Which of the following crushing laws is most accurately applicable to
the fine grinding of materials?
(A) Bond's crushing law
(B) Kick's law
(C) Rittinger's law
(D) None of these

1 Answer

Answer :

(C) Rittinger's law

Related questions

Description : The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Description : Which of the following gives the work required for size reduction of coal to -200 mesh in a ball mill most accurately? (A) Rittinger's law (B) Kick's law (C) Bond's law (D) None of these

Last Answer : (A) Rittinger's law

Description : Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a ... ) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Last Answer : (C) Work required in crushing is proportional to the new surface created

Description : . Which of the following equations is Rittinger's crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, Ds̅a & D̅sb = volume surface mean diameter of feed & product respectively.) (A) P/m = K/ ... K . ln D̅sa /D̅sb (C) P/m = K . (1/ D̅sb - 1/Ds̅a ) (D) None of these

Last Answer : (C) P/m = K . (1/ D̅sb - 1/Ds̅a )

Description : For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to (A) The new surface created (B) The size reduction ratio (C) The change in volume due to crushing (D) None of these

Last Answer : (A) The new surface created

Description : Which of the following gives the crushing energy required to create new surface ? (A) Taggarts rule (B) Fick's law (C) Rittinger's Law (D) None of these

Last Answer : (C) Rittinger's Law

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

Description : Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Last Answer : (C) Fine grinding

Description : Pick out the wrong statement. (A) For the compressible cake, voidage & the specific resistance of the cake can be assumed to be constant (B) Cake resistance is independent of the pressure ... Crushing of explosive materials are done by employing dry-grinding (D) Gyratory crusher is a coarse crusher

Last Answer : (B) Cake resistance is independent of the pressure drop

Description : Rittinger's number designates the new surface created per unit mechanical energy absorbed by the material being crushed. Larger value of Rittinger's number of a material indicates its (A) Easier grindability (B) Poor grindability (C) High power consumption in grinding (D) None of these

Last Answer : (A) Easier grindability

Description : The work index in Bond's law for crushing of solids has the following dimensions (A) No units (dimensionless) (B) kWh/ton (C) kW/ton (D) kWh.m1/2 /ton

Last Answer : (B) kWh/ton

Description : General crushing equation is given by d(P/m) = -K (dD̅S /D̅ n S ). Bond's crushing law is obtained by solving this equation for n = __________ and feed of infinite size. (A) 1 (B) 1.5 (C) 2 (D) 2.5

Last Answer : (B) 1.5

Description : For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a (A) Buhrstone mill (B) Ball mill (C) Crushing rolls (D) Hammer mill

Last Answer : (A) Buhrstone mill

Description : A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra-grinding (D) Crushing

Last Answer : (C) Ultra-grinding

Description : A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra grinding (D) Crushing

Last Answer : (C) Ultra grinding

Description : . Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Last Answer : (A) kW. sec/kg

Description : Gravity stamp mill is meant for the __________ crushing. (A) Primary (B) Intermediate (C) Fine (D) Ultrafine

Last Answer : (C) Fine

Description : In a size reduction crushing operation, the feed size is 10 to 50 mm, while the product size is 2 to 10 mm. This is a case of __________ crushing. (A) Primary (B) Secondary (C) Fine

Last Answer : (C) Fine

Description : In a size reduction crushing operation, feed size is 100 to 300 mm. while the product size is 10 to 50 mm. This is a case of the __________ crushing. (A) Primary (B) Secondary (C) Fine (D) Ultrafine

Last Answer : (B) Secondary

Description : In a size reduction crushing operation, feed size is 300 to 1500 mm while the product size is 100 to 300 mm. This is a case of the __________ crushing. (A) Secondary (B) Fine (C) Primary (D) Ultrafine

Last Answer : (C) Primary

Description : Which of the following laws is applicable for the behavior of a perfect gas  (a) Boyle’s law  (b) Charles’law  (c) Gay-Lussac law  (d) all of the above  (e) Joule’s law.

Last Answer : Answer : d

Description : Colloidal mills are used for __________ grinding. (A) Coarse (B) Intermediate (C) Fine (D) Ultrafine

Last Answer : (D) Ultrafine

Description : Efficient burning of anthracite coal requires (A) Low preheat of air (B) Fine grinding (C) High excess air (D) All (A), (B) and (C)

Last Answer : (B) Fine grinding

Description : Curie-Weiss law is applicable to which of the following materials? a) Piezoelectric b) Ferroelectric c) Pyroelectric d) Anti-ferroelectric

Last Answer : b) Ferroelectric

Description : Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Last Answer : Answer: D

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed

Description : Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of ... a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Last Answer : (C) Size enlargement (opposite of size reduction) is not a mechanical operation

Description : Which of the following is used for primary crushing of very hard lumpy materials? (A) Toothed roll crusher (B) Gyratory crusher

Last Answer : (B) Gyratory crusher

Description : Pick out the material having minimum Rittinger's number. (A) Calcite (B) Pyrite (C) Quartz (D) Galena

Last Answer : (C) Quartz

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Description : Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Description : For grinding of softer materials, the grinding wheel should have __________ grain size. (A) Finer (B) Coarser (C) Medium (D) Any type of

Last Answer : (B) Coarser

Description : A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Last Answer : A) Ductile material

Description : hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide

Last Answer : Option C

Description : Which brief statement most accurately describes why alkenes react the way they do? (a) C=C double bonds are weak. (b) A π bond is lost but a stronger σ bond is gained. (c) C=C double bonds are unstable. (d) C=C π bonds are attacked by nucleophiles.

Last Answer : A π bond is lost but a stronger σ bond is gained.

Description : Which of the following materials is recommended for finishing the slip rings after grinding or turning? A. grade 00 sandpaper B. canvas wiper C. crocus cloth D. smooth file

Last Answer : Answer: C

Description : According to Bond crushing law, the work required to form particle of size 'D' from very large feed is (where (S/V)p and (S/V) f are surface to volume ratio of the product and feed respectively). (A) (S/V)p (B) √(S/V)p (C) (S/V) 2 p (D) (S/V) f

Last Answer : (B) √(S/V)

Description : Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers ( ... (D) States that the work required for the crushing is proportional to the new surface created

Last Answer : (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law

Description : What is the responsibility of an auditor who is engaged to audit the financial statements of a government entity? a. Assess control risk with respect to each component of internal ... the statements are free of material misstatements resulting from illegal acts having direct or indirect effects

Last Answer : Obtain an understanding of the possible financial statement effects of laws and regulations having direct and material effects on amounts reported.

Description : Which of the following can be regarded as gas so that gas laws could be applicable, within the commonly encountered temperature limits.  (a) 02, N2, steam, C02  (b) Oz, N2, water vapour  (c) S02, NH3, C02, moisture  (d) 02, N2, H2, air  (e) steam vapours, H2, C02.

Last Answer : Answer : d

Description : Batching refers to (A) Controlling the total quantity at each batch (B) Weighing accurately, the quantity of each material for a job before mixing (C) Controlling the quantity of each material ... be added in each batch according to the moisture content of the materials being mixed in the batch

Last Answer : (C) Controlling the quantity of each material into each batch

Description : Where should you move when Global Warming really kicks into high gear?

Last Answer : answer:Disclaimerl; I live an hour north of Poughkeepsie. Once you get out of the city limits, the area is really nice, all things considered. However two nights ago we had a frost; on Friday we're expecting ... it is. I am staying put and hoping that I will say Adieu before things get too bad.

Description : Break out the Brill Cream, press your slickest suit, and spit-shine those kicks to a high luster - it's time to wish another jelly Happy 10K!

Last Answer : Hey, congrats man….....You know ya gotta save some for the shoe shine boy! :¬)

Description : Does american idol get their kicks-off?

Last Answer : i'm one of the households who watches evening TV. if they rated my viewing, they'd see us doing homework with the kids and feeding them, on the internet and WII-ing. much of the background ... distant from american idol. question is, is anybody really watching this year. american idol is dying.

Description : Riis wrote, "kicks and cuffs are their daily diet. They have little else." What was he describing?

Last Answer : The abuses in children

Description : What are some defensive kicks in soccer?

Last Answer : Attack block and goal-to-ball kick.

Description : two soccer players kick the same 2-kg ball at the same time in opposite directions One kicks with a force of 15N the other kicks with a force of 5N. what is the resulting acceleration of the ball, in m/s2?

Last Answer : 5

Description : A little girl kicks a soccer ball. It goes 10 feet and comes back to her. How is this possible?

Last Answer : Ever heard of gravity? She kicked it up.

Description : When using a megohmmeter to test the dielectric strength of wire insulation, a continuous series of slight downscale kicks by the pointer is result of ____________. A. good insulation B. the ... dirty insulation C. the capacitance of the windings D. the dielectric-absorption effect of the insulation

Last Answer : Answer: B

Description : When using a megohmmeter to test insulation, good insulation will be indicated by _____________. A. slight kicks of the needle down scale B. a downward dip followed by a gradual climb to the true resistance ... C. a gradual rise in the pointer reading at the outset D. the initial dip of the pointer

Last Answer : Answer: B