State the advantages of dual slope ADC

State the advantages of dual slope ADC
by

1 Answer

Answer :

 It provides excellent noise rejection of ac signals whose periods are integral multiples of the integration time T. It is defined as the total time required to convert an analog signal into its digital output. It depends on the conversion technique used & the propagation delay of circuit components.
by

Related questions

What is the main drawback of a dual-slop ADC?

Description : What is the main drawback of a dual-slop ADC?

Last Answer : The dual slope ADC has long conversion time. This is the main drawback of dual slope ADC

Integrating or Dual Slope ADC

Description : Integrating or Dual Slope ADC

Last Answer : Operation: At the start of measurement the counter is reset to zero. So output of flip-flop is zero. This is applied to the switch control. The switch control now connects input voltage (Vin) to ... Then the data from counter is passed to the digital readout for display purpose.

Which is the fastest ADC and why?

Description : Which is the fastest ADC and why?

Last Answer : Simultaneous type A/D converter(flash type A/D converter) is the fastest because A/D conversion is performed simultaneously through a set of comparators 

Explain in brief the principle of operation of successive Approximation ADC.

Description : Explain in brief the principle of operation of successive Approximation ADC.

Last Answer : The circuit of successive approximation ADC consists of a successive approximation register (SAR), to find the required value of each bit by trial & error.With the arrival of START command, SAR sets the MSB ... /P signal. This O/P is low or High. This process continues until all bits are checked.

The transistor with the lowest noise figure in the microwave region is a A. MOSFET B. Dual-gate MOSFET C. JFET D. MESFET

Description : The transistor with the lowest noise figure in the microwave region is a A. MOSFET B. Dual-gate MOSFET C. JFET D. MESFET

Last Answer : D. MESFET

Which frequency reuse method is less effective because of Faraday’s effect? A. Dual polarization B. Reducing antenna beamwidth C. Zonal rotation D. Spin stabilization

Description : Which frequency reuse method is less effective because of Faraday’s effect? A. Dual polarization B. Reducing antenna beamwidth C. Zonal rotation D. Spin stabilization

Last Answer : A. Dual polarization

The conversation speed of an analog to digital converter is maximum with the following technique. (A) Dual slope AD converter. (B) Serial comparator AD converter. (C) Successive approximation AD converter. (D) Parallel comparator AD converter.

Description : The conversation speed of an analog to digital converter is maximum with the following technique. (A) Dual slope AD converter. (B) Serial comparator AD converter. (C) Successive approximation AD converter. (D) Parallel comparator AD converter.

Last Answer : (D) Parallel comparator AD converter.

The A/D converter whose conversion time is independent of the number of bits is (A) Dual slope (B) Counter type (C) Parallel conversion (D) Successive approximation.

Description : The A/D converter whose conversion time is independent of the number of bits is (A) Dual slope (B) Counter type (C) Parallel conversion (D) Successive approximation.

Last Answer : Ans: C The A/D converter whose conversion time is independent of the Number of bits is Parallel conversion. (This type uses an array of comparators connected in parallel and comparators compare the input voltage at a particular ratio of the reference voltage).

The speed of conversion is maximum in (A) Successive-approximation A/D converter. (B) Parallel-comparative A/D converter. (C) Counter ramp A/D converter. (D) Dual-slope A/D converter.

Description : The speed of conversion is maximum in (A) Successive-approximation A/D converter. (B) Parallel-comparative A/D converter. (C) Counter ramp A/D converter. (D) Dual-slope A/D converter.

Last Answer : Ans: B The speed of conversion is maximum in Parallel-comparator A/D converter (Speed of conversion is maximum because the comparisons of the input voltage are carried out simultaneously.)

Draw block diagram of Dual slope integrating voltmeter and also draw waveform for voltage V/s time.

Description : Draw block diagram of Dual slope integrating voltmeter and also draw waveform for voltage V/s time. 

Last Answer : Block diagram

Compare Dual slope DVM and SAR type DVM.

Description : Compare Dual slope DVM and SAR type DVM.

Last Answer : Sr no Dual slope DVM SAR type DVM 1 It is highly accurate It is moderately accurate 2 Cost is high It is inexpensive 3 Two comparator is used One comparator is used ... resolution Good resolution 5 Slow speed High speed 6 Less Error More error

Dual slope integration type Analog-to- Digital converters provide

Last Answer : Dual slope integration type analog to digital converter provide   Very good accuracy without putting extreme requirements on           component stability and   Good rejection of power supply hum

Which of the following term best described the overload distortion? A. Peak limiting B. Quantization noise C. Granular noise D. Slope distortion

Description : Which of the following term best described the overload distortion? A. Peak limiting B. Quantization noise C. Granular noise D. Slope distortion

Last Answer : A. Peak limiting

_______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload

Description : _______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload

Last Answer : D. Slope overload

Define slope overload noise and granular noise.

Description : Define slope overload noise and granular noise.

Last Answer : Slope overload noise is introduced due to the use of a step size delta is too small To follow some portions of the waveform with a step size.   Granular noise results from using a step size that is too large in parts of the waveform having a small slope. 

State features of ADC 0808.

Description : State features of ADC 0808.

Last Answer : 1. Easy to interface with all Microprocessors or works Stand alone. 2. Eight channel 8-bit ADC module. 3. Can measure up to 8 Analog values. 4. On chip Clock not available, external Oscillator ... (Clock). 5. Digital output various from 0 to 255, operating power is 15mW, conversion time 100us.

State important specification parameters of ADC

Description : State important specification parameters of ADC

Last Answer : Accuracy Resolution Linearity Conversion time Settling time stability

What are the advantages of a dual SIM phone?

Description : What are the advantages of a dual SIM phone?

Last Answer : A dual SIM phone allows for greater memory capacity and easy transfer of information between it and other phones. If your dual SIM phone is chewed up, all the contacts and photos will still be safe on the SIM cards and can easily be switched over to a non-chewed phone.

One of the advantages of fiber optic which is referred to the volume of capacity of signals it can carry. A. Security B. Weight C. Bandwidth D. Physical size

Description : One of the advantages of fiber optic which is referred to the volume of capacity of signals it can carry. A. Security B. Weight C. Bandwidth D. Physical size

Last Answer : C. Bandwidth

One of the following is not among the advantages of series modulation A. No transformer B. Suppressed white noise C. Simple.D. Modulates any frequency

Description : One of the following is not among the advantages of series modulation A. No transformer B. Suppressed white noise C. Simple D. Modulates any frequency

Last Answer : B. Suppressed white noise

What are the advantages of fixed bias circuit?

Description : What are the advantages of fixed bias circuit?

Last Answer : This is simple circuit which uses a few components. The operating point can be fixed any where on the Centre of the active region

Mention the advantages of opto-couplers:

Description : Mention the advantages of opto-couplers:

Last Answer : *Better isolation between the two stages. *Impedance problem between the stages is eliminated. *Wide frequency response. *Easily interfaced with digital circuit. *Compact and light weight. *Problems such as noise, transients, contact bounce,.. are eliminated. 

What are the advantages of IC voltage regulators?

Description : What are the advantages of IC voltage regulators?

Last Answer : *low cost *high reliability *reduction in size *excellent performance

What are the advantages and disadvantages of R-2R ladder DAC?

Description : What are the advantages and disadvantages of R-2R ladder DAC?

Last Answer : Advantage: • Easier to build • Number of bits can be expanded by adding more sections. Disadvantage: • More power dissipation makes heating, which in turns develops non-linearties in DAC.

What are the main advantages of integrating type ADCs?

Description : What are the main advantages of integrating type ADCs?

Last Answer : a. The integrating type of ADC’s do not need a sample/Hold circuit at the input. b. It is possible to transmit frequency even in noisy environment or in an isolated form.

What are the advantages of active filters?

Description : What are the advantages of active filters?

Last Answer : Active filters used op- amp as the active element and resistors and capacitors as passive elements.

Mention the advantages of Wilson current source.

Description : Mention the advantages of Wilson current source.

Last Answer : (i) Provides high output resistance. (ii) Offers low sensitivity to transistor base currents.

What are the advantages and limitations implantation of ion implantation?

Description : What are the advantages and limitations implantation of ion implantation?

Last Answer : Advantages: • Accurate control over doping • Very good reproducibility • Precise resistance value • A room temperature process Limitations: • Annealing at higher temperature is required for avoiding the crystal damage • The possibility of dopant implanting through various layers of wafer.

Mention the advantages of integrated circuits over discrete components.

Description : Mention the advantages of integrated circuits over discrete components.

Last Answer : *Miniaturisation and hence increased equipment density. *Cost reduction due to batch processing. *Increased system reliability due to the elimination of soldered joints. *Improved functional performance. *Matched devices. *Increased operating speeds. *Reduction in power consumption.

What is an Analog-to-Digital Converter (ADC) in Arduino?

Description : What is an Analog-to-Digital Converter (ADC) in Arduino?

Last Answer : An Analog-to-Digital Converter (ADC) in Arduino is a component that converts analog signals, such as temperature or light, into digital signals that can be processed by the microcontroller.

ABC and ADC are two right triangles with common hypotenuse AC. Prove that angle CAD = angle CAB -Maths 9th

Description : ABC and ADC are two right triangles with common hypotenuse AC. Prove that angle CAD = angle CAB -Maths 9th

Last Answer : Given, AC is the common hypotenuse. ∠B = ∠D = 90°. To prove, ∠CAD = ∠CBD Proof: Since, ∠ABC and ∠ADC are 90°. These angles are in the semi circle. Thus, both the triangles are lying in the semi ... D are concyclic. Thus, CD is the chord. ⇒ ∠CAD = ∠CBD (Angles in the same segment of the circle)

ABC and ADC are two right triangles with common hypotenuse AC. Prove that angle CAD = angle CAB -Maths 9th

Description : ABC and ADC are two right triangles with common hypotenuse AC. Prove that angle CAD = angle CAB -Maths 9th

Last Answer : Given, AC is the common hypotenuse. ∠B = ∠D = 90°. To prove, ∠CAD = ∠CBD Proof: Since, ∠ABC and ∠ADC are 90°. These angles are in the semi circle. Thus, both the triangles are lying in the semi ... D are concyclic. Thus, CD is the chord. ⇒ ∠CAD = ∠CBD (Angles in the same segment of the circle)

In the figure, find teh perimeter of the shaded region where. ADC, AEB and BFC are semi-circles on diameters AC, AB and BC respectively. -Maths 10th

Description : In the figure, find teh perimeter of the shaded region where. ADC, AEB and BFC are semi-circles on diameters AC, AB and BC respectively. -Maths 10th

Last Answer : Given: Diameter of semicircle AEB= 2.8 cm RADIUS OF SEMICIRCLE(AEB)= 2.8/2= 1.4 cm Diameter of semicircle BFC=1.4 cm RADIUS OF SEMICIRCLE(BFC)= 1.4/2= 0.7 cm Diameter of semicircle ADC= 2.8+1.4 = ... ; .6 = 13.2 cm Hence, the perimeter of the shaded region is 13.2 cm HOPE THIS WILL HELP YOU...

What is the full form of ADC ?

Description : What is the full form of ADC ?

Last Answer : The full form of ADC is Aeitional Deputy Commissioner.

In the above figure, O is the centre of the circle AB,AD and CD are the chords . If `/_ ADC=130^(@)` then fid `/_ ACB`.

Description : In the above figure, O is the centre of the circle AB,AD and CD are the chords . If `/_ ADC=130^(@)` then fid `/_ ACB`.

Last Answer : In the above figure, O is the centre of the circle AB,AD and CD are the chords . If `/_ ADC=130^(@)` then fid `/_ ACB`.

A ______ is a combination load balancer and application server that is a server placed between a firewall or router. a) ABC b) ACD c) ADC d) All of the mentioned

Description : A ______ is a combination load balancer and application server that is a server placed between a firewall or router. a) ABC b) ACD c) ADC d) All of the mentioned

Last Answer : ADC

A ______ is a combination load balancer and application server that is a server placed between a firewall or router. a) ABC b) ACD c) ADC d) All of the mentioned

Description : A ______ is a combination load balancer and application server that is a server placed between a firewall or router. a) ABC b) ACD c) ADC d) All of the mentioned

Last Answer : ADC

. A ______ is a combination load balancer and application server that is a server placed between a firewall or router. a) ABC b) ACD c) ADC d) All of the mentioned

Description : . A ______ is a combination load balancer and application server that is a server placed between a firewall or router. a) ABC b) ACD c) ADC d) All of the mentioned

Last Answer : ADC

What is the result if the input of ADC is changing while performing conversion? A

Description : What is the result if the input of ADC is changing while performing conversion? A

Last Answer : Aperture distortion

Resolution of ADC is defined as a) 1/ (2N – 1) b) 2N-1 c) 1/ (2N-1) d) 2N-1

Description : Resolution of ADC is defined as a) 1/ (2N – 1) b) 2N-1 c) 1/ (2N-1) d) 2N-1

Last Answer : b) 2N-1

In ADC 0808 if _______ pin high enables output. a) EOC b) I/P0-I/P7 c) SOC d) OE

Description : In ADC 0808 if _______ pin high enables output. a) EOC b) I/P0-I/P7 c) SOC d) OE

Last Answer : b) I/P0-I/P7

What are the commonest congenitally missing teeth:VERY CONTROVERSIAL BUT SEE THE SAMPLE QUESTIONS FROM ADC IT’S THE ANSWER A. 12, 22 B. 35, 45 ACC TO CAMERON C. 15, 25 D. 33, 43

Description : What are the commonest congenitally missing teeth:VERY CONTROVERSIAL BUT SEE THE SAMPLE QUESTIONS FROM ADC IT’S THE ANSWER A. 12, 22 B. 35, 45 ACC TO CAMERON C. 15, 25 D. 33, 43

Last Answer : A. 12, 22

Which one of the following is true about oral hairy leukoplakia?** ADC M07 A. Associated with HIV virus infection and is commonly seen on the dorsal of the tongue B. Associated with HIV virus infection and is commonly seen on the lateral side of the tongue C. Usually caused by Candida species D. Always associated with trauma to the lateral side of the tongue E. Always associated with pernicious anaemia

Description : Which one of the following is true about oral hairy leukoplakia?** ADC M07 A. Associated with HIV virus infection and is commonly seen on the dorsal of the tongue B. Associated with HIV ... Always associated with trauma to the lateral side of the tongue E. Always associated with pernicious anaemia

Last Answer : B. Associated with HIV virus infection and is commonly seen on the lateral side of the tongue C. Usually caused by Candida species

As far as surgical removal of wisdom teeth is concerned, which of the following is true?**CHECK A. Prophylactic prescription of antibiotic reduces dramatically the chances of infection B. Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve ADC M07 C. Prophylactic prescription of dexamethasone will dramatically reduces post operative swelling D. Inferior dental nerve injury is unlikely since the nerve passes medial to the wisdom tooth root E. The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Description : As far as surgical removal of wisdom teeth is concerned, which of the following is true?**CHECK A. Prophylactic prescription of antibiotic reduces dramatically the chances of infection B. Raising ... root E. The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Last Answer : C. Prophylactic prescription of dexamethasone will dramatically reduces post operative swelling

Loss of sensation in the lower lip may be produced by,CHECK ADC M07 A. Bell’s palsy B. Traumatic bone cyst C. Trigeminal neuralgia D. Fracture in the mandible first molar region E. Ludwig’s angina Loss of sensation in the lower lip may be produced by,CHECK ADC M07 A. Bell’s palsy B. Traumatic bone cyst C. Trigeminal neuralgia D. Fracture in the mandible first molar region E. Ludwig’s angina

Description : Loss of sensation in the lower lip may be produced by,CHECK ADC M07 A. Bell’s palsy B. Traumatic bone cyst C. Trigeminal neuralgia D. Fracture in the mandible first molar region E. Ludwig’s angina

Last Answer : D. Fracture in the mandible first molar region E. Ludwig’s angina

Before filling a class V abrasion cavity with GIC you should(+adc March07) A. Clean with pumice, rubber cup, water and weak acid B. Dry the cavity thoroughly before doing anything C. Acid itch cavity then dry thoroughly

Description : Before filling a class V abrasion cavity with GIC you should(+adc March07) A. Clean with pumice, rubber cup, water and weak acid B. Dry the cavity thoroughly before doing anything C. Acid itch cavity then dry thoroughly

Last Answer : A. Clean with pumice, rubber cup, water and weak acid

Define ADC and DAC. Write two applications of each.

Description : Define ADC and DAC. Write two applications of each.

Last Answer : ADC An analog to digital converter (ADC), converts any analog signal into quantifiable data, which makes it easier to process and store, as well as more accurate and reliable by ... signal, hence any analog circuit can work with digital system Application - Microcontroller, washing machine

List the types of ADCs. Explain working principle of any one type of ADC.

Description : List the types of ADCs. Explain working principle of any one type of ADC.

Last Answer : Types : 1. Successive approximation type A/D converter or Potentiometric type 2.Voltage to time or ramp type A/D converter 3.Voltage to frequency or integrating type A/D converter 4.Dual ... analog voltage and reference voltage are converted to ramp signals of different slopes by the integrator.

If the range of an analog transducer is 0 to 10 V, then for a resolution of 5 mV, the bits of ADC will be _____.

Description :  If the range of an analog transducer is 0 to 10 V, then for a resolution of 5 mV, the bits of ADC will be _____.

Last Answer :  If the range of an analog transducer is 0 to 10 V, then for a resolution of 5 mV, the bits of ADC will be 11.

Number of comparators required for an 8 bit flash ADC is:

Description : Number of comparators required for an 8 bit flash ADC is: (1) 8 (2) 16 (3) 255 (4) 256

Last Answer : Number of comparators required for an 8 bit flash ADC is: 255