Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Solvent deoiling process is used for separating oil and soft wax from
hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two
commonly used deoiling solvents. Use of former as the deoiling solvent has
the advantages of the
(A) Elimination of solvent drying facility
(B) Higher nitration temperature
(C) Lower solvent dilution ratio
(D) All (A), (B) & (C)
by

1 Answer

Answer :

(D) All (A), (B) & (C)
by

Related questions

Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Description : Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Last Answer : (C) Propane

Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Last Answer : (C) Aqueous solution (10% water) of diethylene glycol

The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Description : The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Last Answer : (C) Benzol and ethylene dichloride

Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Description : Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Last Answer : (A) Methyl-ethyl-ketone (MEK)

Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Description : Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Description : The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Last Answer : (D) Carbon dioxide

Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Description : Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Last Answer : (A) Hexane

Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C

Description : Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C

Last Answer : (D) Both (B) & (C

Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Description : Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Last Answer : (B) Propane

The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Description : The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Last Answer : (B) Methyl ethyl ketone

. __________ is not an important refinery process for upgrading the quality of lubricating oil.(A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Description : . __________ is not an important refinery process for upgrading the quality of lubricating oil. (A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Last Answer : (A) Deoiling

Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Last Answer : (A) Methyl alcohol

Lecithins are soluble in ordinary solvents except (A) Benzene (B) Ethyl alcohol (C) Methyl alcohol (D) Acetone

Description : Lecithins are soluble in ordinary solvents except (A) Benzene (B) Ethyl alcohol (C) Methyl alcohol (D) Acetone

Last Answer : Answer : D

Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Description : Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Last Answer : (B) Lower octane number

Wood spirit is – (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Description : Wood spirit is – (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Last Answer : (1) Methyl alcohol Explanation: Methanol is also known as methyl alcohol, wood alcohol, wood naphtha or wood spirits. It acquired the name "wood alcohol" because it was once produced ... is produced in a catalytic industrial process directly from carbon monoxide, carbon dioxide, and hydrogen.

lodex, a pain relief balm, has the smell of _______. (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Description : lodex, a pain relief balm, has the smell of _______. (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Last Answer : (1) Methyl salicylate Explanation: Iodex has the characteristic odour of Methyl salicylate, an organic ester naturally produced by many species of plants, particularly wintergreens. It is used in high ... as a rubefacient and analgesic in deep heating liniments to treat joint and muscular pain.

Which compound reacts most rapidly by an SN1 mechanism? (a) Methyl chloride(b) Isopropyl chloride(c) Ethyl chloride(d) tert-Butyl chloride

Description : Which compound reacts most rapidly by an SN1 mechanism? (a) Methyl chloride (b) Isopropyl chloride (c) Ethyl chloride (d) tert-Butyl chloride

Last Answer : tert-Butyl chloride

The most suitable chemical which can be applied to the water surface for reducing evaporation is (A) Methyl alcohol (B) Ethyl alcohol (C) Cetyl alcohol (D) Butyl alcohol

Description : The most suitable chemical which can be applied to the water surface for reducing evaporation is (A) Methyl alcohol (B) Ethyl alcohol (C) Cetyl alcohol (D) Butyl alcohol

Last Answer : Answer: Option C

Iodex, a pain relief balm, has the smell of __________ . (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Description : Iodex, a pain relief balm, has the smell of __________ . (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Last Answer : Methyl salicylate

Wood spirit is (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Description : Wood spirit is (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Last Answer : Methyl alcohol

Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Description : Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Last Answer : (B) Butyl alcohol

What is different between methyl ethyl ketone and paint thinner?

Description : What is different between methyl ethyl ketone and paint thinner?

Last Answer : paint thinner is any solvent used either to thin paint or cleanup after finishing painting, typically a mixture of organic solvents with mineral spirits being a major componentmethyl ethyl ketone is an ... be a component in a given brand of paint thinner, also available as a separate product

When ethyl acetoacetate is subjected to ketonic hydrolysis, the ketoneobtained is(a) Dimethyl ketone(b) Methyl ethyl ketone(c) Diethyl ketone(d) Methyl n-propyl ketone

Description : When ethyl acetoacetate is subjected to ketonic hydrolysis, the ketone obtained is (a) Dimethyl ketone (b) Methyl ethyl ketone (c) Diethyl ketone (d) Methyl n-propyl ketone

Last Answer : Diethyl ketone

The two reference fuel used for cetane rating are (a) Cetane and iso octane (b) Cetane and tetra ethyl lead (c) Cetance and n-heptane (d) Cetane and α- methyl naphthalene

Description : The two reference fuel used for cetane rating are (a) Cetane and iso octane (b) Cetane and tetra ethyl lead (c) Cetance and n-heptane (d) Cetane and α- methyl naphthalene

Last Answer : Ans : d

Which of the herbicide (ai) requiring higher amount for a unit area to be sprayed a). Bispyribac-sodium b). Butachlor c). Cyhalofop-butyl d). Pyrazosulfuron-ethyl

Description : Which of the herbicide (ai) requiring higher amount for a unit area to be sprayed a). Bispyribac-sodium b). Butachlor c). Cyhalofop-butyl d). Pyrazosulfuron-ethyl

Last Answer : b). Butachlor

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Refrigerants commonly used for domestic refrigerators are (A) Ethyl chloride or methyl chloride (B) Freon-12 (C) Propane (D) NH3 or CO2

Description : Refrigerants commonly used for domestic refrigerators are (A) Ethyl chloride or methyl chloride (B) Freon-12 (C) Propane (D) NH3 or CO2

Last Answer : (A) Ethyl chloride or methyl chloride

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Ethyl alcohol is commonly made unfit for drinking by the addition of (a) potassium cyanide (b) methyl alcohol (c) chloroform (d) potassium chloride

Description : Ethyl alcohol is commonly made unfit for drinking by the addition of (a) potassium cyanide (b) methyl alcohol (c) chloroform (d) potassium chloride

Last Answer : Ans:(b)

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Description : Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Last Answer : (B) Employs two solvents

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these

Description : Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these

Last Answer : (D) None of these

. In industrial nomenclature, alcohol means (A) Butyl alcohol (B) Propyl alcoho(C) Ethanol(D) Methyl alcohol

Description : . In industrial nomenclature, alcohol means (A) Butyl alcohol (B) Propyl alcoho (C) Ethanol (D) Methyl alcohol

Last Answer : (C) Ethanol

Assertion(A): Ethyl alcohol is soluble in organic solvents Reason (R): Ethyl alcohol is having non polar ethyl group

Description : Assertion(A): Ethyl alcohol is soluble in organic solvents Reason (R): Ethyl alcohol is having non polar ethyl group

Last Answer : Assertion(A): Ethyl alcohol is soluble in organic solvents Reason (R): Ethyl alcohol is having non polar ... is false D. A is false but R is true

Assertion (A): Ethyl alcohol is soluble in organic solvents Reason(R): Calcium chloride can form an addition compound with ethyl alcohol

Description : Assertion (A): Ethyl alcohol is soluble in organic solvents Reason(R): Calcium chloride can form an addition compound with ethyl alcohol

Last Answer : Assertion (A): Ethyl alcohol is soluble in organic solvents Reason(R): Calcium chloride can form an addition ... is false D. A is false but R is true

Waxes contain higher alcohols named as (A) Methyl (B) Ethyl (C) Phytyl (D) Cetyl

Description : Waxes contain higher alcohols named as (A) Methyl (B) Ethyl (C) Phytyl (D) Cetyl

Last Answer : Answer : D

Higher alcohol present in waxes is (A) Benzyl (B) Methyl (C) Ethyl (D) Cetyl

Description : Higher alcohol present in waxes is (A) Benzyl (B) Methyl (C) Ethyl (D) Cetyl

Last Answer : Answer : D

Oils and fats are (a) Glyceryl esters of higher fatty acids (b) Acetyl esters of higher fatty acids (c) Ethyl esters of fatty acids (d) Methyl esters of fatty acids

Description : Oils and fats are (a) Glyceryl esters of higher fatty acids (b) Acetyl esters of higher fatty acids (c) Ethyl esters of fatty acids (d) Methyl esters of fatty acids

Last Answer : Ans:(a)

Which of the following describes the side chain of Leucine? (a) ethyl group (b) isopropyl group (c) sec-butyl group (d) isobutyl group

Description : Which of the following describes the side chain of Leucine? (a) ethyl group (b) isopropyl group (c) sec-butyl group (d) isobutyl group

Last Answer : isobutyl group

(A) Tertiary butyl carbonion is more stable than methyl carbanion. (R) `+I` effect of the three methyl groups in tertiary butyl carbanion tends to mak

Description : (A) Tertiary butyl carbonion is more stable than methyl carbanion. (R) `+I` effect of the three methyl groups in tertiary butyl carbanion tends to mak

Last Answer : (A) Tertiary butyl carbonion is more stable than methyl carbanion. (R) `+I` effect of the three methyl ... IF (A) is incorrect but (R) is correct.

Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Description : Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Last Answer : (B) Paraffins have lower smoke point than aromatics

Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel oils is higher than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Description : Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel ... than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Last Answer : (C) Light paraffinic fuel oils is higher than that of equivalent olefins

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

Which of the following is the most commonly used leaching solvent in vegetable oil industry? (A) Phenol (B) Hexane

Description : Which of the following is the most commonly used leaching solvent in vegetable oil industry? (A) Phenol (B) Hexane

Last Answer : (B) Hexane

Relative to the pure solvent, the boiling point of a solution is: w) higher x) lower y) at the same temperature

Description : Relative to the pure solvent, the boiling point of a solution is: w) higher x) lower y) at the same temperature

Last Answer : ANSWER: W -- HIGHER