Photographic plates are coated with
(A) Silver nitrate
(B) Silver halide
(C) Calcium silicate
(D) Metallic silver

1 Answer

Answer :

(B) Silver halide

Related questions

Description : Photographic plates are coated with (A) Silver nitrate (B) Silver halide (C) Calcium silicate (D) Metallic silver

Last Answer : (B) Silver halide

Description : Function of sodium thiosulphate (hypo) in development of photographic film/plate is to (A) Brighten the faint images (B) Remove metallic silver (C) Convert silver chloride to silver (D) Remove unexposed silver halide

Last Answer : (D) Remove unexposed silver halide

Description : Photographic plates are covered with black paper because (a) the cellulose acetate of the paper must remain fresh (b) sunlight is easily absorbed by black paper and it helps develop the film ... paper prevents contact with light (d) the conversion of silver bromide to metallic silver is essential

Last Answer : Ans:(c)

Description : Which halide is used in making sensitive emulsion on photographic film? (1) Sodium chloride (2) Silver bromide (3) Silver iodide (4) Silver chloride

Last Answer : (2) Silver bromide Explanation: Silver bromide, a soft, paleyellow, water insoluble salt well known for its unusual sensitivity to light. This property has allowed silver halides to become the basis of modern photographic materials.

Description : Silver halides are used in photographic plates because they are (a) Oxidised in air (b) Colourless (c) Easily soluble in a hypo solution (d) Readily reduced by light

Last Answer : Ans:(d)

Description : Silver halides are used in photographic plates because they are - (1) oxidised in air (2) soluble in hyposolution (3) reduced by light (4) totally colourless

Last Answer : (3) reduced by light Explanation: The light-sensitive chemicals used in photographic film and paper are silver halides. Silver halides are used in photographic film and photographic paper, including ... - meaning that it can undergo development which turns the entire crystal into metallic silver.

Description : Silver halides are used in photographic plates because they are (1) oxidised in air (2) soluble in hyposolution (3) reduced by light (4) totally colourless

Last Answer :  reduced by light

Description : A 'breath test' used by traffic police to check drunken driving uses: (1) potassium dichromate-sulphuric acid (2) potassium permanganate-sulphuric acid (3) turmeric on filter paper (4) silica gel coated with silver nitrate

Last Answer : (1) potassium dichromatesulphuric acid Explanation: The main constituent of alcohol is Ethanol and the concentration of ethanol in a sample can be determined by back titration with acidified potassium ... contact with the yellow dichromate-coated crystals, the color changes from yellow to green.

Description : In mirrors the back surface is coated with a thin layer of (1) Mercury (2) Silver (3) Red oxide (4) Silver nitrate

Last Answer : (2) Silver Explanation: In a spherical mirror, one of the two curved surfaces is coated with a thin layer of silver followed by a coating of red lead oxide paint. Thus, one side of the spherical minor is opaque and the other side is a highly polished reflecting surface.

Description : A ‘breath test’ used by traffic police to check drunken driving uses: (1) potassium dichromate-sulphuric acid (2) potassium perma-nganatesulphuric acid (3) turmeric on filter paper (4) silica gel coated with silver nitrate

Last Answer : potassium dichromate-sulphuric acid

Description : In mirrors the back surface is coated with a thin layer of : (1) Mercury (2) Silver (3) Red oxide (4) Silver nitrate

Last Answer : Silver

Description : Photographic films are coated with?

Last Answer : Silver Bromide

Description : X-ray films have an emulsion on one or both sides of a support material. The emulsion contains particles of, A. Silver nitrate crystal B. Metallic silver in gelatine C. Silver bromide in gelatine D. Silver nitrate in gelatine E. Potassium bromide in gelatine

Last Answer : C. Silver bromide in gelatine

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Winch of the following is not true about X-rays? (1) have low penetrating power (2) travel with the speed of light (3) Can be reflected or refracted (4) can affect photographic plates

Last Answer : (1) have low penetrating power Explanation: X-rays and gamma rays are photons, i.e. high-energy light-waves. When emitted by a source, for example, radium or cobalt, located outside the body, they ... they can be used in diagnostic medicine to image human bones or human organs made opaque by a dye.

Description : Which of the following is not true about X-rays? (1) have low penetrating power (2) travel with the speed of light (3) Can be reflected or refracted (4) can affect photographic plates

Last Answer : have low penetrating power

Description : Ammonium nitrate (a fertiliser) is coated with limestone powder to (A) Increase its nitrogen content (B) Cut down its production cost (C) Avoid the risk of explosion (D) Add extra nutrient as fertiliser

Last Answer : (C) Avoid the risk of explosion

Description : Hard disk is coated in both side with A) Magnetic metallic oxide B) Optical metallic oxide C) Carbon layer D) All of the above

Last Answer : Answer : A

Description : Hard disk is coated in both sides with A) Magnetic metallic oxide B) Optical metallic oxide C) Carbon layer D) All of the above

Last Answer : Answer : A

Description : Hard disk is coated in both side above a. Magnetic metallic oxide b. Optical metallic oxide c. Carbon layer d. All of the above

Last Answer : Magnetic metallic oxide

Description : Hard disk is coated in both side above a. Magnetic metallic oxide b. Optical metallic oxide c. Carbon layer d. All of the above

Last Answer : a. Magnetic metallic oxide

Description : The chemical used in developing photographic films is – (1) silver bromide (2) hypo (3) sodium sulphate (4) hydroquinone

Last Answer : (1) silver bromide Explanation: Tritium is a radioactive isotope of hydrogen. It is the lightest radioactive element.

Description : The chemical used in developing photographic films is (1) silver bromide (2) hypo (3) sodium sulphate (4) hydroquinone

Last Answer : silver bromide

Description : What does the fixing solution in developing X rays do: A. Removes unexposed silver halide crystals B. Removes exposed silver halide C. Fixes the developed film

Last Answer : A. Removes unexposed silver halide crystals

Description : Which halide is used in making sensitive emulsion on photograhic film? (1) Sodium chloride (2) Silver bromide (3) Silver iodide (4) Silver chloride

Last Answer :  Silver bromide 

Description : The most common filter aid is (A) Diatomaceous earth (B) Calcium silicate (C) Sodium carbonate (D) Silica gel

Last Answer : (A) Diatomaceous earth

Description : Heating of __________ to 120°C, produces plaster of paris. (A) Blue vitriol (B) Gypsum (C) Calcium silicate (D) Calcium sulphate

Last Answer : (B) Gypsum

Description : Main constituents of Portland cement are calcium aluminate and (A) Gypsum (B) Silicates (C) Sodium silicate (D) Carbonates

Last Answer : (B) Silicates

Description : __________ is the major constituent of the Portland cement. (A) Calcium carbonate (B) Calcium oxide (C) Tricalcium silicate (D) Calcium sulphate

Last Answer : (C) Tricalcium silicate

Description : Finely ground calcium aluminate & silicate is a/an (A) Cermet (B) Cement (C) Abrasive (D) Explosive

Last Answer : (B) Cement

Description : furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

Last Answer : Option C

Description : A metal is exposed to the atmosphere for some time. It becomes coated with green carbonate. The metal must be – (1) silver (2) copper (3) aluminium (4) zinc

Last Answer : (2) copper Explanation: Copper forms a rich variety of compounds with oxidation states +1 and +2, which are often called cuprous and cupric, respectively. It does not react with water, but it ... contrast to the oxidation of iron by wet air, this oxide layer stops the further, bulk corrosion.

Description : For transformation, micro-particles coated with DNA to be bombarded with gene gun are made up of (a) silver or platinum (b) platinum or zinc (c) silicon or platinum (d) gold or tungsten.

Last Answer : (d) gold or tungsten.

Description : For transfomation, micro-particles coated with DNA to be bombarded with gene gun are made up of (1) Gold or Tungsten (2) Silver or Platinum (3) Platinum or Zinc (4) Silicon or Platinum

Last Answer : (1) Gold or Tungsten

Description : A metal is exposed to the atmosphere for sometime. It becomes coated with green carbonate. The metal must be (1) silver (2) copper (3) aluminium(4) zinc

Last Answer : copper

Description : A well collimated parallel pencil of cathode rays falls through a potential difference `3kV` & enters the spacing between two parallel metallic plates

Last Answer : A well collimated parallel pencil of cathode rays falls through a potential difference `3kV` & enters the ... Given the length of the plates is 10 cm.

Description : What is the sign of calcium silicate ?

Last Answer : : The signal of calcium silicate is CaSiO3

Description : The chemical name of quartz is (a) Calcium oxide (b) Calcium phosphate (c) Sodium phosphate (d) Sodium silicate

Last Answer : Ans:(d)

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Description : Quartz is made of – (1) Calcium Sulphate (2) Calcium Silicate (3) Sodium Sulphate (4) Sodium Silicate

Last Answer : (4) Sodium Silicate Explanation: Quartz is an abundant mineral in the Earth's continental crust. It is made tip of a continuous framework of SiO4 silicon-oxygen tetrahedra, wit Ii each oxygen being shared between two tetrahedra, giving an overall formula SiO2.

Description : The chemical name or Quartz is – (1) Calcium oxide (2) Calcium phosphate (3) Sodium phosphate (4) Sodium silicate

Last Answer : (4) Sodium silicate Explanation: Quartz is a compound of one part silicon and two parts of oxygen, silicon dioxide, SiO2. Quartz is the most abundant silica mineral. It is used in a ... silicon alloys, etc. The various grades of sodium silicate are characterized by their SiO2:Na2O weight ratio.

Description : Glass is mainly composed of - (1) Sodium silicate (2) Calcium carbonate (3) Calcium hydroxide (4) Sodium bicarbonate

Last Answer : (1) Sodium silicate Explanation: Glass is made from silica (SiO₂) and soda lime, which react to form sodium silicate.

Description : Sodium calcium silicate is called _______. (1) Hard glass (2) Borosilicate glass (3) Soft glass (4) Jena glass

Last Answer : (3) Soft glass Explanation: Ordinary glass which is also known as soda glass or soft glass is a mixture of sodium silicate, Calcium silicate, and Silica.

Description : Slag is a name given for - (1) molten iron (2) molten sand (3) molten alumina (4) molten calcium silicate

Last Answer : (3) molten alumina Explanation: Slag is a partially vitreous byproduct of the process of smelting ore, which separates the desired metal fraction from the unwanted fraction. A good example is steelmaking ... separated from the metal, and assist in the removal of sulfur and phosphorus from the steel.

Description : Mixture of sodium silicate and calcium silicate is called

Last Answer : glass.

Description : The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Last Answer : (A) Gypsum

Description : Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Last Answer : Answer: Option B

Description : The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Description : Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Description : The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Last Answer : Answer: Option B