might get very low(for above rated speed) and lead to DEENERGISE the NVC leading to turning off of the motor.
by

Answer :

The shunt connection in four point starter is provided separately form the line where as in three point starter it is connected with line which is the drawback in three point starter.
by

Related questions

Three point starter can be used for?

Last Answer : Three point starter can be used for both shunt and compound motor.

A three point starter is considered suitable for?

Last Answer : A three point starter is considered suitable for shunt as well as compound motors.

State any four advantages of soft starter.

Description : State any four advantages of soft starter.

Last Answer : Advantages of soft starter: 1. Very low line voltage drops on motor operation 2. Reduced energy losses in the lines 3. System efficiency increases 4. Very smooth starting & operation 5. As ... may lead to lower MD billing. 13. Less mechanical maintenance. 14. Saving in operating costs.

Draw the wiring diagram of fluorescent tube. Explain the working of choke and starter.

Description : Draw the wiring diagram of fluorescent tube. Explain the working of choke and starter. 

Last Answer : Fluorescent lamp:- Operation:- When switch is ON current flows through the choke-filament no1- starter-filament no. 2- to neutral, At that time choke induces high voltage which is applied to ... at the time of starting. ii) Starter: To make and break the circuit to start the tube. 

Which type of starter is used to start the DC motor?

Description : Which type of starter is used to start the DC motor?

Why starter is required for starting an induction motor?

Description : Why starter is required for starting an induction motor?

How to Replace a Starter

Description : How to Replace a Starter

Last Answer : How to Replace a Starter The starter is where it all begins. Your car is just sitting there and ready to go, but it won't. A charge is supposed to be sent to the starter and then ... the battery and tighten the connection. Start the engine to make sure that all connections have been made properly.

Explain the necessity of starter for D.C. motor. State various types of D.C. motor starter.

Description : Explain the necessity of starter for D.C. motor. State various types of D.C. motor starter. 

Last Answer : Necessity of Starter for D.C. Motor: Armature current is given by equation Ia = (V−Eb)/Ra i) If the motor is at standstill or rest, back emf Eb is zero (as Eb= ZNP/(60A), at start speed N ... . Types of D.C. motor starters: i) Two point starter ii)Three point starter iii) Four point starter

State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Description : State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Last Answer : i) Function of Starter:- 1. To prevent the high starting current OR to minimize the starting current. 2. To give supply failure protection 3. To give over load and short circuit protection ... an installation and cut off the circuit from power supply and avoid electrical shock to the person.

In a manual shunt motor starter?

Last Answer : In a manual shunt motor starter over load relay is connected in series and no volt relay in parallel with the load.

A direct online starter is used for starting motors?

Last Answer : A direct online starter is used for starting motors up to 5 H.P.

For starting a D.C. motor a starter is required because?

Last Answer : For starting a D.C. motor a starter is required because it limits the starting current to a safe value.

What is an auto transformer starter?

Description : What is an auto transformer starter?

What is the best Arduino starter kit?

Description : What is the best Arduino starter kit?

State any Four lE Rules regarding electric safety.

Description : State any Four lE Rules regarding electric safety. 

Last Answer :  lE Rules regarding electric safety: 1. IE Rule 3 : Authorization 2. IE Rule 29 : Construction and maintenance of electrical supply line and apparatus 3. IE Rule 30: Service line and apparatus on ... 26. IE Rule 60: Test for resistance of insulation 27. IE Rule 61: Connection with earth 

State any four advantages of LC filter.

Description : State any four advantages of LC filter.

Last Answer : 1. The choke input (LC) filter has a high output D.C voltage. 2. It has no loading effect on the rectifier and power transformer.  3. The diode does not have to carry surge currents.  ... effect on the rectifier and power transformer.  7. It has better voltage regulation than that of π filter.

A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Description : A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Last Answer : The current is 10.0A.  1ampere = 1 Coulomb per 1 second.  0.1Coulombs ÷ 0.01seconds = 10.0amperes.

How to Find a Four Leaf Clover

Description : How to Find a Four Leaf Clover

Last Answer : How to Find a Four Leaf Clover A four leaf clover is associated with good luck, particularly because it is rare and hard to find. A clover with four leaves is actually considered a genetic defect, ... it! You can learn more about preserving plants and flowers in this article: How to Dry Flowers.

Explain any four properties of Moulding sand.

Description : Explain any four properties of Moulding sand. 

Last Answer : 1. Porosity: Molten metal always contain a certain amount of dissolved gases, which are evolved when the metal freezes the molten metal coming in contact with the moist sand , generates steam or ... to the casting. Refractoriness is measured by the sinter point of the sand rather than its melting

List any four casting defects.

Description : List any four casting defects.

Last Answer : The various types of casting defects are as follows: 1. Gas Porosity: Blowholes, open holes, pinholes. 2. Shrinkage defects: shrinkage cavity. 3. Mold material defects: Cut and washes, ... Pouring metal defects: Cold shut, misrun, slag inclusion. Metallurgical defects: Hot tears, hot spot.

List any four materials used for pattern making

Description : List any four materials used for pattern making

Last Answer : The various types of materials used are as follows: 1. Wood 2. Metal. 3. Plastic. 4. Plaster. 5. Wax.

List any four accessories used on lathe.

Description : List any four accessories used on lathe.

Last Answer : The various accessories used in lathe are as follows. 1) Lathe centers 2) Carriers or driving dog 3) catch plates 4) Chucks 5) Face plates 6) Angle plates 7) Mandrels 8) Rests

A four -quadrant operation requires two full converters connected in

Description : A four -quadrant operation requires two full converters connected in  (1) Series (3) Back to back (2) Parallel (4) Series Cascade

Last Answer : A four-quadrant operation requires two full converters connected in Parallel 

What are the four basic welding positions?

Description : What are the four basic welding positions?

Describe the basic SHA operation with the help of its four mode specifications.

Description : Describe the basic SHA operation with the help of its four mode specifications.

Last Answer : Sample-and-hold amplifier (SHA) is a unity gain amplifier with a mode control switch where the input of the amplifier is connected to a time-varying signal. A trigger pulse at the mode control switch ... but other forms, such as optical and mechanical forms, are possible. Also denoted S/H.

Four Quadrant Operation Of DC Motor

Description : Four Quadrant Operation Of DC Motor

Single point Cutting tool signature

Description : Single point Cutting tool signature

Last Answer : The shape of a tool is specified in a special sequence and this special sequence is called tool signature. The tool signature is given below (i) Back rake angle (ii) Side rake angle (iii) ... rake, end relief, side relief, end cutting edge, side cutting edge angle and 0.8 mm nose radius.

Illustrate with neat wiring diagram a single lamp control by two point method.

Description : Illustrate with neat wiring diagram a single lamp control by two point method.

Last Answer : Single lamp control by two point method:  This system is commonly used for stair case wiring. It consists of two way switches (the switch operates always in one of the two possible positions) the ... the person will change the position of switch S2, so that the lamp will be switched OFF'.

The operating point of a protective current transformer is near the

Description : The operating point of a protective current transformer is near the

Last Answer : The operating point of a protective current transformer is near the Ankle point

Blind spot is a point in the zones of protection where

Description : Blind spot is a point in the zones of protection where

Last Answer : Blind spot is a point in the zones of protection where No protection is available.

If the % reactance upto the fault point is 20%, then the short circuit current will be

Description : If the % reactance upto the fault point is 20%, then the short circuit current will be

Last Answer : If the % reactance upto the fault point is 20%, then the short circuit current will be 5 times the full load current

In a load curve the highest point represents?

Last Answer : In a load curve the highest point represents peak demand.

State any four advantages of three phase induction motor.

Description : State any four advantages of three phase induction motor. 

Last Answer : Advantages of three phase induction motor https://youtu.be/27OIOCKN05U

State any four application of three phase circuit.

Description : State any four applications of three phase circuits.

Last Answer : The application of three phase circuits are 1. Three phase circuit is used for power transmission over long distances. 2. Three phase circuit can produce rotating magnetic field 3. Three phase ... three phase Motors and Transformers. 4. Three phase circuit is used for power converters circuits.

Why is a capacitor used in a single phase motor and not in three phase motor ?

Description : Why is a capacitor used in a single phase motor and not in three phase motor ?

Last Answer : In 1-phase induction motor capacitor work is generate the auxiliary winding current than excite the main winding to rotor starts rotate. After rotor start rotating about 75% of their speed than auxiliary ... emf to start the motor.so,in 3-phase induction motor is self start induction motor.

Why is a three phase denoted by R, Y, B ?

Description : Why is a three phase denoted by R, Y, B ?

Last Answer : phase 1 ,R =Red colour cable terminal, phase 2 Y=Yellow colour terminal cable,Phase 3 B=Blue colour cable terminal, N =Neutral. For identification.

List three important characteristics of an electric circuit.

Description : List three important characteristics of an electric circuit.

Define balanced and unbalanced load in three phase circuit.

Description : Define balanced and unbalanced load in three phase circuit.

Last Answer : Balanced Load: When all the imedances of 3 phases are equal in magnitude and of same nature then load is said to be balanced.  Unbalanced Load: When all the imedances of 3 phases are not equal in magnitude and of different nature then load is said to be unbalanced.

Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch

Description : Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch currents I1 : I2 : I3 if the branch resistances are in the ratio of 2 : 3 : 4 respectively? A) 2 : 3 : 4 B) 6 : 4 : 3 C) 4 : 3 : 2 D) None of these

Last Answer : Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch currents I1 : I2 : I3 if the branch resistances are in the ratio of 2 : 3 : 4 respectively? A) 2 : 3 : 4 B) 6 : 4 : 3 C) 4 : 3 : 2 D) None of these

When three resistors with unequal values are connected in parallel, _______

Description : When three resistors with unequal values are connected in parallel, _______ A) The current across the resistors is the same  B) The voltage drop across the resistors is the same C) The voltage drops across the resistors is proportional to the resistance of each resistor D) None of these

Last Answer : When three resistors with unequal values are connected in parallel, The voltage drop across the resistors is the same