Define sample period and hold period.

Define sample period and hold period.
by

1 Answer

Answer :

The time during which the voltage across the capacitor in sample and hold circuit is equal to the input voltage is called sample period.The time period during which the voltage across the capacitor is held constant is called hold period. 
by

Related questions

What is a sample and hold circuit? Where it is used?

Description : What is a sample and hold circuit? Where it is used?

Last Answer : A sample and hold circuit is one which samples an input signal and holds on to its last sampled value until the input is sampled again. This circuit is mainly used in digital interfacing, analog to digital systems, and pulse code modulation systems.

Define Sample and hold period with reference to S/H circuit.

Description : Define Sample and hold period with reference to S/H circuit.

Last Answer : Sample Period:- The time period during which the voltage across the capacitor is equal to the input voltage is called sample period. Hold Period:- The time period during which the voltage across the capacitor is constant is called hold period.

For a sample rate of 40 kHz, determine the maximum analog input frequency A. 30 kHz B. 40 kHz C. 20 kHz D. 10 kHz

Description : For a sample rate of 40 kHz, determine the maximum analog input frequency A. 30 kHz B. 40 kHz C. 20 kHz D. 10 kHz

Last Answer : C. 20 kHz

Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than analog signals C. digital signals are smaller than analog signals and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Last Answer : A. repeaters regenerate digital pulses and remove distorstion

One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency oscillation. A. Heating and expansion of oscillator coil B. DC and RF ac heating of resistors which cause change in values C. Heating of capacitor in the oscillatorD. Loose connections in the oscillator, amplifier, or antenna circuits.

Description : One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency ... capacitor in the oscillator D. Loose connections in the oscillator, amplifier, or antenna circuits.

Last Answer : D. Loose connections in the oscillator, amplifier, or antenna circuits.

Explain the function of sample and hold circuit by using op-amp.

Description : Explain the function of sample and hold circuit by using op-amp.

Last Answer : sample and hold circuit by using op-amp The n-channel MOSFET is driven by a control voltage VC acts as a switch. The control voltage VC is applied to the gate of the MOSFET ... called sample period. The time period during which the voltage across capacitor is constant is called Hold period.

Sample -and -hold circuits in ADCs are designed to : -

Description : Sample -and -hold circuits in ADCs are designed to : - a) sample and hold the output of the binary counter during the conversion process b) stabilize theAD Cs threshold c) voltage ... d) signal during the conversion process sample and hold the ADC staircase waveform during the conversion process

Last Answer : Sample -and -hold circuits in ADCs are designed to : - voltage during the conversion process stabilize the input analog 

What is Sample and hold circuit ?

Last Answer : Sample and hold circuit is the important part of data converters (ADC and DAC). Sample and hold circuit is also called as track-and-hold circuit. Sample and hold circuit is use for sampling ... some time. Sample and hold circuit basically uses an analogue switch (like JFET) and capacitor.

What is the use of sample and hold circuit?

Last Answer : Sample-and-hold circuit is a device with a mode control switch that causes reading the input at the instance of the trigger and maintaining that value until the next trigger pulse.

A circular orbit around the equator with a 24-h period is called a/an A. elliptical orbit B. geostationary orbit C. polar orbit D. transfer orbit

Description : A circular orbit around the equator with a 24-h period is called a/an A. elliptical orbit B. geostationary orbit C. polar orbit D. transfer orbit

Last Answer : B. geostationary orbit

The solar cycle repeats the period of great electrical disturbance approximately every A. 11 years B. 10 years C. 9 years D. 8 years

Description : The solar cycle repeats the period of great electrical disturbance approximately every A. 11 years B. 10 years C. 9 years D. 8 years

Last Answer : A. 11 years

Power is __________. A. actual amount of power reference to 1mW B. logarithmic ratio of two powers C. definite amount of energy per time period D. current flow per time period

Description : Power is __________. A. actual amount of power reference to 1mW B. logarithmic ratio of two powers C. definite amount of energy per time period D. current flow per time period

Last Answer : C. definite amount of energy per time period

What is the orbital period of each satellite in the GPS constellation? A. 6 h B. 12 h C. 5 h D. 15 h

Description : What is the orbital period of each satellite in the GPS constellation? A. 6 h B. 12 h C. 5 h D. 15 h

Last Answer : B. 12 h

Refers to the duration occupancy period of call during its use. A. Occupancy period B. Traffic time C. Use time D. Holding time

Description : Refers to the duration occupancy period of call during its use. A. Occupancy period B. Traffic time C. Use time D. Holding time

Last Answer : D. Holding time

Is a kind of satellite which has a period of revolution equivalent to the period of rotation of the earth about its axis. A. Passive satellite B. Synchronous satellite C. Active satellite.D. Geosynchronous satellite

Description : Is a kind of satellite which has a period of revolution equivalent to the period of rotation of the earth about its axis. A. Passive satellite B. Synchronous satellite C. Active satellite D. Geosynchronous satellite

Last Answer : D. Geosynchronous satellite

When does broadcast station conduct and equipment test? A. During day time B. During night time C. At any time D. During experimental period

Description : When does broadcast station conduct and equipment test? A. During day time B. During night time C. At any time D. During experimental period

Last Answer : D. During experimental period

What is the period of a wave? A. The number of degrees in tone cycle B. The number of zero crossing in one cycle C. The amplitude of the wave D. The time required to complete one cycle

Description : What is the period of a wave? A. The number of degrees in tone cycle B. The number of zero crossing in one cycle C. The amplitude of the wave D. The time required to complete one cycle

Last Answer : D. The time required to complete one cycle

An earth satellite whose period of revolution is equal to the period of rotation of the earth about its axis. A. Geosynchronous B. Steerable C. Passive D. Active

Description : An earth satellite whose period of revolution is equal to the period of rotation of the earth about its axis. A. Geosynchronous B. Steerable C. Passive D. Active

Last Answer : A. Geosynchronous

Lowest frequency produced by a musical instrument. A. Fundamental B. Midrange C. Period D. Harmonic

Description : Lowest frequency produced by a musical instrument. A. Fundamental B. Midrange C. Period D. Harmonic

Last Answer : A. Fundamental

Power is a _____________ amount of energy used in specific period of time A. large B. definite C. electrical D. relative

Description : Power is a _____________ amount of energy used in specific period of time A. large B. definite C. electrical D. relative

Last Answer : B. definite

(2) amount of oxygen used for biochemical oxidation Explanation: Biochemical oxygen demand or B.O.D. is the amount of dissolved oxygen needed by aerobic biological organisms in a body of water to break down organic material present in a given water sample at certain temperature over a specific time period. The term also refers to a chemical procedure for determining this amount. This is not a precise quantitative test, although it is widely used as an indication of the organic quality of water.

Description : (2) amount of oxygen used for biochemical oxidation Explanation: Biochemical oxygen demand or B.O.D. is the amount of dissolved oxygen needed by aerobic biological organisms in a body of water to ... quantitative test, although it is widely used as an indication of the organic quality of water.

Last Answer : The addition of gypsum to port-land cement helps in : (1) increasing the strength of cement (2) rapid setting of cement (3) preventing rapid setting of cement (4) reduction in the cost of cement

The attest function: a. Is an essential part of every engagement performed by a CPA. b. Includes the preparation of a written report of the CPA's conclusion. c. Requires a complete review of all transactions during the period under examination. d. Requires a review of a sample of transactions during the period under examination.

Description : The attest function: a. Is an essential part of every engagement performed by a CPA. b. Includes the preparation of a written report of the CPA's conclusion. c. Requires a complete review ... under examination. d. Requires a review of a sample of transactions during the period under examination.

Last Answer : Includes the preparation of a written report of the CPA's conclusion

Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than (A) 60°C (B) 80°C (C) 100°C (D) 110°C

Description : Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than (A) 60°C (B) 80°C (C) 100°C (D) 110°C

Last Answer : (B) 80°C

1. Who has the final power to maintain order within the House of People ? 2. X210 has half life of 5 day. What is the time taken for seven-eights of sample of X210 to decay? 3. What is Sagar Samrat’? 4. The Appalachian coal fields, one of the important coal fields in the world, are located in which country? 5. Which was the most prominent industry that f1uorished during the Mughal period?

Description : 1. Who has the final power to maintain order within the House of People ? 2. X210 has half life of 5 day. What is the time taken for seven-eights of sample of X210 to decay? 3. What is ... an important condition for growth of coral? 20. Where was the Arya Samaj setup for the first time in 1875 ?

Last Answer : Answer : 1. Speaker 2. 15 days 3. A drilling ship in Bombay High 4. U.S.A. 5. Cotton textiles 6. Bachendri Pal 7. Nodulated root 8. President 9. Chile 10. Nur Jahan 11. 5 12. ... coast 15. Dayanand Saraswati 16. Chloramphenical 17. Lord Ripon 18. Helium nuclear 19. Wave-free salt water 20. Bombay

Define Piezoelectric effect.

Description : Define Piezoelectric effect.

Last Answer : When applying mechanical energy to some type of crystals called piezoelectric crystals the mechanical energy is converted into electrical energy is called piezoelectric effect.

Define non-inverting amplifier?

Description : Define non-inverting amplifier?

Last Answer : The input is applied to the non-inverting input terminal and the inverting terminal connected to the ground.

Define slew rate?

Description : Define slew rate?

Last Answer : Slew rate can be defined as the maximum rate of change of output voltage of op-amp with respect to time.

Define input bias current?

Description : Define input bias current?

Last Answer : It is defined as the average of the currents entering into the input terminals of an op-amp.

Define input offset current?

Description : Define input offset current?

Last Answer : It is defined as the algebraic difference between the current entering the inverting and non-inverting terminal of an op-amp.

Define input offset voltage?

Description : Define input offset voltage?

Last Answer : It is defined as the voltage that must be applied between the input terminals of an op-amp to nullify the output.

Define loading?

Description : Define loading?

Last Answer : A large value of Rc cannot be used in a circuit since,a large value of resistance requires a large chip area.For large Rc, quiescent drop across it increases and hence a large power supply is required ... source can also be used as an active load for an amplifier to obtain a very large voltage gain.

Define current amplification factor?

Description : Define current amplification factor?

Last Answer : It is defined as the ratio of change in output current to the change in input current at constant other side voltage.

Define PIV .

Description : Define PIV .

Last Answer : Peak inverse voltage is the maximum reverse voltage that can be applied to the PN junction without damage to the junction.

Define the term diffusion current?

Description : Define the term diffusion current?

Last Answer : A concentration gradient exists, if the number of either electrons or holes is greater in one region of a semiconductor as compared to the rest of the region. The holes and electron ... concentration. This process in called diffusion and the current produced due this movement is diffusion current.

Define drift current?

Description : Define drift current?

Last Answer : When an electric field is applied across the semiconductor, the holes move towards the negative terminal of the battery and electron move towards the positive terminal of the battery. This drift movement of charge carriers will result in a current termed as drift current.

Define Monostable Multivibrators

Description : Define Monostable Multivibrators

Last Answer : The monostable multivibrator or one –shot requires an external signal called a trigger to force the circuitinto a quasi stable state for a particular time or delay.

Define Astable Multivibrators.

Description : Define Astable Multivibrators.

Last Answer : The astable Multivibrators toggles between one state and the other without the influence of any other external control signal. It is also called as free running multivibrator.

Define Multivibrators. Mention its types.

Description : Define Multivibrators. Mention its types.

Last Answer : Multivibrators are regenerative circuits, Which are mainly used in timing applications. Based on their operational characteristics they can be classified into • Astable Multivibrators • Monostable Multivibrators • Bistable Multivibrators

Define load regulation.

Description : Define load regulation.

Last Answer : Load regulation is defined as the change in output voltage for a change in load current. It is expressed in millivolts or as a percentage of the output voltage. 

Define line regulation.

Description : Define line regulation.

Last Answer : Line regulation is defined as the percentage change in the output voltage for a change in the input voltage.It is expressed in millivolts or as a percentage of the output voltage. 

Define slope overload noise and granular noise.

Description : Define slope overload noise and granular noise.

Last Answer : Slope overload noise is introduced due to the use of a step size delta is too small To follow some portions of the waveform with a step size.   Granular noise results from using a step size that is too large in parts of the waveform having a small slope. 

Define Delta modulation.

Description : Define Delta modulation. 

Last Answer : Delta modulation is a technique in which derivative of the signal is quantized. The delta modulation shows slope overload for fast input signals and their performance is dependent on input signal frequency.

Define Dither.

Description : Define Dither.

Last Answer : It is a very small amount of random noise(white noise) which is added to the input before A/D conversion to improve the performance of A/D converter.

Define quantization error.

Description : Define quantization error.

Last Answer : In A/D converter the smallest digital step is due to the LSB and it can be made smaller only by increasing the number of bits in the digital representation. This error is called quantization error.

Define accuracy of converter.

Description : Define accuracy of converter.

Last Answer : Absolute accuracy: It is the maximum deviation between the actual converter output & the ideal converter output.  Relative accuracy: It is the maximum deviation after gain & offset errors have been removed. ... of a converter is also specified in form of LSB increments or % of full scale voltage.

Define resolution of a data converter.

Description : Define resolution of a data converter.

Last Answer : The resolution of a converter is the smallest change in voltage which may be produced at the output or input of the converter. Resolution (in volts)= VFS/2n-1=1 LSB increment. The resolution of an ADC is defined as the smallest change in analog input for a one bit change at the output.

Define conversion time.

Description : Define conversion time.

Last Answer : conversion time of a successive approximation type ADC is given by  T(n+1)  where T---clock period  Tc---conversion time  n----no. of bits

Define Voltage to Frequency conversion factor.

Description : Define Voltage to Frequency conversion factor. 

Last Answer : Voltage to Frequency conversion factor is defined as,  Kv = fo / Vc= 8fo /Vcc  Vc is the modulation voltage  fo frequency shift

Define free running mode .

Description : Define free running mode .

Last Answer : An interactive computer mode that allows more than one user to have simultaneous use of a program.

Define Pull-in time.

Description : Define Pull-in time.

Last Answer : The total time taken by the PLL to establish lok is called pull-in time.It depends on the initial phase and frequency difference between the two signals as well as on the overall loop gain and loop filter characteristics