The suitable evaporator for concentration of foaming liquids is a

__________ evaporator.

(A) Long tube

(B) Short tube

(C) Vacuum

(D) Falling film

1 Answer

Answer :

(A) Long tube

Related questions

Description : Agitated film evaporator is suitable for concentrating __________ liquids. (A) Foaming (B) Viscous (C) Very thin (D) Corrosive

Last Answer : (B) Viscous

Description : Which is the most suitable for the concentration of foamy & frothy liquors? (A) Agitated film evaporator (B) Long tube vertical evaporator (C) Open pan evaporator (D) None of these

Last Answer : (B) Long tube vertical evaporator

Description : Fruit juice (a heat sensitive material) can be concentrated in a __________ evaporator. (A) Long tube (B) Falling film (C) High pressure (D) None of these

Last Answer : (B) Falling film

Description : Which of the following is used for the concentration of rubber latex? (A) Agitated film evaporator (B) Long tube vertical evaporator (C) Short tube evaporator (D) Calandria

Last Answer : (A) Agitated film evaporator

Description : In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Last Answer : (C) Foaming of the solution

Description : Forced circulation evaporators are useful for the concentration of viscous, salting and scale forming liquors. Which of the following is a forced circulation evaporator? (A) Long vertical evaporator (B) Horizontal tube evaporator (C) Agitated film evaporator (D) Calandria vertical tube evaporator

Last Answer : (C) Agitated film evaporator

Description : Which is the most suitable for the concert-ration of highly concentrated solution? (A) Open pan evaporation (B) Long tube vertical evaporator (C) Agitated film evaporator (D) None of these

Last Answer : (A) Open pan evaporation

Description : For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Last Answer : (B) Vacuum

Description : In case of a vertical tube evaporator, with increase in the liquor level, the __________ is increased. (A) Velocity of circulation (B) Liquor-film co-efficient (C) Both (A) and (B) (D) Neither (A) and (B)

Last Answer : (D) Neither (A) and (B)

Description : Viscous & heat sensitive liquids are concentrated in __________ evaporators. (A) Open pan (B) Long tube (C) Agitated film (D) None of these

Last Answer : (C) Agitated film

Description : Steam is routed through the tube in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Short tube vertical (D) Long tube vertica

Last Answer : (B) Horizontal tube

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

Description : Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Last Answer : (D) None of these

Description : A __________ evaporator employs an annular downtake. (A) Basket type (B) Horizontal (C) Long tube vertical (D) None of these

Last Answer : (A) Basket type

Description : In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Last Answer : (A) Increases

Description : Write construction and disadvantages of short tube evaporator.

Last Answer : Construction:   It consists of number of tubes which are from 1 to 2 meters in length and from 40- 80 mm in diameter. About 1000 tubes are fitted in a vessel upto 2.5 meter or ... It is quite complicated and expensive in construction. 2. Difficult to clean. 3. Maintenance is costly.

Description : Intermittent tube cleaning is possible to be done in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Calandria (D) None of these

Last Answer : (A) Basket type

Description : Plate efficiency in a distillation column is reduced due to the __________ of liquid. (A) Entrainment (B) Foaming (C) Weeping & dumping (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Even though heat transfer co-efficient in boiling liquids is large, use of fins is advantageous, when the entire surface is exposed to __________ boiling. (A) Film (B) Nucleate (C) Transition (D) All modes of

Last Answer : Option A

Description : The purpose of providing bleed points in the evaporator is to (A) Admit the feed (B) Remove the product (C) Facilitate removal of non-condensable gases (D) Create vacuum

Last Answer : (C) Facilitate removal of non-condensable gases

Description : A dephlegmator is a (A) Total condenser (B) Vacuum evaporator (C) Partial condenser (D) Double pipe heat exchanger

Last Answer : (C) Partial condenser

Description : The purpose of providing a 'catchall' in the vapor line of an evaporator is to (A) Create vacuum (B) Regulate the vapor flow (C) Vent the non-condensable gases (D) Arrest the entrained liquid

Last Answer : (D) Arrest the entrained liquid

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point

Description : Heat sensitive materials can be concentrated in an evaporator employing (A) Vacuum (B) High pressure (C) High residence time (D) None of these

Last Answer : (A) Vacuum

Description : Heat sensitive materials can be concentrated in an evaporator employing (A) Vacuum (B) High pressure (C) High residence time (D) None of these

Last Answer : (A) Vacuum

Description : Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Last Answer : (A) Decreased capacity

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Last Answer : (B) Decreases

Description : In case of a vertical tube evaporator, with increase in the liquor level, the (A) Capacity of the evaporator is decreased (B) Capacity of the evaporator is increased (C) True temperature drop increases (D) Both (B) and (C)

Last Answer : (A) Capacity of the evaporator is decreased

Description : Tubes are held between top and bottom tube sheets in Calandria type evaporator by keeping (A) Both the tube sheets fixed (B) Both the tube sheets floating (C) The top tube sheet floating and bottom tube sheet fixed (D) The top tube sheet fixed and the bottom tube-sheet floating

Last Answer : (A) Both the tube sheets fixed

Description : Which of the following may prove unsuitable for filtering volatile liquids? (A) Pressure filter (B) Gravity filter (C) Centrifugal filter (D) Vacuum filter

Last Answer : (D) Vacuum filter

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Last Answer : (B) Copper

Description : A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Last Answer : (C) Higher steam economy

Description : Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Last Answer : (C) Nickel

Description : Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Last Answer : (B) Vacuum

Description : For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea (C) Sand (D) Rotary vacuum

Last Answer : (C) Sand

Description : The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Last Answer : (B) Sand

Description : Plate efficiency (A) Is a function of the mass transfer between liquid and vapour (B) Increases due to foaming (C) Increases due to liquid entrainment (D) Increases due to weeping and dumping of liquid

Last Answer : (A) Is a function of the mass transfer between liquid and vapour

Description : Deaeration of high pressure boiler feed water is done to reduce (A) Foaming from boilers (B) Its dissolved oxygen content (C) Its silica content (D) Caustic embrittlement

Last Answer : (B) Its dissolved oxygen content

Description : Presence of nitrogen and phosphorous in waste water discharged into lakes and ponds causes (A) Foaming (B) Odour nuisances (C) Undesirable plant growth (D) Turbidity

Last Answer : (C) Undesirable plant growth

Description : What could be a possible cause for sudden foaming in a cooling tower?

Last Answer : Assuming that no other changes have been made, especially to the water treatment chemicals, the most common outcome to this mystery is a leaking heat exchanger. Begin a systematic check of all of ... in the tower. In addition, not all of these components will set off a conductivity alarm

Description : A motor enclosure which protects against falling liquids is classified as ____________. A. waterproof B. drip proof C. spray tight D. spray proof

Last Answer : Answer: B

Description : Air can be cooled and dehumidified by A. circulating chilled water in tube across air flow B. placing evaporator coil across air flow C. spraying chilled water to air D. all of the mentioned

Last Answer : ANSWER : D

Description : What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Last Answer : a. Saturated steam

Description : Small pressure differences in liquids is measured using a/an (A) U-tube manometer (B) Inclined tube manometer (C) Pitot tube (D) None of these

Last Answer : (B) Inclined tube manometer

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids