The value of Stefan-Boltzmann constant in SI unit is (A) 5.6697 × 10 -8W/m2 .°K4 (B) 0.1714 × 10 -8W/m2 .°K4 (C) 5.6697 × 10 -8kcal/m2 . °K4 (D) 0.1714 × 10 -8kcal/m2 . °K4

The value of Stefan-Boltzmann constant in SI unit is

(A) 5.6697 × 10

-8W/m2

.°K4

(B) 0.1714 × 10

-8W/m2

.°K4

(C) 5.6697 × 10

-8kcal/m2

. °K4

(D) 0.1714 × 10

-8kcal/m2

. °K4


by

1 Answer

Answer :

(A) 5.6697 × 10

-8W/m2

.°K4


by

Related questions

Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of a perfectly black body is unity (D) Value of Stefan-Boltzmann constant is 4.876 × 10 -8 KCal/m2 .hr.°K4

Description : Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of ... unity (D) Value of Stefan-Boltzmann constant is 4.876 10 -8 KCal/m2 .hr.°K4

Last Answer : (A) With change in temperature, the radiant energy emitted by a black body remains unchanged

The thermal radiative flux from a surface of emissivity = 0.4 is 22.68 kW/m2 . The approximate surface temperature (K) is (Stefan-Boltzmann constant = 5.67 × 10 -8 W/m2 .K4 )(A) 1000(B) 727(C) 800(D) 1200

Description : The thermal radiative flux from a surface of emissivity = 0.4 is 22.68 kW/m2 . The approximate surface temperature (K) is (Stefan-Boltzmann constant = 5.67 × 10 -8 W/m2 .K4 ) (A) 1000 (B) 727 (C) 800 (D) 1200

Last Answer : (A) 1000

The Stefan-Boltzmann constant depends on the (A) Medium (B) Temperature (C) Surface (D) None of these

Description : The Stefan-Boltzmann constant depends on the (A) Medium (B) Temperature (C) Surface (D) None of these

Last Answer : (D) None of these

In Fourier's law, the proportionality constant is called the (A) Heat transfer co-efficient (B) Thermal diffusivity (C) Thermal conductivity (D) Stefan-Boltzmann constant

Description : In Fourier's law, the proportionality constant is called the (A) Heat transfer co-efficient (B) Thermal diffusivity (C) Thermal conductivity (D) Stefan-Boltzmann constant

Last Answer : (C) Thermal conductivity

Stefan-Boltzmann law applies to __________ body. (A) Black (B) White (C) Grey (D) Any colour

Description : Stefan-Boltzmann law applies to __________ body. (A) Black (B) White (C) Grey (D) Any colour

Last Answer : (A) Black

Which one gives the monochromatic emissive power for black body radiation? (A) Planck's law (B) Kirchhoff’s law (C) Wien's law (D) Stefan-Boltzmann law

Description : Which one gives the monochromatic emissive power for black body radiation? (A) Planck's law (B) Kirchhoff’s law (C) Wien's law (D) Stefan-Boltzmann law

Last Answer : (A) Planck's law

Stefan-Boltzmann law which describes the radiation heat transfer states that, it is proportional to (where, t = temperature in °C T = absolute temperature in ° K) (A) t 4 (B) T 4 (C) 1/t 4 (D) 1/T 4

Description : Stefan-Boltzmann law which describes the radiation heat transfer states that, it is proportional to (where, t = temperature in °C T = absolute temperature in ° K) (A) t 4 (B) T 4 (C) 1/t 4 (D) 1/T 4

Last Answer : (B) T

The ratio of the total emissive power to the absorptivity for all bodies is same at ther-mal equilibrium". This is __________ law. (A) Kirchoff’s (B) Planck's (C) Wien's displacement (D) Stefan-Boltzmann

Description : The ratio of the total emissive power to the absorptivity for all bodies is same at ther-mal equilibrium". This is __________ law. (A) Kirchoff’s (B) Planck's (C) Wien's displacement (D) Stefan-Boltzmann

Last Answer : (A) Kirchoff’s

What sound intensity corresponds to a sound-intensity level of 50dB? A. 1 x 10-6W/m2 B. 1 x 10-7W/m2 C. 1 x 10-8W/m2 D.1 x 10-5W/m2

Description : What sound intensity corresponds to a sound-intensity level of 50dB? A. 1 x 10-6W/m2 B. 1 x 10-7W/m2 C. 1 x 10-8W/m2 D.1 x 10-5W/m2

Last Answer : B. 1 x 10-7W/m2

What is sometimes known as the “Fourth-power law”?  A. Kirchhoff’s radiation law  B. Newton’s law of cooling  C. Stefan-Boltzmann law  D. Hess’s law

Description : What is sometimes known as the “Fourth-power law”?  A. Kirchhoff’s radiation law  B. Newton’s law of cooling  C. Stefan-Boltzmann law  D. Hess’s law

Last Answer : Stefan-Boltzmann law

State Fourier's law of 'conduction and Stefan Boltzmann law of radiation. Express mathematically.

Description : State Fourier's law of 'conduction and Stefan Boltzmann law of radiation. Express mathematically.

Last Answer : Fourier law of heat conduction- It state that for homogeneous material, the rate heat transfer in steady state in any direction is linearly proportional to temperature gradient in that direction. Q α dt/ ... proportional to fourth power of absolute temperature of the body. E α T4 E= σT4

The unit of conductance in SI unit is (A) W/m (B) W/m2 (C) W/°K (D) W/m°K

Description : The unit of conductance in SI unit is (A) W/m (B) W/m2 (C) W/°K (D) W/m°K

Last Answer : (C) W/°K

The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec

Description : The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec

Last Answer : (A) kg/m. sec

SI unit for the surface tension is ____. (1) kg/m2 (2) kg/m3 (3) N/m (4) kg/m

Description : SI unit for the surface tension is ____. (1) kg/m2 (2) kg/m3 (3) N/m (4) kg/m

Last Answer : (3) N/m Explanation: Surface tension is measured in force per unit length. Its SI unit is Newton per meter.

SI unit of resistivity is a. ohm b. Ohm×m c. Ohm×m-1 d. Ohm×m2

Description : SI unit of resistivity is a. ohm b. Ohm×m c. Ohm×m-1 d. Ohm×m2

Last Answer : c. Ohm×m-1

The unit of Torque in SI units (a) kg-m (b) kg-cm (c) N-m (d) N/m2

Description : The unit of Torque in SI units (a) kg-m (b) kg-cm (c) N-m (d) N/m2

Last Answer : (c) N-m

Gabriel Daniel Fahrenheit was: A. A German Physicist B. Developed the mercury thermometer in 1714 C. Devised temperature scale D. All are correct

Description : Gabriel Daniel Fahrenheit was: A. A German Physicist B. Developed the mercury thermometer in 1714 C. Devised temperature scale D. All are correct

Last Answer : D. All are correct

In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K

Description : In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K

Last Answer : (A) Watt/m.°K

What is Boltzmann Constant ?

Description : What is Boltzmann Constant ?

Last Answer : The ratio of molar gas constant , R and Avogadro number is called Boltzmann constant.

The SI units of permitivity are: (a) N.m/C2(b) C2/N.m2 (c) N.m2/C2(d) N.m/C

Description : The SI units of permitivity are: (a) N.m/C2(b) C2/N.m2 (c) N.m2/C2(d) N.m/C

Last Answer : (b) C2/N.m2

The SI unit of Planck’s constant is a) Joule – Sec-1 b) Joule – Sec-2 c) Joule – Sec d) Joule – Sec2

Description : The SI unit of Planck’s constant is a) Joule – Sec-1 b) Joule – Sec-2 c) Joule – Sec d) Joule – Sec2

Last Answer : c) Joule – Sec

The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Description : The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Last Answer : (A) 500

Surface renewal model of mass transfer was enunciated by (A) Toor and Marcello (B) Fick (C) Danckwerts (D) Stefan

Description : Surface renewal model of mass transfer was enunciated by (A) Toor and Marcello (B) Fick (C) Danckwerts (D) Stefan

Last Answer : (C) Danckwerts

The film penetration model of mass transfer was enunciated by (A) Gilliland (B) Toor and Marcello (C) Stefan (D) Fick

Description : The film penetration model of mass transfer was enunciated by (A) Gilliland (B) Toor and Marcello (C) Stefan (D) Fick

Last Answer : (B) Toor and Marcello

The statement that "maximum wavelength of radiation is inversely proportional to the temperature" is __________ law. (A) Stefan-Boltzmann’s (B) Planck's (C) Wien's displacement (D) None of these

Description : The statement that "maximum wavelength of radiation is inversely proportional to the temperature" is __________ law. (A) Stefan-Boltzmann’s (B) Planck's (C) Wien's displacement (D) None of these

Last Answer : (C) Wien's displacement

What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Description : What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Last Answer : Joule-Thomson coefficient

“The total volume of a mixture of non-reacting gases is equal to the sum of the partial volumes.” This statement is known as ______.  A. Law of Dulong and Petit  B. Maxwell-Boltzmann law  C. Amagat’s law  D. Avogadro’s law

Description : “The total volume of a mixture of non-reacting gases is equal to the sum of the partial volumes.” This statement is known as ______.  A. Law of Dulong and Petit  B. Maxwell-Boltzmann law  C. Amagat’s law  D. Avogadro’s law

Last Answer : Amagat’s law

A thin, flat & square plate measuring 2 m × 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will remain constant at 30°C, if the convective heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Last Answer : (B) 100

5. Unit of surface tension in S.I. unit is (A) Watt/m (B) Joule/m2 (C) Newton/m2 (D) Joule/m

Description : 5. Unit of surface tension in S.I. unit is (A) Watt/m (B) Joule/m2 (C) Newton/m2 (D) Joule/m

Last Answer : Option B

Where can i find and english copy of Stefan Zweig's "World of Yesterday"?

Description : Where can i find and english copy of Stefan Zweig's "World of Yesterday"?

Last Answer : Try http://www.bookfinder.com/

what is the name of the part in the vampire diaries where katherine jumps out of the church and stefan saves her?

Last Answer : S05e08 Dead Man On Campus This is an allusion to the 1998 comedy of the same name about the superstition that if a roommate commits suicide, you will go through the state with honors.

After looking at his data, Stefan focuses his study on understanding why people are behaving as they are. Which research orientation is he using?

Description : After looking at his data, Stefan focuses his study on understanding why people are behaving as they are. Which research orientation is he using?

Last Answer : Interpretive sociology

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C

Description : What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C

Last Answer : (B) Kcal/hr.m.°C

Thermal diffusivity of a material (A) Has the unit m2 /sec (B) Is defined as K/ρ . Cp (C) Is the ratio of thermal conductivity to thermal capacity (D) All (A), (B) and (C)

Description : Thermal diffusivity of a material (A) Has the unit m2 /sec (B) Is defined as K/ρ . Cp (C) Is the ratio of thermal conductivity to thermal capacity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)

Description : Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)

Last Answer : (A) Ton stock/hr/m2 hearth area

. One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Description : . One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Last Answer : (A) 1 cm2 /second

Unit of mass velocity is (A) kg/hr (B) kg/m2 . hr (C) kg/m2 (D) kg/m3 . hr

Description : Unit of mass velocity is (A) kg/hr (B) kg/m2 . hr (C) kg/m2 (D) kg/m3 . hr

Last Answer : (B) kg/m2 . hr

N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke

Description : N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke

Last Answer : (A) The S.I. unit of dynamic viscosity

The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3

Description : The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3

Last Answer : (C) N/m2

One poise (unit of absolute/dynamic viscosity) is equivalent to one (A) gm/cm2 . sec (B) gm/cm. sec (C) cm2 /sec (D) m2 /sec

Description : One poise (unit of absolute/dynamic viscosity) is equivalent to one (A) gm/cm2 . sec (B) gm/cm. sec (C) cm2 /sec (D) m2 /sec

Last Answer : (B) gm/cm. sec

In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/s (B) μ , α and θ all have units of m2/s (C) α and θ have units of m2/s, while μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Description : In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/ ... μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Last Answer : Option C

Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Description : Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Last Answer : (B) 25

What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C