Vacuum tubes have been replaced by-----? A. Conductors B. Diodes C. Transistors (Answer) D. None of these

Vacuum tubes have been replaced by-----?

A. Conductors

B. Diodes

C. Transistors (Answer)

D. None of these
by

1 Answer

Answer :

C. Transistors (Answer)
by

Related questions

Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Description : Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Last Answer : Answer: A

In electronic computers, vacuum tubes were replaced by transistors and transistors have been replaced by what device?

Description : In electronic computers, vacuum tubes were replaced by transistors and transistors have been replaced by what device?

Last Answer : Integrated circuits.

Which electronic component was made out of semiconductor material? A) Vacuum tubes B) Transistors C) ICs D) All of above

Description : Which electronic component was made out of semiconductor material? A) Vacuum tubes B) Transistors C) ICs D) All of above

Last Answer : Answer : C

The main electronic component used in first generation computers was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Description : The main electronic component used in first generation computers was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Last Answer : Answer : B

Chief component of first generation computer was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Description : Chief component of first generation computer was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Last Answer : Answer : B

Which of the following statements comparing transistors and vacuum tubes is correct? A. Both transistors and vacuum tubes have a cathode that must be heated to give off electrons. B. A vacuum tube must have a heated cathode, where transistors do not. C. Neither transistors nor vacuum tubes require heat for electrons to flow. D. The anode of both transistors and vacuum tubes must be heated to give off electrons.

Description : Which of the following statements comparing transistors and vacuum tubes is correct? A. Both transistors and vacuum tubes have a cathode that must be heated to give off electrons. B. A vacuum tube must ... flow. D. The anode of both transistors and vacuum tubes must be heated to give off electrons.

Last Answer : Answer: B

Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : Vacuum Tubes and Valves

First generation computer systems used 1) Transistors 2) Vacuum tubes 3) Magnetic cores 4) Silicon chips

Description : First generation computer systems used 1) Transistors 2) Vacuum tubes 3) Magnetic cores 4) Silicon chips

Last Answer : 2) Vacuum tubes

Which electronic component was use in first generation? 1) Vacuum tubes 2) transistors 3) IC chips 4) all above

Description : Which electronic component was use in first generation? 1) Vacuum tubes 2) transistors 3) IC chips 4) all above

Last Answer : 1) Vacuum tubes

Which electronic component was use in first generation? 1 Vacuum tubes 2 transistors 3 IC chips 4 all above

Description : Which electronic component was use in first generation? 1 Vacuum tubes 2 transistors 3 IC chips 4 all above

Last Answer : 1 Vacuum tubes

Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : b. Vacuum Tubes and Valves

Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : b. Vacuum Tubes and Valves

This invention replaced vacuum tubes and made computers much smaller and faster. However, it was eventually replaced by another invention (i) RAM (ii) ENIAC (iii) Transformer (iv) Transistor.

Description : This invention replaced vacuum tubes and made computers much smaller and faster. However, it was eventually replaced by another invention (i) RAM (ii) ENIAC (iii) Transformer (iv) Transistor.

Last Answer : (iv) Transistor.

Which of the devices listed is indicated by the symbols lettered 'A' to 'F', shown in the illustration? EL-0016 A. Diodes B. Linear inductors C. Capacitors D. Transistors

Description : Which of the devices listed is indicated by the symbols lettered 'A' to 'F', shown in the illustration? EL-0016 A. Diodes B. Linear inductors C. Capacitors D. Transistors

Last Answer : Answer: A

Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Description : Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Last Answer : D) All of the above.

High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Description : High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Last Answer : Answer: B

Which of the following was used as circuitry for first generation of computers? (1) Vacuum tube (2) Transistors (3) Integrated circuits (4) Microprocessors

Description : Which of the following was used as circuitry for first generation of computers? (1) Vacuum tube (2) Transistors (3) Integrated circuits (4) Microprocessors

Last Answer : Vacuum tube

Does anybody make vacuum tubes anymore? All I ever find are surplus.

Description : Does anybody make vacuum tubes anymore? All I ever find are surplus.

Last Answer : answer:Without details as to type, there are over 39,000 currently listed on eBay. I’d say they’re still manufactured since there’s also availability on Amazon.

Why vacuum tubes are not preferred at microwave?

Description : Why vacuum tubes are not preferred at microwave?

Last Answer : Actually three special purpose vacuum tubes were specifically designed for microwave usage and are in some cases still the least expensive way to work with high power microwave signals.These ... and the electromagnetic compatibility (EMC) testing industry for immunity testing of electronic devices)

Which of the following is not a feature of first generation computers A) They used vacuum tubes or valves as main electronic component B) They consumed lots of electricity and produced excessive heat C) They used machine language and assembly language to program the machine D) None of above

Description : Which of the following is not a feature of first generation computers A) They used vacuum tubes or valves as main electronic component B) They consumed lots of electricity and produced excessive heat C) They used machine language and assembly language to program the machine D) None of above

Last Answer : Answer : C

First generation computers used for memory A) vacuum tubes B) silicon chips C) magnetic drum D) RAM

Description : First generation computers used for memory A) vacuum tubes B) silicon chips C) magnetic drum D) RAM

Last Answer : Answer : C

Who invented vacuum tubes? A) John Bardeen B) William Shockley C) Lee de Forest D) All of above

Description : Who invented vacuum tubes? A) John Bardeen B) William Shockley C) Lee de Forest D) All of above

Last Answer : Answer : C

What was the main disadvantage of vacuum tubes? A) They were larger in size B) They consumed a lot of electricity C) They produced heat and often burned out D) The operation cost was high

Description : What was the main disadvantage of vacuum tubes? A) They were larger in size B) They consumed a lot of electricity C) They produced heat and often burned out D) The operation cost was high

Last Answer : Answer : C

Why are vacuum tubes also called valves? A) Because they can amplify the weak signals and make them strong B) Because they can stop or allow the flow of current C) Both of above D) None of above

Description : Why are vacuum tubes also called valves? A) Because they can amplify the weak signals and make them strong B) Because they can stop or allow the flow of current C) Both of above D) None of above

Last Answer : Answer : B

First Generation computers used ______ for Circuitry and ________ for memory (A) Transistor and Magnetic Core (B) IC and Magnetic Memory (C) Vacuum tubes and Magnetic drum (D) IC and Magnetic Core

Description : First Generation computers used ______ for Circuitry and ________ for memory (A) Transistor and Magnetic Core (B) IC and Magnetic Memory (C) Vacuum tubes and Magnetic drum (D) IC and Magnetic Core

Last Answer : (C) Vacuum tubes and Magnetic drum

The method used to produce electron emission in most vacuum tubes is known as ____________. A. photoelectric emission B. secondary electric emission C. cold cathodic electric emission D. thermionic emission

Description : The method used to produce electron emission in most vacuum tubes is known as ____________. A. photoelectric emission B. secondary electric emission C. cold cathodic electric emission D. thermionic emission

Last Answer : Answer: D

The HPAs in most satellite are A. TWTs B. Klystrons C. Vacuum tubes D. Magnetrons

Description : The HPAs in most satellite are A. TWTs B. Klystrons C. Vacuum tubes D. Magnetrons

Last Answer : A. TWTs

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

How did vacuum tubes cause a problem for first generation computers

Description : How did vacuum tubes cause a problem for first generation computers

Last Answer : They were unreliable, required a lot of power to run, and produced so much heat that air conditioning was needed to protect computer parts.

When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Description : When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Last Answer : Differences in performance of tubes of the same type

Vacuum tubes are designed to operate in what portion of the Ep - Ip

Description : Vacuum tubes are designed to operate in what portion of the Ep - Ip

Last Answer : The linear portion.

Fifth generation computers do not have : (1) Speech recognition (2) Artificial intelligence (3) Very large scale integration (4) Vacuum tubes

Description : Fifth generation computers do not have : (1) Speech recognition (2) Artificial intelligence (3) Very large scale integration (4) Vacuum tubes 

Last Answer : Vacuum tubes

is Ohms law applicable to vacuum tubes?

Description : is Ohms law applicable to vacuum tubes?

Last Answer : Ohm's law is not applicable to vacuum tubes.

Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Description : Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Last Answer : (d) 2x 1(T7 N/m)

Name this chemical element. The principal use of this element has been in solid-state electronic devices, notably transistors. Its position in the periodic table is in group "4A". The element's atomic number is 32 and its chemical symbol is Ge.

Description : Name this chemical element. The principal use of this element has been in solid-state electronic devices, notably transistors. Its position in the periodic table is in group "4A". The element's atomic number is 32 and its chemical symbol is Ge.

Last Answer : ANSWER: GERMANIUM

Mention the different types of diodes and one use of each.

Description : Mention the different types of diodes and one use of each.

Last Answer : a) Light Emitting Diode (LED): They are used in lighting, display units of electric and electronic devices. b) Zener diode: It is used in voltage stabilizers. c) Photodiode: It is used in light sensitive semiconductors. d) Laser diode: It is used in fiber optical fibre communications.

Should I use diodes?

Description : Should I use diodes?

Last Answer : So you have three camera flashes that are attached to a single capacitor, or three camera flashes attached to different capacitors?

which of the following accurately describes junction diodes? -General Knowledge

Description : which of the following accurately describes junction diodes? -General Knowledge

Last Answer : A semiconductor rectifying device in which the barrier between the two regions of opposite conductivity (n-type and p-type) type produces the rectification: accurately describes junction diodes.

How many types of diodes ?

Description : How many types of diodes ?

Last Answer : 2 types of diodes

Are diodes polarity sensitive?

Description : Are diodes polarity sensitive?

Last Answer : Need answer

For which one of the following, 'Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Description : For which one of the following, 'Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Last Answer : (1) Rectification Explanation: In electronics, a diode is an electronic device that allows current to flow in one direction only. It is mainly used as a rectifier diode that lets ... used for power supply operation. Rectifier diodes are used for changing alternating current into direct current.

For which one of the following, "Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Description : For which one of the following, "Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Last Answer : (1) Rectification Explanation: A rectifier diode is a two-lead semiconductor that allows current to pass in only one direction. Many types of diodes are used for a wide range of applications. Rectifier diodes are a vital component in power supplies

Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Description : Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Last Answer : (4) All of the above Explanation: A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Infrared LEDs are used in remote-control circuits, such as those used with a wide variety of consumer electronics.

A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Description : A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Last Answer : (4) a single transistor Explanation: In digital logic, an inverter or NOT gate is a logic gate which implements logical negation. An inverter circuit outputs a voltage representing the opposite ... be constructed using a single NMOS transistor or a single PMOS transistor coupled with a resistor.

In the illustrated circuit, if the input to leads 'B' and 'Y' was 24 VDC the output between 'A' and 'X' will be _________. EL-0069 A. 24 VDC B. 22.8 VDC, 24 VDC minus the 1.2 VDC voltage drop across two diodes C. undeterminable without knowing the turns ratio of the transformer D. 0 VDC

Description : In the illustrated circuit, if the input to leads 'B' and 'Y' was 24 VDC the output between 'A' and 'X' will be _________. EL-0069 A. 24 VDC B. 22.8 VDC, 24 VDC minus the 1.2 VDC voltage drop across two diodes C. undeterminable without knowing the turns ratio of the transformer D. 0 VDC

Last Answer : Answer: D

Routine maintenance of a ship's service alternator should include ______________. A. changing the pedestal bearing insulation yearly B. megger testing of all rectifying diodes C. lubricating excitation slip rings D. periodic cleaning of the air filters or screens

Description : Routine maintenance of a ship's service alternator should include ______________. A. changing the pedestal bearing insulation yearly B. megger testing of all rectifying diodes C. lubricating excitation slip rings D. periodic cleaning of the air filters or screens

Last Answer : Answer: D

Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Description : Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Last Answer : Answer: D

The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Description : The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Last Answer : Answer: A

What types of inverters require feedback diodes?

Description : What types of inverters require feedback diodes?

Last Answer : VSI with RL load.

Why diodes should be connected in antiparallel with the thyristors in inverter circuits?

Description : Why diodes should be connected in antiparallel with the thyristors in inverter circuits?

Last Answer : For RL loads, load current will not be in phase with load voltage and the diodes connected in antiparallel will allow the current to flow when the main thyristors are turned off. These diodes are called feedback diodes.