Complete removal of __________ from gasoline is done by Unisol
process using caustic soda and methyl alcohol.
(A) Waxes
(B) Mercaptans
(C) Asphalt
(D) Diolefins

1 Answer

Answer :

(B) Mercaptans

Related questions

Description : Mercapsol and Unisol processes are meant for the (A) Dearomatization of kerosene (B) Removal of mercaptans (C) Dewaxing

Last Answer : (B) Removal of mercaptan

Description : Higher alcohol present in waxes is (A) Benzyl (B) Methyl (C) Ethyl (D) Cetyl

Last Answer : Answer : D

Description : Which of the following is a bleaching agent added in the detergents to facilitate removal of stains caused due to blood, tea etc? (A) Sodium silicate (B) Sodium borate (C) Sodium tripolyphosphate (STPP) (D) Caustic soda

Last Answer : (B) Sodium borate

Description : The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Last Answer : (C) Diesel oil

Description : The doctor's solution comprises of sodium plumbite in (A) Alcohol (B) Water (C) Aqueous caustic soda (D) Soda ash

Last Answer : (C) Aqueous caustic soda

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

Description : Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Last Answer : (A) Aromatics

Description : Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Last Answer : (C) Mercaptans

Description : Soap is prepared by boiling caustic soda with – (1) Alcohol (2) Kerosene oil (3) Glycerine (4) Fats

Last Answer : (4) Fats Explanation: The most basic kind of soap is made from cuastic soda and animal fat. The two are heated together, and then cooled. The process is called "saponification". In technical ... hydrolysis of triglyeerides which are esters of fatty acids, to form the sodium salt, of a carboxylate.

Description : Soap is prepared by boiling caustic soda with (1) Alcohol (2) Kerosene oil (3) Glycerine (4) Fats

Last Answer : Fats

Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Last Answer : (A) Methyl alcohol

Description : Pick out the correct statement: (A) Removal of iron from ceramic material is necessitated (by magnetic separation method) so as to avoid discolouration of ceramic products (B) The operating cost of ... upon the specific gravity of the minerals (D) Asphalt is best crushed using toothed roll crusher

Last Answer : (A) Removal of iron from ceramic material is necessitated (by magnetic separation method) so as to avoid discolouration of ceramic products

Description : Solution used in Doctor's treatment for the removal of mercaptans is (A) Sodium hydroxide (B) Sodium plumbite (C) Cupric chloride (D) Potassium isobutyrate

Last Answer : (B) Sodium plumbite

Description : Caustic soda can be stored in __________ drums. (A) Steel (B) Cast iron (C) Brass (D) Gun metal

Last Answer : (A) Steel

Description : Caustic soda is transported in __________ lined containers. (A) Glass (B) Nickel (C) Neoprene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Last Answer : (D) Screw

Description : Waxes contain higher alcohols named as (A) Methyl (B) Ethyl (C) Phytyl (D) Cetyl

Last Answer : Answer : D

Description : In solutizer sweetening process, solutizer solution used is (A) Methanol in Unisol process (B) Naphthenic acid in Mercapsol process (C) Both (A) and (B)

Last Answer : (C) Both (A) and (B)

Description : A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Last Answer : (B) 24000

Description : Le-Blanc process is a primitive process for the manufacture of (A) Caustic soda (B) Soda ash (C) Bromine from sea water (D) Hydrochloric acid

Last Answer : (B) Soda ash

Description : Which of the following processes does not produce Cl2 as a co-product during the manufacture of caustic soda? (A) Diaphragm electrolytic cell process (B) Mercury electrolytic cell process (C) Lime-soda process (D) None of these

Last Answer : (C) Lime-soda process

Description : Which of the following is the most adverse factor challenging the choice of mercury electrolytic cell process for the production of caustic soda? (A) High cost of mercury (B) High specific gravity of mercury (C) Non-availability of high purity mercury (D) Pollution of water stream by mercury

Last Answer : (D) Pollution of water stream by mercury

Description : Solvay process is used for the manufacture of (A) Caustic soda (B) Soda ash (C) Caustic potash (D) Soda lime

Last Answer : (B) Soda ash

Description : In Kraft process of paper manufacture, white cooking liquor consists of caustic soda (A) Sodium sulphide & sodium carbonate (B) Sodium sulphite & sodium carbonate (C) Sodium sulphite & sodium sulphide (D) None of these

Last Answer : (A) Sodium sulphide & sodium carbonate

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Description : _______ is one of the product formed during refining of petroleum which is black and sticky solid used for making roads. a) paraffin wax b)asphalt c)kerosene d) gasoline

Last Answer : b)asphalt

Description : Which of the following has the highest gum forming tendency in gosoline? (A) Paraffins (B) Diolefins (C) Aromatics (D) Naphthenes

Last Answer : (B) Diolefins

Description : The contact process is involved in the manufacture of - (1) Nitric acid (2) Sulphuric acid (3) Ammonia (4) Caustic soda

Last Answer : (2) Sulphuric acid Explanation: It is also a central substance in the chemical industry. It is widely produced by contact process. Now days, sulphuric acid is prepared by contact process all over ... process is based upon the catalytic oxidation of sulfur dioxide (SO2) to sulfur trioxide (SO3).

Description : Describe the manufacturing process of caustic soda with process flow diagram. 

Last Answer : Manufacturing Process of caustic soda : Process description   Purified saturated brine is heated and electrolyzed in a diaphragm cell. The cell operating at 45-55% decomposition efficiency, ... Chlorine is collected, dried, compressed and cooled upto-30oC and collected as liquid chlorine.

Description : Draw process flow diagram for manufacturing of Caustic soda and Chlorine. 

Last Answer : PFD of manufacturing process of Caustic Soda and Chlorine

Description : __________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether

Last Answer : (B) Ethyl alcohol

Description : Esters of fatty acids with higher alcohol other than glycerol are called as (A) Oils (B) Polyesters (C) Waxes (D) Terpenoids

Last Answer : Answer : C

Description : An ideal material of construction for the storage of 50% caustic soda solution would be (A) Karbate (B) High silicon cast iron (C) Monel (D) None of these

Last Answer : (C) Monel

Description : Platinum and silver are corroded by (A) Caustic soda solution (B) Phosphoric acid (C) Sulphuric acid (10%) (D) None of these

Last Answer : (D) None of these

Description : Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Last Answer : (C) Storage tank for storing brine and caustic soda

Description : Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Last Answer : (B) Fruit juices, milk & its products and caustic soda solution

Description : Evaporators used in caustic soda recovery and production plant are made of (A) Monel metal (B) Gun metal (C) Wood metal (D) Babbitt metal

Last Answer : (A) Monel metal

Description : Rubber lined pumps can be used to pump (A) Caustic soda (B) Chlorinated brine (C) Hypochlorous acid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire

Last Answer : (B) Graphite and moving mercury

Description : Both white phosphorous as well as red phosphorous (A) Are soluble in CS2 (B) Burns when heated in air (C) Reacts with hot caustic soda solution to give Phosphine (D) All (A), (B), and (C)

Last Answer : (B) Burns when heated in air

Description : Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water (B) Cooling and freezing of water kills the ... goes on decreasing (D) Dissolved oxygen content in high pressure boiler feed water should be nil

Last Answer : (B) Cooling and freezing of water kills the bacteria present in it

Description : Exothermic neutralisation reaction between caustic soda and dodecylbenzene sulfonic acid produces sodium dodecylbenzene sulphate, which is a/an (A) Explosive (B) Soap (C) Detergent (D) Analgesic drug

Last Answer : (C) Detergent

Description : Which of the following is a co-product during the manufacture of caustic soda by electrolysis of brine? (A) Na2CO3 (B) NaHCO3 (C) H2 (D) None of these

Last Answer : (C) H2

Description : Mercury cells for caustic soda manufacture, compared to diaphragm cells (A) Require lower initial investment (B) Require more power (C) Produce lower concentration NaOH (D) None of these

Last Answer : (D) None of these

Description : Mercury electrolytic cells are preferred over diaphragm electrolytic cell (for production of caustic soda), as it (A) Has larger production capacity per unit cell (B) Consumes less power per ton of Cl2 produced (C) Produces high purity (70%) caustic soda directly (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Last Answer : (D) Caustic soda

Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Last Answer : (C) Aqueous solution (10% water) of diethylene glycol

Description : Which color precipitates when caustic soda solution is added to iron salt solution ?

Last Answer : Reddish brown precipitates .

Description : What is the use of caustic soda ?

Last Answer : Use of Caustic Soda Caustic soda is used in the production of soap and paper , artificial silk and sodium metals. Used in petroleum cleaning and rubber recovery. Used as a reagent in the laboratory. ... etc. Caustic soda is used in refining and recycling of aluminum ore. Used in the paper industry.