Description : Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False
Last Answer : b) False
Description : Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False
Description : A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these
Last Answer : A. Co-axial
Description : Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False
Last Answer : a) True
Description : The real application of knuckle joint is used to connect three rods - two with forks and a third with the eye. A. True B. False
Last Answer : A. True
Description : Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False
Description : Cotter joints is used for transforming rotating torque. A. True B. False
Last Answer : B. False
Description : Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False
Description : Cotter joint is a permanent fastening. a) true b) false
Last Answer : b) false
Description : Cotter joint is connected to parallel roads . A. True B. False
Description : The principle of wedge action is used in cotter joint. a) True b) False
Description : Knuckle Joint can’t be used to connect two intersecting rods. a) Yes b) No, it can’t be used c) It can be used with some modificatios d) It is expensive and hence isn’t used
Last Answer : b) No, it can’t be used
Description : A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False
Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing
Last Answer : A. Cotter joints
Description : Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above
Last Answer : c) Axial tensile or compressive
Description : Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar
Last Answer : d) Collar
Description : The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Last Answer : B. Knuckle joint
Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing
Description : Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar
Description : Cotter joint is used when the members are subjected to which type of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the mentioned
Description : Axle is frequently used in torque transmission. a) True b) False
Description : Entire torque is transmitted by friction in the clamp coupling. a) True b) False
Description : Saddle key is transmit power or torque through friction resistant only A. True B. False
Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined
Last Answer : A. Co - axial
Description : The taper on cotter and slot is fomed on both the location is agreed or not.. a) agree b) disagree
Last Answer : b) disagree
Description : Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load
Last Answer : C. Axial tensile or compressive load
Description : Taper on Cotter is varies from A. 1 in 15 to 1 in 12 B. 1 in 20 to 1 in 15 C. 1 in 25 to 1 in 20 D. 1 in 48 to 1 in 24
Last Answer : D. 1 in 48 to 1 in 24
Description : The draw of cotter should not be more than the........ A. 3 mm B. 4 mm C. 5 mm D. 6 mm
Last Answer : A. 3 mm
Description : Taper is made cotter and slot on both the side. A. Yes B. No
Last Answer : B. No
Description : The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False
Description : A but joint can be defined as a joint between two components lying approximately in a different plane. a) True b) False
Description : The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False
Description : A knuckle joint is also called socket pin joint. a) True b) False
Description : What was the two purpose of providing clearance in cotter joint?
Last Answer : Feel Free to Answer
Description : The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple ... Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above
Last Answer : A. Two roads whose Axes are coincide or intersecting and lies in single plane.
Description : Oldham coupling i used to connect two shafts having intersecting axes. a) True b) False
Description : Which of the following are not true for petroff’s equation? a) Shaft is considered concentric with the bearing b) Bearing is subjected to light load c) Is used to find coefficient of friction d) Frictional torque is given by fpr2l
Last Answer : d) Frictional torque is given by fpr2l
Description : For two stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m
Last Answer : (B) 2πT m
Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and height of the key being 14mm and 80mm respectively. Find the compressive stress induced in the key. a) 70.1 N/mm2 b) 51.6N/mm2 c) 45.5N/mm2 d) None of the listed
Last Answer : b) 51.6N/mm2