Description : A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these
Last Answer : A. Co-axial
Description : Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False
Last Answer : A. True
Description : Cotter joint is a permanent fastening. a) true b) false
Last Answer : b) false
Description : The taper on cotter and slot is fomed on both the location is agreed or not.. a) agree b) disagree
Last Answer : b) disagree
Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing
Last Answer : A. Cotter joints
Description : Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above
Last Answer : c) Axial tensile or compressive
Description : Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False
Last Answer : b) False
Description : Cotter joints is used for transforming rotating torque. A. True B. False
Last Answer : B. False
Description : Cotter joint is connected to parallel roads . A. True B. False
Description : Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load
Last Answer : C. Axial tensile or compressive load
Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined
Last Answer : A. Co - axial
Description : Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar
Last Answer : d) Collar
Description : Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False
Description : The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Last Answer : B. Knuckle joint
Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing
Description : Taper on Cotter is varies from A. 1 in 15 to 1 in 12 B. 1 in 20 to 1 in 15 C. 1 in 25 to 1 in 20 D. 1 in 48 to 1 in 24
Last Answer : D. 1 in 48 to 1 in 24
Description : Taper is made cotter and slot on both the side. A. Yes B. No
Last Answer : B. No
Description : Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False
Description : Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar
Description : Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False
Last Answer : a) True
Description : The principle of wedge action is used in cotter joint. a) True b) False
Description : Cotter joint is used when the members are subjected to which type of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the mentioned
Description : If a bearing is designated by the number 305, it means that the bearing is of (a) light series whose bore is 5 mm (b) light series whose bore is 25 mm (c) medium series whose bore is 5 mm (d) medium series whose bore is 25 mm
Last Answer : (d) medium series whose bore is 25 mm
Description : Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm2. a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm
Last Answer : b) 41.2mm
Description : A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160
Last Answer : 2. 790
Description : A rolling contact bearing is specified as X307. Calculate the bearing diameter. (a) 35 mm (b) 28 mm (c) 21 mm (d) 7 mm
Last Answer : (a) 35 mm
Description : The unit of viscosity is (A) N/mm2 (B) N-mm (C) N-s/mm2
Last Answer : (C) N-s/mm2
Description : The designation M 36 × 2 means (A) Metric fine threads of 36 mm outside diameter and 2 mm pitch (B) Metric coarse threads of 36 mm outside diameter and 2 mm pitch (C) Metric threads of 36 mm pitch diameter and 2 mm pitch (D) Metric threads of 36 mm core diameter and 2 mm pitch
Last Answer : (A) Metric fine threads of 36 mm outside diameter and 2 mm pitch
Description : The needle rollers are a maximum of _______ millimeter in diameter. (a) 4 (b) 5 (c) 6 (d) 7
Last Answer : (b) 5
Description : Factor of safety in the design of springs is usually (A) 1.5 or less (B) 3 or less (C) 4.5 or less (D) 6 or less
Last Answer : (A) 1.5 or less
Description : Standard coarse threads are equally strong in failure by shear and failure by tension, if the height of nut is (A) h = 0.4 d (B) h = 0.6 d (C) h = 0.5 d (D) h = d
Last Answer : (A) h = 0.4 d
Description : If shaft diameter is 30mm and number of pins emplaced are 6, then the diameter of the pin will be? a) 6.4mm b) 5.6mm c) 6.1mm d) 5.9mm
Last Answer : c) 6.1mm
Description : Standard length of shaft is a ....... A. 5 meter B. 6 meter C. 7 meter D. All of these
Last Answer : D. All of these
Description : Which of the following conditions is true for repeated stress? 1. σ m = 0 2. σ m = σ max / 2 3. σ m = σ a 4. σ min = 0 5. σ min = - σ max 6. σ a = σ max / 2 where σ m = mean ... amplitude a. condition 2 and 3 b. condition 1, 3 and 5 c. condition 2, 4, and 6 d. condition 3,4, 5 and 6
Last Answer : c. condition 2, 4, and 6
Description : According to Indian standard specifications, 100 H6/g5 means that (A) Tolerance grade for the hole is 6 and for the shaft is 5 (B) Tolerance grade for the shaft is 6 and for the hole is 5 (C) Tolerance grade for ... is 3 to 7 (D) Tolerance grade for the hole is 4 to 8 and for the shaft is 3 to 7
Last Answer : (A) Tolerance grade for the hole is 6 and for the shaft is 5
Description : What is the difference between a Clevis pin and a Cotter pin?
Last Answer : Clevis Cotter Pin
Description : What was the two purpose of providing clearance in cotter joint?
Last Answer : Feel Free to Answer
Description : In a faceplate-type motor starter, the starting arm is held in the 'OFF' position by a/an _____________. A. cotter pin B. magnet C. electrical circuit D. strong spring
Last Answer : Answer: D
Description : Find the Wahl’s factor if spring index is 6. a) 1.2020 b) 1.2424 c) 1.2525 d) 1.5252
Last Answer : c) 1.2525
Description : Calculate the force acting on the each pin in flexible coupling if torque transmitted is 397N-m and PCD=120mm with number of pins 6. a) 1400.3N b) 1102.8N c) 1320.3N d) None of the listed
Last Answer : b) 1102.8N
Description : Find the shear stress in a flange at the junction of hub in rigid flanged coupling if torsional moment is 2980N-m and diameter of hub being 125mm. Also the thickness of flange is 25mm. a) 6.77N/mm2 b) 10.24N/mm2 c) 4.84N/mm2 d) 4.22N/mm2
Last Answer : c) 4.84N/mm2
Description : The maximum number of principal stresses is a. 2 b. 4 c. 6 d. None
Last Answer : d. None