The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False

The knuckle joint is used two joint between the tie bars in roof trusses.

A. True

B. False
by

1 Answer

Answer :

A. True
by

Related questions

The real application of knuckle joint is used to connect three rods - two with forks and a third with the eye. A. True B. False

Description : The real application of knuckle joint is used to connect three rods - two with forks and a third with the eye. A. True B. False

Last Answer : A. True

Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False

Description : Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False

Last Answer : A. True

A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False

Description : A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False

Last Answer : a) True

A knuckle joint is also called socket pin joint. a) True b) False

Description : A knuckle joint is also called socket pin joint. a) True b) False

Last Answer : b) False

The type of joint commonly used at the junction of a principal rafter and tie beam in timber trusses is (A) Mortise and tenon joint (B) Oblique mortise and tenon joint (C) Butt joint (D) Mitred joint

Description : The type of joint commonly used at the junction of a principal rafter and tie beam in timber trusses is (A) Mortise and tenon joint (B) Oblique mortise and tenon joint (C) Butt joint (D) Mitred joint

Last Answer : Answer: Option B

The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple plane. C. Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above

Description : The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple ... Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above

Last Answer : A. Two roads whose Axes are coincide or intersecting and lies in single plane.

Knuckle Joint can’t be used to connect two intersecting rods. a) Yes b) No, it can’t be used c) It can be used with some modificatios d) It is expensive and hence isn’t used

Description : Knuckle Joint can’t be used to connect two intersecting rods. a) Yes b) No, it can’t be used c) It can be used with some modificatios d) It is expensive and hence isn’t used

Last Answer : b) No, it can’t be used

Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

The knuckle joint is made up of... A. Cast iron B. stainless Steel C. Teflon D. All of the above

Description : The knuckle joint is made up of... A. Cast iron B. stainless Steel C. Teflon D. All of the above

Last Answer : D. All of the above

The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The diameter of knuckle pin in the knuckle joint is usually... A. 0.5 d B. 0.8 d C. 1.5 d D. d

Description : The diameter of knuckle pin in the knuckle joint is usually... A. 0.5 d B. 0.8 d C. 1.5 d D. d

Last Answer : D. d

To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Which of the following are parts of knuckle joint. A. Eye B. Pin C.Fork D. All of the above

Description : Which of the following are parts of knuckle joint. A. Eye B. Pin C.Fork D. All of the above

Last Answer : D. All of the above

Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Maximum rod connecting limit by using knuckle joint is . A. 2 B. 3 C. 4 D. 5

Description : Maximum rod connecting limit by using knuckle joint is . A. 2 B. 3 C. 4 D. 5

Last Answer : B. 3

In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

A knuckle joint can be used in valve mechanism of a reciprocating engine. a) Yes b) No c) Yes but there are stress probles d) No as it is very dangerous to use

Description : A knuckle joint can be used in valve mechanism of a reciprocating engine. a) Yes b) No c) Yes but there are stress probles d) No as it is very dangerous to use

Last Answer : a) Yes

Which of the following are important parts of knuckle joint? a) Eye b) Pin c) Fork d) Each of the mentioned

Description : Which of the following are important parts of knuckle joint? a) Eye b) Pin c) Fork d) Each of the mentioned

Last Answer : d) Each of the mentioned

A maximum of how many roads may be connected using a knuckle joint? a) 2 b) 3 c) 4 d) 5

Description : A maximum of how many roads may be connected using a knuckle joint? a) 2 b) 3 c) 4 d) 5

Last Answer : b) 3

Teflon can be used for manufacturing of knuckle joints. A. True B. False

Description : Teflon can be used for manufacturing of knuckle joints. A. True B. False

Last Answer : A. True

If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Description : If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Last Answer : Answer: Option D

If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Description : If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Last Answer : Answer: Option C

How do you securely, and properly reinforce damaged roof trusses?

Description : How do you securely, and properly reinforce damaged roof trusses?

Last Answer : to replace trusses you need to first place alternate load-bearing measures. Run a support header beneath the ridge of your roof, to the length of your roof. Construct support walls or beams. Reinforce ... trusses after the new support system is placed and last but not least place the new trusses.

If you bought roof trusses do you need delivery?

Description : If you bought roof trusses do you need delivery?

Last Answer : It is dependent on where you live, but roof trusses are available to purchase and be delivered to your house. Or you could pick up the trusses yourself if you prefer those means.

The purlins in roof trusses are placed at the panel points essentially to avoid (a) Axial force in rafter (b) Shear force in rafter (c ) Deflection in rafter (d) Bending moment in rafter

Description : The purlins in roof trusses are placed at the panel points essentially to avoid (a) Axial force in rafter (b) Shear force in rafter (c ) Deflection in rafter (d) Bending moment in rafter

Last Answer : (d) Bending moment in rafter

Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Description : Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Last Answer : b) False

Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

A but joint can be defined as a joint between two components lying approximately in a different plane. a) True b) False

Description : A but joint can be defined as a joint between two components lying approximately in a different plane. a) True b) False

Last Answer : b) False

Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Description : Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Last Answer : A. True

Cotter joint is a permanent fastening. a) true b) false

Description : Cotter joint is a permanent fastening. a) true b) false

Last Answer : b) false

Cotter joint is connected to parallel roads . A. True B. False

Description : Cotter joint is connected to parallel roads . A. True B. False

Last Answer : B. False

Cotter joint is connected to parallel roads . A. True B. False

Description : Cotter joint is connected to parallel roads . A. True B. False

Last Answer : B. False

The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False

Description : The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False

Last Answer : b) False

Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False

Description : Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False

Last Answer : a) True

The principle of wedge action is used in cotter joint. a) True b) False

Description : The principle of wedge action is used in cotter joint. a) True b) False

Last Answer : a) True

Tie bars in cement concrete pavements are at (A) Expansion joints (B) Contraction joints (C) Warping joints (D) Longitudinal joints

Description : Tie bars in cement concrete pavements are at (A) Expansion joints (B) Contraction joints (C) Warping joints (D) Longitudinal joints

Last Answer : Answer: Option D

In a colar beam roof (A) There is no horizontal tie beam (B) There is a horizontal tie at the feet of rafters only (C) There is a horizontal tie at almost the middle of rafters only (D) There are two horizontal ties, one at the feet and other at the middle of the rafters

Description : In a colar beam roof (A) There is no horizontal tie beam (B) There is a horizontal tie at the feet of rafters only (C) There is a horizontal tie at almost the middle of rafters only (D) There are two horizontal ties, one at the feet and other at the middle of the rafters

Last Answer : Answer: Option C

The function of king post in a king post roof truss is (A) To support the frame work of the roof (B) To receive the ends of principal rafter (C) To prevent the walls from spreading outward (D) To prevent the tie beam from sagging at its centre

Description : The function of king post in a king post roof truss is (A) To support the frame work of the roof (B) To receive the ends of principal rafter (C) To prevent the walls from spreading outward (D) To prevent the tie beam from sagging at its centre

Last Answer : Answer: Option D

A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these

Description : A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these

Last Answer : A. Co-axial

Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above

Description : Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above

Last Answer : c) Axial tensile or compressive

Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Description : Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Last Answer : d) Collar

The angle of V-welded joint in a pressure vessel 30 to 45 0 40 to 55 0 55 to 70 0 None

Description : The angle of V-welded joint in a pressure vessel 30 to 45 0 40 to 55 0 55 to 70 0 None

Last Answer : 55 to 70 0

Welded joints are a. Hinged joint b. Rigid joint c. Freely supported joint

Description : Welded joints are a. Hinged joint b. Rigid joint c. Freely supported joint

Last Answer : b. Rigid joint

Welded structures with respect to riveted joint is a. Weakened in tension b. Strengthened in tension c. No change in tension strength d. None

Description : Welded structures with respect to riveted joint is a. Weakened in tension b. Strengthened in tension c. No change in tension strength d. None

Last Answer : c. No change in tension strength

The strength of a welded joint with respect to a riveted joint is a. Greater b. Smaller c. Equal d. None

Description : The strength of a welded joint with respect to a riveted joint is a. Greater b. Smaller c. Equal d. None

Last Answer : a. Greater

Efficiency of a welded joint with respect to a riveted joint is a. Smaller b. Equal c. Greater

Description : Efficiency of a welded joint with respect to a riveted joint is a. Smaller b. Equal c. Greater

Last Answer : c. Greater

Which welded joint used in the circumferential joint of a cylindrical pressure vessel is (i) Butt joint (ii) Lap joint (iii)Screwed joint (iv) None

Description : Which welded joint used in the circumferential joint of a cylindrical pressure vessel is (i) Butt joint (ii) Lap joint (iii)Screwed joint (iv) None

Last Answer : (ii) Lap joint