Mention the advantages of integrated circuits over discrete components.

Mention the advantages of integrated circuits over discrete components.
by

1 Answer

Answer :

*Miniaturisation and hence increased equipment density.

*Cost reduction due to batch processing.

*Increased system reliability due to the elimination of soldered joints.

*Improved functional performance.

*Matched devices. *Increased operating speeds.

*Reduction in power consumption.
by

Related questions

Justify the reasons for using current sources in integrated circuits.

Description : Justify the reasons for using current sources in integrated circuits.

Last Answer : (i) Superior insensitivity of circuit performance to power supply variations and temperature.  (ii) More economical than resistors in terms of die area required to provide bias currents of ... the high incremental resistance of current source results in high voltage gain at low supply voltages.

Integrated circuits contained 1) 10 to 20 components 2) 20 to 30 components 3) 25 to 25 components 4) 35 to 25 components

Description : Integrated circuits contained 1) 10 to 20 components 2) 20 to 30 components 3) 25 to 25 components 4) 35 to 25 components

Last Answer : 1) 10 to 20 components

Integrated circuits contained 1 10 to 20 components 2 20 to 30 components 3 25 to 25 components 4 35 to 25 components

Description : Integrated circuits contained 1 10 to 20 components 2 20 to 30 components 3 25 to 25 components 4 35 to 25 components

Last Answer : 1 10 to 20 components

List any 4 advantages and any 4 disadvantages of Integrated circuits.

Description : List any 4 advantages and any 4 disadvantages of Integrated circuits.

Last Answer : Advantages of Integrated circuits:- 1. Extremely small size. 2. Very small weight . 3. Very low cost . 4. More reliable . 5. Lower power consumption . 6. Easy replacement ... achieved.  9.Large value of saturation resistance of transistors. 10.Voltage dependence of resistor and capacitors.

Mention two advantages that a mini steel plant has over an integrated iron and steel plant. -Geography

Description : Mention two advantages that a mini steel plant has over an integrated iron and steel plant. -Geography

Last Answer : Advantages of Mini steel plants are: 1. They use the electric arc furnace and thus conserve coal. 2. They require small capital investment. 3. They cater to the local need of the market and the cost of transport is reduced.

Mention three advantages that a mini steel plant has over an integrated steel plant. -Geography

Description : Mention three advantages that a mini steel plant has over an integrated steel plant. -Geography

Last Answer : Advantages of Mini steel plants are : 1. They use the electric arc furnace and thus conserve coal. 2. They require smart capital investment. 3. They cater to the local need of the market and the cost of transport is reduced.

Mention three advantages that a mini steel plant has over an integrated steel plant. -SST 10th

Description : Mention three advantages that a mini steel plant has over an integrated steel plant. -SST 10th

Last Answer : The advantages are: Mini Steel Plants use electric furnaces thus conserving coking coal. They require less capital investments. Since they are located in industrial towns so transport cost is reduced. It is ecofriendly does not require large capital investment.

A source code whose average word length approaches the fundamental limit set by the entropy of a discrete memoryless source. A. Prefix code B. Huffman code C. Entropy code D. Source code

Description : A source code whose average word length approaches the fundamental limit set by the entropy of a discrete memoryless source. A. Prefix code B. Huffman code C. Entropy code D. Source code

Last Answer : B. Huffman code

Combination of modulator, channel and detector. A. Transceiver B. Discrete channel C. T/R channel D. Transponder

Description : Combination of modulator, channel and detector. A. Transceiver B. Discrete channel C. T/R channel D. Transponder

Last Answer : B. Discrete channel

Mention the advantages of opto-couplers:

Description : Mention the advantages of opto-couplers:

Last Answer : *Better isolation between the two stages. *Impedance problem between the stages is eliminated. *Wide frequency response. *Easily interfaced with digital circuit. *Compact and light weight. *Problems such as noise, transients, contact bounce,.. are eliminated. 

Mention the advantages of Wilson current source.

Description : Mention the advantages of Wilson current source.

Last Answer : (i) Provides high output resistance. (ii) Offers low sensitivity to transistor base currents.

What is the advantages of VLSI over discrete system?

Last Answer : VLSI is small and consume less power and its designing is easy.

This component is required to process data into information and consists of integrated circuits. 1) Hard disk 2) RAM 3) CPU 8 4) ROM 5) None of these

Description : This component is required to process data into information and consists of integrated circuits. 1) Hard disk 2) RAM 3) CPU 8 4) ROM 5) None of these

Last Answer : Answer :3

MSI stands for A) Medium Scale Integrated Circuits B) Medium System Integrated Circuits C) Medium Scale Intelligent Circuit D) Medium System Intelligent Circuit

Description : MSI stands for A) Medium Scale Integrated Circuits B) Medium System Integrated Circuits C) Medium Scale Intelligent Circuit D) Medium System Intelligent Circuit

Last Answer : Answer : A

Who invented Integrated Circuits? A) Jack Kilby B) Robert Noyce C) Both of above D) None of above

Description : Who invented Integrated Circuits? A) Jack Kilby B) Robert Noyce C) Both of above D) None of above

Last Answer : Answer : C

The main electronic component used in first generation computers was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Description : The main electronic component used in first generation computers was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Last Answer : Answer : B

Chief component of first generation computer was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Description : Chief component of first generation computer was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Last Answer : Answer : B

Integrated Circuits (ICs) are related to which generation of computers? A) First generation B) Second generation C) Third generation D) Fourth generation

Description : Integrated Circuits (ICs) are related to which generation of computers? A) First generation B) Second generation C) Third generation D) Fourth generation

Last Answer : Answer : C

The element of used in making integrated circuits is

Description : The element of used in making integrated circuits is

Last Answer : silicon.

Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : Vacuum Tubes and Valves

MSI stands for a. Medium Scale Integrated Circuits b. Medium System Integrated Circuits c. Medium Scale Intelligent Circuit d. Medium System Intelligent Circuit

Description : MSI stands for a. Medium Scale Integrated Circuits b. Medium System Integrated Circuits c. Medium Scale Intelligent Circuit d. Medium System Intelligent Circuit

Last Answer : Medium Scale Integrated Circuits

MSI stands for a) Medium Scale Integrated Circuits b) Medium System Integrated Circuits c) Medium Scale Intelligent Circuit d) Medium System Intelligent Circuit

Description : MSI stands for a) Medium Scale Integrated Circuits b) Medium System Integrated Circuits c) Medium Scale Intelligent Circuit d) Medium System Intelligent Circuit

Last Answer : a) Medium Scale Integrated Circuits

.Give the variety of Integrated Circuits?

Description : .Give the variety of Integrated Circuits?

Last Answer : _ More Specialized Circuits _ Application Specific Integrated Circuits(ASICs) _ Systems-On-Chips

Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : b. Vacuum Tubes and Valves

MSI stands for a. Medium Scale Integrated Circuits b. Medium System Integrated Circuits c. Medium Scale Intelligent Circuit d. Medium System Intelligent Circuit

Description : MSI stands for a. Medium Scale Integrated Circuits b. Medium System Integrated Circuits c. Medium Scale Intelligent Circuit d. Medium System Intelligent Circuit

Last Answer : b. Medium System Integrated Circuits

Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : b. Vacuum Tubes and Valves

MSI stands for a. Medium Scale Integrated Circuits b. Medium System Integrated Circuits c. Medium Scale Intelligent Circuit d. Medium System Intelligent Circuit

Description : MSI stands for a. Medium Scale Integrated Circuits b. Medium System Integrated Circuits c. Medium Scale Intelligent Circuit d. Medium System Intelligent Circuit

Last Answer : a. Medium Scale Integrated Circuits

ASIC stands for A. Application-System Integrated Circuits B. Application-Specific Integrated Circuits C. Application-System Internal Circuits D. Application-Specific Internal Circuits

Description : ASIC stands for A. Application-System Integrated Circuits B. Application-Specific Integrated Circuits C. Application-System Internal Circuits D. Application-Specific Internal Circuits

Last Answer : B. Application-Specific Integrated Circuits 

Who amongst the following was awarded Nobel Prize for developing the technology used in integrated circuits used in PCs? (1) Robert F. Furchgott (2) Horst L. Stormer (3) Jack Kilby (4) John a. Pople

Description : Who amongst the following was awarded Nobel Prize for developing the technology used in integrated circuits used in PCs? (1) Robert F. Furchgott (2) Horst L. Stormer (3) Jack Kilby (4) John a. Pople

Last Answer : Jack Kilby

Which of the following was used as circuitry for first generation of computers? (1) Vacuum tube (2) Transistors (3) Integrated circuits (4) Microprocessors

Description : Which of the following was used as circuitry for first generation of computers? (1) Vacuum tube (2) Transistors (3) Integrated circuits (4) Microprocessors

Last Answer : Vacuum tube

Virus in a computer is a (1) Chemical that attacks silicon (2) Micro-organism that disturbs integrated circuits (3) Programme that damages the computer software (4) None of the above

Description : Virus in a computer is a (1) Chemical that attacks silicon (2) Micro-organism that disturbs integrated circuits (3) Programme that damages the computer software (4) None of the above

Last Answer : Programme that damages the computer software

A computer virus is (1) a chemical that attacks silicon. (2) a micro-organism that destroys integrated circuits. (3) data that the computer fails to handle. (4) a special kind of computer programme.

Description : A computer virus is (1) a chemical that attacks silicon. (2) a micro-organism that destroys integrated circuits. (3) data that the computer fails to handle. (4) a special kind of computer programme.

Last Answer :  a special kind of computer programme.

‘IC’ in computers stands for (1) Integrated Charge (2) Integrated Current (3) Integrated Circuits (4) Internal Circuits

Description : ‘IC’ in computers stands for (1) Integrated Charge (2) Integrated Current (3) Integrated Circuits (4) Internal Circuits

Last Answer :  Integrated Circuits

For integrated circuits photolithography is used to remove areas of a protective layer so that...

Description : For integrated circuits photolithography is used to remove areas of a protective layer so that (a) Chemical reactions can take place in exposed areas. (b) Chemical reactions can take place in ... can take place in transparent areas. (d) Chemical reactions can take place in translucent areas.

Last Answer : Chemical reactions can take place in exposed areas

What are the two common methods for obtaining integrated capacitors?

Description : What are the two common methods for obtaining integrated capacitors?

Last Answer : • Monolithic junction capacitor • Thin-flim capacitor

The Third Generation Computer was made with . A) Vacuum Tube B) Discrete Components C) IC D) Bio Chips

Description : The Third Generation Computer was made with . A) Vacuum Tube B) Discrete Components C) IC D) Bio Chips

Last Answer : Answer : C

Components made up exclusively of discrete elements are classified as what type of electronics?

Description : Components made up exclusively of discrete elements are classified as what type of electronics?

Last Answer : Miniature.

Strong interference from one particular station can be eliminated by the use of A. noise limiters B. squelch circuits C. negative feedback D. wave traps in the antenna circuitry

Description : Strong interference from one particular station can be eliminated by the use of A. noise limiters B. squelch circuits C. negative feedback D. wave traps in the antenna circuitry

Last Answer : D. wave traps in the antenna circuitry

Three identical circuits having 10 dB signal noise-to-noise ratio each are connected in tandem with each other, what is the overall S/N? A. 5.23 dB B. 14.77dB C. 30 dB D. 40 dB

Description : Three identical circuits having 10 dB signal noise-to-noise ratio each are connected in tandem with each other, what is the overall S/N? A. 5.23 dB B. 14.77dB C. 30 dB D. 40 dB

Last Answer : A. 5.23 dB

And ITU-T specification code that deals with the telephone circuits. A. X series B. T series C. V series D. I series

Description : And ITU-T specification code that deals with the telephone circuits. A. X series B. T series C. V series D. I series

Last Answer : C. V series

______ is a term in the test language for noise testing in telephone circuits that means a one-syllable word consisting of a consonant, a vowel, and another consonant. A. Logatom B. Nosfer C. Ore D. Belcore

Description : ______ is a term in the test language for noise testing in telephone circuits that means a one-syllable word consisting of a consonant, a vowel, and another consonant. A. Logatom B. Nosfer C. Ore D. Belcore

Last Answer : A. Logatom

Three telephone circuits, each having an S/N ratio of 44 dB, are connected in tandem. What is the overall S/N ratio? A. 44 dB B. 39.2 dB C. 41 dB D. 43.52 dB

Description : Three telephone circuits, each having an S/N ratio of 44 dB, are connected in tandem. What is the overall S/N ratio? A. 44 dB B. 39.2 dB C. 41 dB D. 43.52 dB

Last Answer : B. 39.2 dB

One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. Heating of capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Description : One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. ... capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Last Answer : B. Heating of capacitor in the oscillator

What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Description : What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Last Answer : C. Propagation delay

One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency oscillation. A. Heating and expansion of oscillator coil B. DC and RF ac heating of resistors which cause change in values C. Heating of capacitor in the oscillatorD. Loose connections in the oscillator, amplifier, or antenna circuits.

Description : One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency ... capacitor in the oscillator D. Loose connections in the oscillator, amplifier, or antenna circuits.

Last Answer : D. Loose connections in the oscillator, amplifier, or antenna circuits.

Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections B. Power supply voltage changes C. Loose connections in the oscillator, amplifier, or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Description : Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections ... , or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Last Answer : D. DC and RF heating of resistors, causing then to change values.

Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits

Description : Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits

Last Answer : D. They have clock recovery circuits

What are the requirements for biasing circuits?

Description : What are the requirements for biasing circuits?

Last Answer : · The q point must be taken at the Centre of the active region of the output characteristics. · Stabilize the collector current against the temperature variations. · Make the q point independent of the transistor parameters. · When the transistor is replaced, it must be of same type.

What are the types of filter circuits?

Description : What are the types of filter circuits?

Last Answer : The types of filter circuits are Inductor filter Capacitor filter LC filter CLC or π filter