If core diameter of bolt is 13.8cm the it’s nominal diameter is given by?

a) 17.27mm

b) 15.34mm

c) 14.67mm

d) 16.34mm

1 Answer

Answer :

a) 17.27mm

Related questions

Description : If 8 bolts are emplaced in a clamp coupling with shaft diameter 80mm d, calculate the diameter of each bolt if coefficient of friction is 0.3 and torque transmitted is 4000N-m. Permissible tensile stress is 80N/mm2. a) 27mm b) 25mm c) 23mm d) 21mm

Last Answer : a) 27mm

Description : If number of coils are 8 and wire diameter of spring 3mm, then solid length is given by? a) None of the listed b) 27mm c) 24mm d) 21mm

Last Answer : c) 24mm

Description : The shock absorbing capacity of a bolt can be increased by (A) Increasing shank diameter (B) Making shank diameter equal to core diameter of threads (C) Using castle nut in place of ordinary hexagonal nut (D) Using a washer

Last Answer : (B) Making shank diameter equal to core diameter of threads

Description : The shock absorbing capacity of a bolt can be increased by (A) Increasing stress in shank (B) Increasing stress in core diameter of threads (C) Decreasing stress in shank (D) Decreasing stress in core diameter of threads

Last Answer : (A) Increasing stress in shank

Description : Nominal diameter of the screw thread is the same as core diameter. a) True b) False

Last Answer : b) False

Description : The shock absorbing capacity of bolts can be increased by a) Increasing the shank diameter b) Decreasing the length of shank portion of bolt c) Increase the shank diameter and decreasing the length of shank d) None of the listed

Last Answer : d) None of the listed

Description : The shock absorbing capacity of bolt can be increased by making the shank diameter ________ the root diameter. a) Lesser than b) Equal to c) Greater than d) No effect

Last Answer : b) Equal to

Description : If 8 bolts are emplaced in a clamp coupling with shaft diameter 80mm d, calculate the tensile force on each bolt if coefficient of friction is 0.3 and torque transmitted is 4000N-m. a) 51234.4N b) 45968.3N c) 41666.7N d) None of the listed

Last Answer : c) 41666.7N

Description : Let A and B be two fuzzy integers defined as: A={(1,0.3), (2,0.6), (3,1), (4,0.7), (5,0.2)} B={(10,0.5), (11,1), (12,0.5)} Using fuzzy arithmetic operation given by (A) {(11,0.8), (13,1), (15,1)} ( ... ,0.2)} (D) {(11,0.3), (12,0.5), (13,0.6), (14,1), (15,0.7), (16,0.5), (17,0.2)}

Last Answer : (D) {(11,0.3), (12,0.5), (13,0.6), (14,1), (15,0.7), (16,0.5), (17,0.2)}

Description : What is the approximate nominal diameter for coarse threads? a. d = 1.136 dc b. d = 1.59 dc c. d = 1.19 dc d. d = 0.5 dc

Last Answer : c. d = 1.19 dc

Description : When the term "nominal size" is used to describe a component under ASME B16.5, what does this indicate? a) A dimension. b) A size designation. c) The inside diameter. d) The flange bolt circle.

Last Answer : b) A size designation.

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Description : the range of the data 13, 18, 20, 15, 12, 17, 9, 14, 11, and 16 is ________.

Last Answer : the range of the data 13, 18, 20, 15, 12, 17, 9, 14, 11, and 16 is ________.

Description : The provisions of reservation for OBC is made in the Constitution under which Articles? (1) Article 13 (ll) and 14 (2) Article 14 and 15 (3) Article 15 (IV) and 16 (IV) (4) Article 17 and 18

Last Answer : (3) Article 15 (IV) and 16 (IV) Explanation: Under Article 15 (IV) and 16 (IV), the provision of reservation for OBC is made in the constitution.

Description : In the Indian Constitution, the right to equality is granted by following Articles. They are: (1) Article 16 to Article 20 (2) Article 15 to Article 19 (3) Article 14 to Article 18 (4) Article 13 to Article 17

Last Answer : (3) Article 14 to Article 18 Explanation: Article 14 - Equality before Law Article 15 - Prohibition of Discrimination Article 16 - Equality of Opportunity Article 17 - Abolition of untouchability Article 18 - Abolition of titles.

Description : 3 ? 113 673 3361 13441 40321 a) 13 b) 14 c) 15 d) 16 e) 17

Last Answer : The series is: 3 × 8 – 7 = 17; 17 × 7 – 6 = 113; 113 × 6 – 5 = 673; 673 × 5 – 4 = 3361; 3361 × 4 – 3 = 13441; 13441 × 3 – 2 = 40321 Answer: e)

Description : 24 14 26 ? 28 16 30 a) 13 b) 17 c) 15 d) 11 e) 20

Last Answer : The series consists of two series 1 and 2: Series 1 : 24 26 28 30 +2 +2 +2 Series 2 : 14 15 16 +1 +1 Answer: c)

Description : Compute the value of adding the following two fuzzy integers: A = {(0.3,1), (0.6,2), (1,3), (0.7,4), (0.2,5)} B = {(0.5,11), (1,12), (0.5,13)} Where fuzzy addition is defined as μA+B(z) = maxx+y=z (min(μA(x), μB( ... ,18)} (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)}

Last Answer : (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)} 

Description : kajal rides his scooter 14km at an average speed of 16 km/hr and again travels 16km at an average speed of 14 km/hr. What is her average speed for the entire trip approximately? a) 15.36 km/hr b) 17.46 km/hr c) 13.56 km/hr d) 14.86 km/hr

Last Answer : D Total distance travelled =14+16=30Km Time taken to travel 14 km at an average speed of 16 km/hr =14/16=7/8 Hr Time taken to travel 16 km at an average speed of 14 km/hr =16/14=8/7 hr Total time taken = ... /Total time taken =30/(7/8+8/7) =30/(113/56) =30*56/113=1680/113 =14.86 km/hr

Description : The mean of 8 article was found to be 15. On rechecking, it was found that two article were wrongly taken as 11 and 9 instead of 16 and 14 respectively. Find the correct mean. A) 17.25 B) 13.65 C) 16.54 D) 16.25

Last Answer : D) Calculated mean of 8 articles = 15 Incorrect sum of these 8 articles = (15*8) = 120. Correct sum of these 8 articles = (incorrect sum) - (sum of incorrect articles) + (sum of actual articles) = [120 ... (30)] = 130 Therefore, correct mean = 130/8 = 16.25 Hence, the correct mean is 16.25.

Description : What is the size of the longest pencil that can fit in a box with dimensions 12 cm× 10 cm× 8cm? a) 15 b) 15.5 c) 17 d) 17.5 e) 18

Last Answer : Answer: d)

Description : The designation M 36 × 2 means (A) Metric fine threads of 36 mm outside diameter and 2 mm pitch (B) Metric coarse threads of 36 mm outside diameter and 2 mm pitch (C) Metric threads of 36 mm pitch diameter and 2 mm pitch (D) Metric threads of 36 mm core diameter and 2 mm pitch

Last Answer : (A) Metric fine threads of 36 mm outside diameter and 2 mm pitch

Description : Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Last Answer : b. Set screws

Description : The shear plane in case of bolts should (a) be across threaded portion of shank (b) be parallel to axis of bolt (c) be normal to threaded portion of shank (d) never be across the threaded portion (e) none of the above.

Last Answer : (d) never be across the threaded portion

Description : Shank is the portion of bolt between the head and the thread. a) True b) False

Last Answer : a) True

Description : Which of the following is not a function of washer? a) Distributes load over a large area of clamped parts b) Provides bearing surface over large clearance bolts c) Prevents marring of the bolt head and nut surface d) Helps in locking of the fastener

Last Answer : d) Helps in locking of the fastener

Description : In nut and bolt fastener, nut is generally held stationary while bolt is rotated. a) True b) False

Last Answer : b) False

Description : If a fastener is threaded into a tapped hole, then the fastener is likely to be called as a) Screw b) Bolt c) Washer d) Screw or bolt

Last Answer : a) Screw

Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface

Description : When a nut is tightened by placing a washer below it, the threads of bolt are subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (A) Direct shear stress

Description : When the shear strength of nut is equal to the tensile strength of bolt, the height of nut (h) should be (A) h = 0.5 dc (B) h = 0.25 dc (C) h = 0.75 dc (D) h = dc

Last Answer : (A) h = 0.5 dc

Description : The connecting rod bolts are tightened up with the initial tension greater than external load so that (A) Failure of bolt will be static (B) The resultant load on bolt will not be affected by ... ) The bolt will not fail by fatigue although the external load is fluctuating (D) All the three

Last Answer : (D) All the three

Description : When the shear strength of nut is half the tensile strength of bolt, the height of nut (h) should be (A) h = 0.5 dc (B) h = 0.25 dc (C) h = 0.75 dc (D) h = dc

Last Answer : (B) h = 0.25 dc

Description : The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Last Answer : (D) All three factors

Description : When a nut is tightened by placing a washer below it, the shank of bolt is subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (C) Tensile stress

Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut

Description : The mode of given data 15, 14, 19, 20, 14, 15, 16, 14, 15, 18, 14, 19, 15,17 and 15 is -Maths 9th

Last Answer : We first arrange the given data in ascending order as follows 14, 14, 14, 14, 15, 15, 15, 15, 15, 16, 17, 18, 19, 19, 20 From above, we see that 15 occurs most frequently i.e., 5 times. Hence, the mode of the given data is 15.

Description : The mode of given data 15, 14, 19, 20, 14, 15, 16, 14, 15, 18, 14, 19, 15,17 and 15 is -Maths 9th

Last Answer : (b) We first arrange the given data in ascending order as follows 14, 14, 14, 14, 15, 15, 15, 15, 15, 16, 17, 18, 19, 19, 20 From above, we see that 15 occurs most frequently i.e., 5 times. Hence, the mode of the given data is 15.

Description : How much pubic hair should I have as a 16 year old male almost 17. I started puberty when I was 13 or 14. I have penis hair that is spreading to my upper thighs and spreads to my butt and ball hair. Is that good amount of hair at my age and when started.?

Last Answer : I don’t understand the question

Description : All active prostaglandins have at least one double bond between positions (A) 7 and 8 (B) 10 and 11 (C) 13 and 14 (D) 16 and 17

Last Answer : Answer : A

Description : Small and large size of greeting post rate is a) 14/- per card incl of INR 5/- postage, 17/- per card inclusive of INR 5/- postage. a) 12/- per card incl of INR 5/- postage, 16/- per card inclusive ... 5/- postage a) 10/- per card incl of INR 5/- postage, 12/- per card inclusive of INR 5/- postage

Last Answer : a) 14/- per card incl of INR 5/- postage, 17/- per card inclusive of INR 5/- postage.

Description : Menarche usually occurs at age of: a) 8 and 10 years. b) 11 and 13 years. c) 14 and 16 years. d) 17 and 18 years. e) 18 and above.

Last Answer : b) 11 and 13 years.

Description : Stress Concentration Factor is the ratio of nominal stress obtained by elementary equations for minimum cross- section and highest value of actual stress near discontinuity. a) True b) False

Last Answer : b) False

Description : The maximum longitudinal pitch in bolted joints, subjected to tensile forces, wherein t = thickness of the plate and D = diameter of bolt, is (a) 32 D (b) 16 D (c) 32 t (d) 16 t

Last Answer : (d) 16 t

Description : What is the length of the 3rd side of a triangle having sides of 17.1cm and 28.8cm whose opposite angles add up to 72 degrees?

Last Answer : The largest angle then is 108 degrees that is opposite the 3rdside which is the longest side and by using the cosine rule intrigonometry it is 37.77cm in length rounded to two decimalplaces

Description : Ten observations 6, 14, 15, 17, x + 1, 2x – 13, 30, 32, 34, 43 are written in ascending order. -Maths 9th

Last Answer : Here, the arranged data is 6, 14, 15, 17, x + 1, 2x - 13, 30, 32, 34, 43 Total number of observations = 10 Here, 10 is an even number , therefore median will be the mean of (10 / 2)th and (10 / 2 + 1)th observation. ... ⇒ 3x + 12 / 2 = 24 ⇒ 3x - 12 = 48 ⇒ 3x = 60 ⇒ x = 20 ∴ The value of x = 20

Description : Ten observations 6, 14, 15, 17, x + 1, 2x – 13, 30, 32, 34, 43 are written in ascending order. -Maths 9th

Last Answer : Here, the arranged data is 6, 14, 15, 17, x + 1, 2x - 13, 30, 32, 34, 43 Total number of observations = 10 Here, 10 is an even number , therefore median will be the mean of (10 / 2)th and (10 / 2 + 1)th observation. ... ⇒ 3x + 12 / 2 = 24 ⇒ 3x - 12 = 48 ⇒ 3x = 60 ⇒ x = 20 ∴ The value of x = 20

Description : Ten observations 6, 14, 15, 17, x+1, 2x -13, -Maths 9th

Last Answer : 6, 14, 15, 17, x + 1, 2x -13, 30, 32, 34, 43, Here, n = 10 Since the number of observations is 10 (an even number), therefore, the median = (10/2)th observation + (10/2 + 1)th observation/2 = 5th observation + 6th ... = x + 1 + 2x - 13/2 ⇒ 48 = 3x - 12 ⇒ 3x = 48 + 12 = 60 ⇒ x = 20

Description : Which of the following Article of Indian Constitution deals with the Right to Equality before Law? (1) Article – 13 (2) Article - 14 (3) Article – 15 (4) Article - 17

Last Answer : (2) Article - 14 Explanation: Right to equality is given under article 14 of Indian constitution. It ensures that every citizen shall be like-wise protected by the laws of the country. It means that ... Indian citizens on the basis of their gender, caste, creed, religion or even the place of birth.