What would cause a diode to fail?

1 Answer

Answer :

Supply voltage beyond its limit

Related questions

Description : Write the function of freewheeling diode.

Last Answer : Function of Freewheeling Diode (FWD): a) Freewheeling diode is used across inductive loads such as coils, dc motor armature etc. to prevent voltage spikes across these loads when the switching ... current is shifted from switching device, it is turned off easily and regain its blocking ability.

Description : Explain the formation of parasitic BJT and parasitic diode in Power MOSFET. Can parasitic diode be used in same power electronics applications?

Last Answer : Parasitic Diode: The parasitic diode is in between drain and source. The MOSFET structure itself contains parasitic diode or body drain diode. This parasitic diode allows the reverse flow of current when the ... of MOSFET as a BJT collector. Parasitic BJT operates in the cut-off region.

Description : Justify the statement. Antiparallel diode is connected across MOSFET.

Last Answer : In MOSFET current is flow from drain to source but when the load is inductive the current may flow in opposite direction. To avoid the opposite flow of current and to protect MOSFET the antiparallel diode is connected across MOSFET.

Description : Can we use a zener diode as a rectifier?

Last Answer : Yes we can use zener diode as rectifier but it have limitations better to use normal diode. Zener diode have some different applications.

Description : What is the use of Schottky diode?

Last Answer : Schottky diode are use in SMPS, Sample and hold circuits and voltage clamping etc.

Description : What is the use of laser diode?

Last Answer : laser diodes are use in telecommunication, rangefinders, barcode readers etc.

Description : What does a Shockley diode do?

Last Answer : It is diode have low forward voltage drop and very high switching action

Description : What is the use of fast recovery diode?

Last Answer : Fast recovery diode are used in high frequency rectification. Fast recovery diode also used for freewheeling. Fast recovery diode also used for DC to DC converter.

Description : What is the use of Tunnel diode ?

Last Answer : Tunnel diode is use in frequency converters and detectors, ultra high speed switching, amplifiers, etc.

Last Answer : It is semiconductor diode with a low forward voltage drop and very high switching action

Last Answer : PN junction of zener diode is heavily doped than ordinary diode. For the occurrence of Zener effect the zener diode is heavily doped. If the zener diode is not heavily doped then Zener effect ... breakdown voltage is sharp. If the diode is lightly doped the diode will have higher breakdown voltage.

Last Answer : Yes dynamic impedance of zener diode vary.

Last Answer : Yes, Zener diode is a voltage regulator. Zener diode maintain constant reverse Biased Voltage. If the current is varying then also zener diode maintain constant voltage.

Last Answer : Yes it can be, and it will act like a normal PN junction diode. The characteristic of ZENER diode is exactly same as PN junction diode in forward Bias.

Description : Which device use to convert DC to AC?

Last Answer : Rectifier

Description : How does the temperature affect the Zener voltage of a Zener diode?

Last Answer : The Zener voltage of a Zener diode is affected by temperature changes. The Zener voltage of a diode is directly proportional to the temperature. This means that as the temperature increases, the ... is given by the Zener voltage temperature coefficient, which is specified in the diode's datasheet.

Description : Explain Zener Diode.

Last Answer : A Zener diode is a type of semiconductor diode that is designed to operate in the reverse breakdown region of its characteristic curve. Unlike regular diodes, which are designed to conduct ... in surge protectors, power supplies, and other applications where precise voltage regulation is required.

Description : Suggest the diode material suitable to rectify 0.5V AC signal.

Last Answer : The diode material suitable to rectify 0.5V AC signal is silicon

Description : Draw symbols of zener diode and LED.

Last Answer : Symbol of zener diode : Symbol of LED

Description : Diode VI characteristics

Last Answer : Diode VI characteristics

Description : applications of Schottky diode.

Last Answer : 1) To rectify very high frequency signals. 2) As a switching device in digital computers. 3) In clipping & and clamping circuits. 4) In low power schottky TTL circuits. 5) In mixing and detecting circuits used in communication systems. 6) In low voltage power supply circuits.

Description :  applications of P-N junction diode

Last Answer : 1.It is used as rectifier in DC power supply 2.It is used as free wheel diode across relay or inductive load 3.It is used as switch in logic circuits used in computers 4.It is used as detector in demodulation circuits of communication receiver 

Description : Avalanche diode

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : State any two applications of zener diode.

Last Answer : Applications of Zener Diode: i) As a voltage regulator. ii) As a fixed reference voltage provider in transistor biasing circuits. iii) As peak clippers or limiters in wave shaping circuits.

Description : List specification of zener diode

Last Answer : 1. Zener Voltage 2. Maximum Zener current 3. Power dissipation 4. Operating temperature 5. Dynamic Resistance 

Description : Define ripple factor and PIV of diode.

Last Answer : 1. Ripple factor: It is define as ratio of R.M.S. value of AC component to the DC component in the output.  2. PIV : It is maximum reverse voltage that diode can withstand without destroying junction.

Description : Explain the operating principle of LASER and list applications of LASER diode.

Last Answer : A basic construction of Laser diode is as shown . A PN junction is formed by two layers of doped gallium arsenide. There is highly reflective surface at one end of PN junction and ... 6. laser scanning and light beam illumination. 7. Military applications 8. Medical surgery 9.Diamond cutting

Description : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Last Answer : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Description : A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode  

Last Answer : A diode in which the change in reverse bias voltage varies the capacitance is called as Varactor diode

Description : Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

Last Answer : Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

Description : What is a diode clamper circuit?

Last Answer : Tha faction of diode 

Description : What is the use of diode in the circuit?

Last Answer : Diode is a device which allows the flow of current in one direction and blocks the current in opposite direction.

Description : How can you identify a zener diode?

Last Answer : It  conducts  current  in  either  direction.

Description : How do we test a diode?

Last Answer : test

Description : Write short notes on diode.

Last Answer : Diode is made from semiconductor material like silicon or germanium. Diode may use as rectifier which convert AC to DC. It is a electronic component. It is two terminal device, one is anode and second is ... in one direction. Diode is made from P-type and N-type material. Diode have a PN junction.

Description : what is the minimum voltage required to turn on a diode ?

Last Answer : 0.7 v sil and 0.3 v for gr

Description : How much time a diode takes to switch ON in forward bias condition.

Last Answer : t=0 sec.

Description : what is diode ?

Last Answer : Semiconductor device. That allows flow of current in one direction

Last Answer : In Reverse bias of diode when the cathode is connected to positive and anode is connected to negative very small current flows this very small current is known as leakage current of diode.

Last Answer : Diode conducts when the anode voltage is greater than the cathode voltage.

Last Answer : Diode have two terminals.

Description : To turn a UJT ON, the forward bias on emitter diode should be:  1. more than the peak point voltage 2. less than the peak point voltage 3. Equal to the peak point voltage 4. Equal to the stand - off voltage  

Last Answer : To turn a UJT ON, the forward bias on emitter diode should be: more than the peak point voltage 

Description : Can smoking black and mild cause you to fail a nicotine test in urine?

Last Answer : What is the answer ?

Description : What can cause a liver to fail?

Last Answer : The liver can become diseased and fail due to damage from excess alcohol. The liver will also fail if it is full of cancer. There are other causes as well.

Description : Rajasthan receives very little rain because (a) it is too hot (b) there is no water available and thus the winds remain dry (c) the monsoons fail to reach this area (d) the winds do not come across any barrier to cause the necessary uplift to cool the winds

Last Answer : Ans: (d)

Description : The reason for Rajasthan being deficient in rainfall is: (a) the monsoon fail to reach this area (b) it is too hot (c) there is no water available and thus the winds remain dry (d) the winds do not come across any barrier to cause necessary uplift to be cooled

Last Answer : Ans: (d)

Description : A short circuit in the armature of a DC motor will cause the motor to _____________. A. run fast B. hum when energized C. spark at the brushes D. fail to start

Last Answer : Answer: C

Description : Software safety is a ................... activity that focuses on the identification and assessment of potential hazards that may affect software negatively and cause an entire ... monitoring and management (B) Software quality assurance (C) Software cost estimation (D) Defect removal efficiency

Last Answer : (B) Software quality assurance

Description : Software safety is quality assurance activity that focuses on hazards that (A) affect the reliability of a software component (B) may cause an entire system to fail. (C) may result from user input errors. (D) prevent profitable marketing of the final product

Last Answer : (B) may cause an entire system to fail.