Caustic soda is produced in a mercury cell having anode and cathode
made respectively of moving mercury and
(A) Moving mercury and graphite
(B) Graphite and moving mercury
(C) Moving mercury and carbon
(D) Moving mercury and crimped steel wire

1 Answer

Answer :

(B) Graphite and moving mercury

Related questions

Description : What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Last Answer : (D) Cl2 , H2 & NaOH solution

Description : Mercury electrolytic cells are preferred over diaphragm electrolytic cell (for production of caustic soda), as it (A) Has larger production capacity per unit cell (B) Consumes less power per ton of Cl2 produced (C) Produces high purity (70%) caustic soda directly (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

Description : Which of the following processes does not produce Cl2 as a co-product during the manufacture of caustic soda? (A) Diaphragm electrolytic cell process (B) Mercury electrolytic cell process (C) Lime-soda process (D) None of these

Last Answer : (C) Lime-soda process

Description : Which of the following is the most adverse factor challenging the choice of mercury electrolytic cell process for the production of caustic soda? (A) High cost of mercury (B) High specific gravity of mercury (C) Non-availability of high purity mercury (D) Pollution of water stream by mercury

Last Answer : (D) Pollution of water stream by mercury

Description : Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ... the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Last Answer : (C) The quality of X-rays can be controlled by varying the anode-cathode voltage

Description : Mercury cells for caustic soda manufacture, compared to diaphragm cells (A) Require lower initial investment (B) Require more power (C) Produce lower concentration NaOH (D) None of these

Last Answer : (D) None of these

Description : Caustic soda can be stored in __________ drums. (A) Steel (B) Cast iron (C) Brass (D) Gun metal

Last Answer : (A) Steel

Description : Inverter cell anode and cathode of the…………. cell is used for vehicle (a) Copper electrode zinc (b)Zinc copper (c) Aluminium zinc (d)Nickel Cobalt

Last Answer : (a) Copper electrode zinc

Description : In the common dry cell, the zinc atoms are: w) reduced at the cathode x) oxidized at the cathode y) oxidized at the anode z) reduced at the anode

Last Answer : ANSWER: Y -- OXIDIZED AT THE ANODE

Description : When a spoon is to be electroplated with nickel the spoon is (1) dipped in a nickel sulphate solution (2) made anode and a pure nickel rod, the cathode (3) made cathode and a pure nickel red, the anode (4) coated with nickel sulphate and dried

Last Answer : made cathode and a pure nickel red, the anode

Description : The anode in a dry cell consists of – (1) Copper (2) Zinc (3) Cadmium (4) Graphite

Last Answer : (2) Zinc Explanation: A "dry-cell" battery is essentially comprised of a metal electrode or graphite rod (elemental carbon) surrounded by a moist electrolyte paste enclosed in a metal cylinder. ... for the reduction halfreaction. A thin zinc cylinder serves as the anode and it undergoes oxidation.

Description : The anode in a dry cell consists of (1) Copper (2) Zinc (3) Cadmium (4) Graphite 

Last Answer : Zinc

Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. What is wrong if anode is made of nickel instant

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite ... CO D. Nickel May be affected by high temperature.

Description : Corrosion of a metal occurs at the (a) Anode (b) Cathode (c) Both anode and cathode (d) None of the above

Last Answer : Ans:(a)

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : (1) Copper at eathode and oxygen at anode. Explanation: Copper is deposited at the cathode and is dissolved at the anode. Consequently the concentration of copper ions in solution remains constant. This can be used as a method of purification of copper as only pure copper is deposited at the cathode

Description : In electro-refining, the pure metal is deposited on – (1) vessel (2) electrolyte (3) cathode (4) anode

Last Answer : (3) cathode Explanation: In electro-refining, the anodes consist of unrefined impure metal, and as the current passes through the acidic electrolyte the anodes are corroded into the solution so ... pure metal onto the cathodes. Electrolytic refining is used to extract impurities from crude metals.

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

Description : The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward ... is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Last Answer : Answer: B

Description : The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: A

Description : Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: D

Description : Which of the following statements comparing transistors and vacuum tubes is correct? A. Both transistors and vacuum tubes have a cathode that must be heated to give off electrons. B. A vacuum tube must ... flow. D. The anode of both transistors and vacuum tubes must be heated to give off electrons.

Last Answer : Answer: B

Description : The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: C

Description : The input signal of a travelling wave tube is introduced at A. Cathode B. Anode C. Cathode end of the helix D. Collector end of the helix

Last Answer : C. Cathode end of the helix

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

Description : In electro-refining, the pure metal is deposited on (1) vessel (2) electrolyte (3) cathode (4) anode

Last Answer : cathode

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at cathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : Copper at cathode and oxygen at anode.

Description : Define cathode and anode.

Last Answer : Cathode: The electrode which is connected to the negative terminal (pole) of a battery is called as cathode. It is a negative electrode.  Anode: The electrode which is connected to the positive terminal (pole) of a battery is called as anode. It is a positive electrode. 

Description : It is an unidirectional device that blocks the current flow from cathode to anode   (A) SCR (B) PCR (C) VCR (D) DCR

Last Answer : It is an unidirectional device that blocks the current flow from cathode to anode SCR 

Description : What is the difference between an anode and a cathode?

Last Answer : The anode is positively charged electrode and the cathode is negatively charged electrode.

Description : Do electrons flow from the anode to the cathode?

Last Answer : electrons flow from cathode to anode because the electron has a negative charge and repels from the negatively charged cathode whilst also attracting to the positively charged anode.

Description : Which is the positive terminal anode or cathode?

Last Answer : Anode is positive terminal and cathode is negative terminal.

Description : Is the anode or cathode longer in LED ?

Last Answer : In LED anode terminal is longer and cathode terminal is smaller.

Description : Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Last Answer : (B) Fruit juices, milk & its products and caustic soda solution

Description : Evaporators used in caustic soda recovery and production plant are made of (A) Monel metal (B) Gun metal (C) Wood metal (D) Babbitt metal

Last Answer : (A) Monel metal

Description : The common name for the com-pound having formal NaOH is – (1) Caustic soda (2) Caustic potash (3) Soda ash (4) Sodium hydroxide

Last Answer : (1) Caustic soda Explanation: Sodium hydroxide, also known as lye or caustic soda, has the molecular formula NaOH and is a highly caustic metallic base. It is a white solid available in pellets ... manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner.

Description : The common name for the compound having formal NaOH is (1) Caustic soda (2) Caustic potash (3) Soda ash (4) Sodium hydroxide

Last Answer : Caustic soda

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... of molten aluminium by air D. (a) both (b)

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. The purpose of adding crylite is :

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... . to increase melting point of `Al_(2)O_(3)`

Description : Graphite is used as anode and not diamond. Assign reason. 

Last Answer : Ans. In graphite there are free electrons which helps in electricalconductivity. 

Description : Explain the manufacture of Sodium Hydroxide (Caustic Soda), NaOH by castner kellner cell 

Last Answer : Preperation--Sodium hydroxide is generally prepared commercially by the electrolysis of sodium chloride in Castner-Kellner cell. A brine solution is electrolysed using a mercury cathode and a carbon anode. Sodium ... The amalgam is treated with water to give sodium hydroxide and hydrogen gas.   

Description : The doctor's solution comprises of sodium plumbite in (A) Alcohol (B) Water (C) Aqueous caustic soda (D) Soda ash

Last Answer : (C) Aqueous caustic soda

Description : Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Last Answer : (B) Mercaptans

Description : An ideal material of construction for the storage of 50% caustic soda solution would be (A) Karbate (B) High silicon cast iron (C) Monel (D) None of these

Last Answer : (C) Monel

Description : Platinum and silver are corroded by (A) Caustic soda solution (B) Phosphoric acid (C) Sulphuric acid (10%) (D) None of these

Last Answer : (D) None of these

Description : Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Last Answer : (C) Storage tank for storing brine and caustic soda

Description : Rubber lined pumps can be used to pump (A) Caustic soda (B) Chlorinated brine (C) Hypochlorous acid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Caustic soda is transported in __________ lined containers. (A) Glass (B) Nickel (C) Neoprene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)