Pick out the wrong statement. (A) Cellulose acetate membranes are used in dialysis process (B) Elutriation process refers to when the soluble material is largely concentrated on the surface of an insoluble solid and is simply washed off by the solvent (C) 'Cascade' means a group of stages interconnected so that various streamflow from one to another(D) Zirconia probe is used for the humidity measurement

Pick out the wrong statement.
(A) Cellulose acetate membranes are used in dialysis process
(B) Elutriation process refers to when the soluble material is largely
concentrated on the surface of an insoluble solid and is simply washed off by the
solvent
(C) 'Cascade' means a group of stages interconnected so that various streamflow from one to another
(D) Zirconia probe is used for the humidity measurement
by

1 Answer

Answer :

(D) Zirconia probe is used for the humidity measurement
by

Related questions

The operation involved when the soluble material is largely on the surface of an insoluble solid and is merely washed off by the solvent is called (A) Decoction (B) Percolation (C) Elutriation or elution (D) None of these

Description : The operation involved when the soluble material is largely on the surface of an insoluble solid and is merely washed off by the solvent is called (A) Decoction (B) Percolation (C) Elutriation or elution (D) None of these

Last Answer : (C) Elutriation or elution

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Lipids have the following properties: (A) Insoluble in water and soluble in fat solvent (B) High energy content (C) Structural component of cell membrane (D) All of these

Description : Lipids have the following properties: (A) Insoluble in water and soluble in fat solvent (B) High energy content (C) Structural component of cell membrane (D) All of these

Last Answer : Answer : D

an eutectic system, two elements are completely (A) Soluble in solid state (B) Insoluble in liquid state (C) Insoluble in both solid & liquid state (D) Soluble in liquid state

Description : an eutectic system, two elements are completely (A) Soluble in solid state (B) Insoluble in liquid state (C) Insoluble in both solid & liquid state (D) Soluble in liquid state

Last Answer : Option D

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of materials (C) Size enlargement (opposite of size reduction) is not a mechanical operation (D) A 'dust catcher' is simply an enlargement in a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Description : Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of ... a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Last Answer : (C) Size enlargement (opposite of size reduction) is not a mechanical operation

Pick up the non-inflammable plastic from the following: (A) Cellulose acetate plastics (B) Polyvinyl chloride plastics (C) Phenol formaldehyde plastic (D) Urea formaldehyde plastic

Description : Pick up the non-inflammable plastic from the following: (A) Cellulose acetate plastics (B) Polyvinyl chloride plastics (C) Phenol formaldehyde plastic (D) Urea formaldehyde plastic

Last Answer : Answer: Option B

Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a suitable membrane is called dialysis (C) Freeze drying is used for the drying of fish (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Description : Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a ... is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Last Answer : (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

It is a mesh of interconnected membranes that serve a function involving protein synthesis and transport. (A) Endoplasmic reticulum B) Cytoskeleton (C) Golgi apparatus (D) Both A and B

Description : It is a mesh of interconnected membranes that serve a function involving protein synthesis and transport. (A) Endoplasmic reticulum B) Cytoskeleton (C) Golgi apparatus (D) Both A and B

Last Answer : (A) Endoplasmic reticulum

Solid particles separation based on the difference in their flow velocities through fluids is termed as the (A) Clarification (B) Classification (C) Elutriation (D) Sedimentation

Description : Solid particles separation based on the difference in their flow velocities through fluids is termed as the (A) Clarification (B) Classification (C) Elutriation (D) Sedimentation

Last Answer : (B) Classification

Only two of the following Statements accurately describe what happens in the mouth. 1. 2. 3. 4. Amylase breaks down large starch molecules into smaller maltose molecules. Chewing increases the surface area of food for digestion. Saliva emulsifies fats into smaller droplets. Teeth breakup large insoluble molecules into smaller soluble molecules which statements are correct? (a) 1 and 2 (b) 2 and 3 (c) 3 and 4 (d) 1 and 4

Description : Only two of the following Statements accurately describe what happens in the mouth. 1. 2. 3. 4. Amylase breaks down large starch molecules into smaller maltose molecules. Chewing increases the surface area of food for digestion. Saliva emulsifies ... ? (a) 1 and 2 (b) 2 and 3 (c) 3 and 4 (d) 1 and 4

Last Answer : (a) 1 and 2

Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in phosphate rock which is chemically Ca10 (PO4 )6 (F, Cl, OH) (C) Urea is more hygroscopic than ammonium nitrate (D) Nitrogen fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo

Description : Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in ... fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo

Last Answer : (C) Urea is more hygroscopic than ammonium nitrate

Which of the following is a crystalline solid? a) Copper b) NaCl c) Zirconia d) All of abovee solid? a) Copper b) NaCl c) Zirconia d) All of above

Description : Which of the following is a crystalline solid? a) Copper b) NaCl c) Zirconia d) All of above

Last Answer : d) All of above

Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms of permanganate number (C) Bagasse fibre contains both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Pick out the correct statement. (A) Dialysis process is used for the production of fresh water from brine (B) Electrodialysis is used in the manufacture of NaOH (C) Electrodialysis is used for the refining/purification of petrol (D) Both (B) and (C)

Description : Pick out the correct statement. (A) Dialysis process is used for the production of fresh water from brine (B) Electrodialysis is used in the manufacture of NaOH (C) Electrodialysis is used for the refining/purification of petrol (D) Both (B) and (C)

Last Answer : (B) Electrodialysis is used in the manufacture of NaOH

In the formation of cermets, the ratio of ceramic material to metallic material is usually 80:20. Which of the following is a cermet? (A) Zirconia (B) Alumina (C) Bakelite (D) Tungsten carbi

Description : In the formation of cermets, the ratio of ceramic material to metallic material is usually 80:20. Which of the following is a cermet? (A) Zirconia (B) Alumina (C) Bakelite (D) Tungsten carbi

Last Answer : Option D

Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Description : Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Last Answer : (D) None of these

If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is (A) L/G (B) G/L (C) Always < 1 (D) None of these

Description : If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is (A) L/G (B) G/L (C) Always < 1 (D) None of these

Last Answer : (A) L/G

Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Description : Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases

Last Answer : (D) Decreases as the moisture content of flakes increases

Humidification involves mass transfer between a pure liquid phase and a fixed gas, which is (A) Insoluble in the liquid (B) Soluble in the liquid (C) Non-ideal in nature (D) At a fixed temperature

Description : Humidification involves mass transfer between a pure liquid phase and a fixed gas, which is (A) Insoluble in the liquid (B) Soluble in the liquid (C) Non-ideal in nature (D) At a fixed temperature

Last Answer : (A) Insoluble in the liquid

Viscose rayon is (A) Cellulose nitrate(B) Regenerated cellulose nitrate(C) Regenerated cellulose acetate(D) None of these

Description : Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these

Last Answer : (D) None of these

Cellulose acetate has very high film permeability among all the polymers of the order of 5000 gm/100 m2 . Which of the following polymers has the maximum film elongation (of the order of 100%)? (A) Water impermeable cellophane(B) Polythene(C) Cellulose acetate(D) Teflon

Description : Cellulose acetate has very high film permeability among all the polymers of the order of 5000 gm/100 m2 . Which of the following polymers has the maximum film elongation (of the order of 100%)? (A) Water impermeable cellophane (B) Polythene (C) Cellulose acetate (D) Teflon

Last Answer : (B) Polythene

Automobile steering wheels are normally made of (A) Cellulose acetate(B) Cellulose nitrate(C) PVC(D) High density polythene

Description : Automobile steering wheels are normally made of (A) Cellulose acetate (B) Cellulose nitrate (C) PVC (D) High density polythene

Last Answer : (A) Cellulose acetate

Celluloid is (A) Cellulose acetate (B) Regenerated cellulose (C) Cellulose nitrate (D) Cellulose acetate butyrat

Description : Celluloid is (A) Cellulose acetate (B) Regenerated cellulose (C) Cellulose nitrate (D) Cellulose acetate butyrat

Last Answer : (C) Cellulose nitrate

Viscose rayon is chemically (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Cellulose acetate (D) Regenerated cellulose acetate

Description : Viscose rayon is chemically (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Cellulose acetate (D) Regenerated cellulose acetate

Last Answer : (D) Regenerated cellulose acetate

Celluloid is chemically (A) Cellulose acetate (B) Regenerated cellulose (C) Cellulose nitrate (D) Cellulose acetate butyrate

Description : Celluloid is chemically (A) Cellulose acetate (B) Regenerated cellulose (C) Cellulose nitrate (D) Cellulose acetate butyrate

Last Answer : (C) Cellulose nitrate

Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these

Description : Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these

Last Answer : (D) None of these

In coal washeries, three products namely the valuable product (i.e. clean/washed coal), discarded product (i.e. mineral matter) and an additional concentrated product called __________ is produced. (A) Concentrate (B) Tailing (C) Middling (D) None of these

Description : In coal washeries, three products namely the valuable product (i.e. clean/washed coal), discarded product (i.e. mineral matter) and an additional concentrated product called __________ is produced. (A) Concentrate (B) Tailing (C) Middling (D) None of these

Last Answer : (C) Middling

Pick out the wrong statement. (A) All the nitrogenous fertilisers are not soluble in water (B) A straight fertiliser contains only one nutrient (C) Calcium cyanamide is used as weed killer in onion fields (D) The phosphorous nutrient makes the plant stem stronger and increases its branches

Description : Pick out the wrong statement. (A) All the nitrogenous fertilisers are not soluble in water (B) A straight fertiliser contains only one nutrient (C) Calcium cyanamide is used as weed killer in onion fields (D) The phosphorous nutrient makes the plant stem stronger and increases its branches

Last Answer : (A) All the nitrogenous fertilisers are not soluble in water

Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble in common solvents (C) The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Description : Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble ... (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Last Answer : (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of forced draft cooling tower is reduced by the recirculation of the humid and hot discharged air (C) A natural draft cooling tower is recommended to be used, when the air humidity is low and air temperature is also low (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Description : Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of ... Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Last Answer : (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Description : A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Last Answer : (D) Temperature of the solid

Pick up the correct statement from the following: (A) A graphical representation of spectral reflectance verses the various growth stages of a crop, depicts a phonologic patternB) The changes in the polarisation of the radiation reflected or emitted by an object, is known as polarisation variation (C) The degree of polarisation is a characteristic of the object which helps in the identification of the object (D) All of these

Description : Pick up the correct statement from the following: (A) A graphical representation of spectral reflectance verses the various growth stages of a crop, depicts a phonologic pattern B) The changes in ... characteristic of the object which helps in the identification of the object (D) All of these

Last Answer : Answer: Option D

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

Why are slime molds considered to resemble plants? A.They can photosynthesize B.Theyhave cell walls composed largely of cellulose C.They form a threadlike structure D.They form structures that resemble leaves

Description : Why are slime molds considered to resemble plants? A.They can photosynthesize B.Theyhave cell walls composed largely of cellulose C.They form a threadlike structure D.They form structures that resemble leaves

Last Answer : B.Theyhave cell walls composed largely of cellulose

Why are slime molds considered to resemble plants? A.They can photosynthesize B.Theyhave cell walls composed largely of cellulose C.They form a threadlike structure D.They form structures that resemble leaves

Description : Why are slime molds considered to resemble plants? A.They can photosynthesize B.Theyhave cell walls composed largely of cellulose C.They form a threadlike structure D.They form structures that resemble leaves

Last Answer : Theyhave cell walls composed largely of cellulose