Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Pick out the wrong statement regarding the solubility characteristics of
high polymers.
(A) Greater the degree of cross-linking in the polymer, lesser is its solubility
(B) Polymers having more aliphatic character are more soluble in aliphatic
solvents, while those polymers having more aromatic character are more soluble
in aromatic solvents
(C) Swelling tendency or solubility of polymers in a particular solvent
decreases with increase in molecular weight of the solvent
(D) High molecular weight polymers on dissolving gives solution of very
low viscosity
by

1 Answer

Answer :

(D) High molecular weight polymers on dissolving gives solution of very
low viscosity
by

Related questions

Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble in common solvents (C) The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Description : Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble ... (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Last Answer : (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Viscosity of a polymer solution or melt (A) Decreases with increase in molecular weight (B) Decreases with increase in temperature (C) Increases with increase in temperature (D) Does not vary with temperature rise

Description : Viscosity of a polymer solution or melt (A) Decreases with increase in molecular weight (B) Decreases with increase in temperature (C) Increases with increase in temperature (D) Does not vary with temperature rise

Last Answer : (C) Increases with increase in temperature

With increase in the molecular weight of aromatic present in kerosene, its smoking tendency (A) Increases (B) Decreases (C) Remain same (D) Is unpredictable

Description : With increase in the molecular weight of aromatic present in kerosene, its smoking tendency (A) Increases (B) Decreases (C) Remain same (D) Is unpredictable

Last Answer : (A) Increases

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

The catalytic power of enzymes is due to (a) the presence of amino acids in their structures (b) their high molecular weight (c) their ability to lower the activation energy of the reaction (d) their limited solubility in water and other solvents

Description : The catalytic power of enzymes is due to (a) the presence of amino acids in their structures (b) their high molecular weight (c) their ability to lower the activation energy of the reaction (d) their limited solubility in water and other solvents

Last Answer : Ans:(c)

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

A negative heat of solution indicates that: w) an endothermic dissolving process occurs x) solute solubility increases with rising solution temperature y) solute solubility decreases with rising solution temperature z) super-saturation conditions exist

Description : A negative heat of solution indicates that: w) an endothermic dissolving process occurs x) solute solubility increases with rising solution temperature y) solute solubility decreases with rising solution temperature z) super-saturation conditions exist

Last Answer : ANSWER: Y -- SOLUTE SOLUBILITY DECREASES WITH RISING SOLUTION TEMPERATURE

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Description : Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Last Answer : (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Description : Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Description : Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Last Answer : (A) Polymers made of only one monomer is called homopolyme

Pick out the wrong statement. (A) Cellulose acetate membranes are used in dialysis process (B) Elutriation process refers to when the soluble material is largely concentrated on the surface of an insoluble solid and is simply washed off by the solvent (C) 'Cascade' means a group of stages interconnected so that various streamflow from one to another(D) Zirconia probe is used for the humidity measurement

Description : Pick out the wrong statement. (A) Cellulose acetate membranes are used in dialysis process (B) Elutriation process refers to when the soluble material is largely concentrated on the surface of an ... that various streamflow from one to another (D) Zirconia probe is used for the humidity measurement

Last Answer : (D) Zirconia probe is used for the humidity measurement

For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates(D) All (A), (B) and (C)

Description : For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The antibodies raised against a pure protein will show only one sharp spike on this technique: (A) Solubility curve (B) Solvent precipitation (C) Molecular weight determination (D) Immuno electrophoresis

Description : The antibodies raised against a pure protein will show only one sharp spike on this technique: (A) Solubility curve (B) Solvent precipitation (C) Molecular weight determination (D) Immuno electrophoresis

Last Answer : Answer : D

Choose the correct statement. (A) Coking tendency increases with increasing molecular weight (B) Coking tendency decreases with increasing molecular weight (C) Higher pressure enhances coke formation (D) Coking is an exothermic reaction

Description : Choose the correct statement. (A) Coking tendency increases with increasing molecular weight (B) Coking tendency decreases with increasing molecular weight (C) Higher pressure enhances coke formation (D) Coking is an exothermic reaction

Last Answer : (A) Coking tendency increases with increasing molecular weigh

Tin vessels are corroded by(A) Anhydrous ammonia(B) Aromatic solvents(C) Synthetic detergent solution(D) None of these

Description : Tin vessels are corroded by (A) Anhydrous ammonia (B) Aromatic solvents (C) Synthetic detergent solution (D) None of these

Last Answer : (D) None of these

Pick the wrong statement: hydrogen bonding results in (a) Increased solubility in water (b) Higher Van der Waal's forces (c) Molecular association (d) Abnormal boiling point

Description : Pick the wrong statement: hydrogen bonding results in (a) Increased solubility in water (b) Higher Van der Waal's forces (c) Molecular association (d) Abnormal boiling point

Last Answer : Ans:(b)

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

Pick out the correct combination about the role of various additives used in polymers. (A) Plasticiser: increases the polymer strength (B) Heat stabiliser: increases the maximum service temperature (C) Fillers: Does not affect the property of polymer but increases its weight (D) Lubricants: increases the flexibility of polymers

Description : Pick out the correct combination about the role of various additives used in polymers. (A) Plasticiser: increases the polymer strength (B) Heat stabiliser: increases the maximum service ... property of polymer but increases its weight (D) Lubricants: increases the flexibility of polymers

Last Answer : Option C

Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Description : Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Last Answer : (C) Solubility

. Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature

Description : . Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature

Last Answer : (D) High viscosity index means a large change in viscosity with change in temperature

Which statement about the structure of benzene is not true? (a) The two Kekule structures of benzene are in equilibrium. (b) The carbon-carbon bond lengths in benzene are greater than the carbon-carbon double bonds in aliphatic compounds. (c) The molecular geometry of benzene is best described as planar. (d) The stability of benzene ring is much greater than the stability of 1,3,5- cycloheptatriene

Description : Which statement about the structure of benzene is not true? (a) The two Kekule structures of benzene are in equilibrium. (b) The carbon-carbon bond lengths in benzene are greater than the carbon- ... (d) The stability of benzene ring is much greater than the stability of 1,3,5- cycloheptatriene

Last Answer : The two Kekule structures of benzene are in equilibrium

Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases

Last Answer : (D) Decreases as the moisture content of flakes increases

Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the reaction is practically irreversible in nature (C) The intercept of the Arrhenius plot is called the 'activation energy' (D) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

Pick out the correct statement. (A) Diffusivity decreases with increase in temperature (B) Diffusivity increases with increase in molecular weight (C) Diffusivity increases with the size of the individual molecule (D) None of these

Description : Pick out the correct statement. (A) Diffusivity decreases with increase in temperature (B) Diffusivity increases with increase in molecular weight (C) Diffusivity increases with the size of the individual molecule (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. Generally for physical adsorption, a gas of (A) Higher molecular weight is adsorbed in preference to a gas of low molecular weight (B) High critical temperature is adsorbed in preference to a gas of low critical temperature (C) Low volatility is adsorbed in preference to a gas of high volatility (D) None of these

Description : Pick out the wrong statement. Generally for physical adsorption, a gas of (A) Higher molecular weight is adsorbed in preference to a gas of low molecular weight (B) High critical temperature ... volatility is adsorbed in preference to a gas of high volatility (D) None of these

Last Answer : (D) None of these

Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Coal tar (produced by high temperature carbonisation) is the main source of (A) Aromatic compounds (B) Aliphatic compounds (C) Paraffins (D) Olefins

Description : Coal tar (produced by high temperature carbonisation) is the main source of (A) Aromatic compounds (B) Aliphatic compounds (C) Paraffins (D) Olefins

Last Answer : (A) Aromatic compounds

With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Description : With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Last Answer : (A) Diffusivity of solute increases

Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Description : Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Last Answer : (B) Employs two solvents

Pick out the wrong statement. (A) Copper is the metal having the highest electronic conductivity (B) Hardenability & Weldability of metals are inversely related (C) Covalent bonding formed by sharing of electrons is present in all semiconductor materials (D) Glass transition temperature applies to 'polymers' but not to 'glasses'

Description : Pick out the wrong statement. (A) Copper is the metal having the highest electronic conductivity (B) Hardenability & Weldability of metals are inversely related (C) Covalent bonding formed by ... all semiconductor materials (D) Glass transition temperature applies to 'polymers' but not to 'glasses'

Last Answer : Option A

Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below the operating line (C) In case of an absorber, the operating line is always above the equilibrium curve (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Description : Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below ... (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Last Answer : (B) In case of a stripper, the equilibrium curve is always below the operating line

Solvay process is not used for the manufacture of potassium carbonate, because of the reason that potassium bicarbonate (A) Is prone to thermal decomposition (B) Has high water solubility and is unstable (C) Is soluble in ammonium chloride and potassium chloride solution (D) All (A), (B) and (C)

Description : Solvay process is not used for the manufacture of potassium carbonate, because of the reason that potassium bicarbonate (A) Is prone to thermal decomposition (B) Has high water solubility and is unstable (C) Is soluble in ammonium chloride and potassium chloride solution (D) All (A), (B) and (C)

Last Answer : (C) Is soluble in ammonium chloride and potassium chloride solution

Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used in solvent extraction decreases (C) The selectivity of solvent used in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used ... in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

Vulcanization is the process of cross-linking polymer chains in rubber using (a) Sulfur. (b) Formaldehye. (c) Benzoyl peroxide. (d) Ethylene glycol.

Description : Vulcanization is the process of cross-linking polymer chains in rubber using (a) Sulfur. (b) Formaldehye. (c) Benzoyl peroxide. (d) Ethylene glycol.

Last Answer : Sulfur.

Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Description : Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Last Answer : (A) Good mechanical strength

Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Description : Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Last Answer : (A) 50000

Pick out the wrong statement. (A) A pale color of petroleum product indicates lower viscosity (B) Color of petroleum products indicates the degree of refinement (C) Lighter petroleum distillates are lighter in color than the heavier residual oils (D) Fluorescence of oils helps to detect its adulteration

Description : Pick out the wrong statement. (A) A pale color of petroleum product indicates lower viscosity (B) Color of petroleum products indicates the degree of refinement (C) Lighter petroleum distillates are ... in color than the heavier residual oils (D) Fluorescence of oils helps to detect its adulteration

Last Answer : (A) A pale color of petroleum product indicates lower viscosity

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel apparatus is used for determining flash points below 50°C (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Description : Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel ... An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Last Answer : (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Description : In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Last Answer : (D) Saturated polyeste

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads