What is a single purpose processor?

1 Answer

Answer :

Single Purpose Processor

  • Single purpose processor is design to execute only one program.
  • It perform particular computation task.
  • So it have faster performance.
  • Size of single purpose processor is small.
  • Power consumption is low.
  • Size is small means it have less multiplexers.
  • No program memory.
  • Coprocessor, Floating point processing and peripherals are the example of single purpose processor.
  • The datapath contains only required components.

Related questions

Description : General Purpose Processor

Last Answer : A general purpose processor, sometimes called a central Processing Unit CPU or a microprocessor. It consists of a data path and control unit, tightly linked with a memory. The general ... system functionality.Data information represents the value being input, output and transformed by the program.

Description : Explain the various steps involved in designing a custom single-purpose processor.

Last Answer : A single purpose processor is a digital circuit designed to execute exactly one program. It is also known as co-processor, accelerator or peripheral. It contains only ... for small quantities. Performance may not match general-purpose processors for same applications.

Description : Application Specific Instruction Set Processor (ASIP)

Last Answer : An application specific instruction set processor (ASIP) can serve as a compromise between the general purpose processor and single-purpose processors. An ASIP is a Programmable processor ... fetch sequential data memory locations in parallel with other operations to further speed execution.

Description : So, is my 3800+ processor 3.8ghz or not?

Last Answer : answer:3800 is just the model number. Unrelated to speed. Intel i7 processors do not run at i7 MHz. The old nvidia 8800 graphics cards don't run at 8.8 ghz, nor do they have 8.8 gigs of VRAM.. My ... the 3800 line, see the AMD website listing. It looks like most of them run between 2 and 2.4 GHz.

Description : What Happens When Hlt Instruction Is Executed In Processor?

Last Answer : Answer :The Micro Processor enters into Halt-State and the buses are tri-stated.

Description : What is multicore processor? Describe in brief.

Last Answer : Multicore Processor: It is an integrated circuit in which two or more processors core have been packaged for enhanced performance, reduced power consumption and more efficient simultaneous ... Multicore processors will give the benefits to all software especially for multithreaded program.

Description : Describe different RT level computational and sequential components used to design single function processors.

Last Answer : RT-level combinational components:- To reduce the complexity in digital logic, combinational components are used, which are more powerful than logic gates.  Such combinational ... during a clock edge. An asynchronous inputs value effects the circuit independent of the clock.

Description : If man has no purpose, why would animals have any?

Last Answer : answer:Different people have different beliefs. Don't make a strawman argument that because someone said at one time that Man has no purpose on Earth that it's a generally relevant belief or statement ... far know - but that doesn't mean that one person's values are uniform across all Mankind.

Description : What is the purpose of the United States of America?

Last Answer : answer:Originally, its purpose was to establish a free democratic society for its citizens at a time when there were no free democratic societies. How the worm has turned, eh?

Description : Is there a real purpose for neckties?

Last Answer : answer:Yes. Present purpose is to send subtle code. That old school tie is not just a play on words. Way back when, when ties were cravats [which they still may be at Ascot] they kept the neck ... gross. But Think of Queen Elizabeth I and her enormous ruff in all her pix-how dirty was that? UGH.

Description : What is the purpose of boredom?

Last Answer : For me, it is a starter kit for big trouble. I will not provide an example .So,there. XD

Description : What is the purpose of docks (e.g. the Apple or Vista one, ObjectDock etc.) on the desktop?

Last Answer : Unlike shortcuts on the desktop, by default the dock is always visible.

Description : What is the real meaning and purpose of Christmas?

Last Answer : to me it symbolizes the birth of my savior. Yes I know it wasn’t really his birthday but some day had to do

Description : What is the purpose of your religion? (not a debate)

Last Answer : My religion acts as a moral compass that guides the decisions I make in regards to the actions I take toward myself and others. And by religion, I mean my conscience.

Description : What events or experiences in your life have hinted or suggested that you were created for a specific purpose?

Last Answer : I don’t really understand what you mean by ‘specific purpose’? Do you mean by a certain career? Or do you mean as in maybe put on the earth to save people’s lives?

Description : How To Make All Purpose Spray Cleaner

Last Answer : Materials: 1/2 tsp. washing soda a dab of liquid soap 2 cups hot tap water Instructions: Combine the ingredients in a spray bottle and shake until the washing soda has dissolved. Apply and wipe off with a sponge or rag.

Description : How To Make An All Purpose Hand Cream

Last Answer : Ingredients: 3 tbsp mashed almonds 2 tbsp comfrey root (dried) 1 tbsp chopped parsley 1 egg 1 tbsp honey 1 tbsp glycerin Instructions: Mix almond meal, comfrey root and parsley in a small ... letting it penetrate for 20-30 minutes, then wash off with warm water. Refrigerate mixture between uses.

Description : Purpose of Selective Catalytic Reduction (SCR)

Last Answer : Purpose of Selective Catalytic Reduction (SCR) : 1. It reduces Nox 75% to 90% 2. Converts it in to molecular nitrogen and water vapor 3. It reduces HC emission up to 80% 4. It reduces PM emission 20 to 25%.

Description : State the purpose of lighting control. List the different types of dimmer.

Last Answer : Purpose of Lighting Control:- 1. To turn ON or OFF the lamps 2. For dimming: The dimming control permits the adjustment of lighting over a range. 3. For changing the lighting levels ... operated dimmer 6) Triac operated Dimmer 7) PWM (Pulse width modulation) Controlled technique.

Description : Describe the functions of General purpose registers of 8086 microprocessor.

Last Answer : (i) General Purpose Registers of 8086 1. AX (Accumulator) - Used to store the result for arithmetic / logical operations All I/O data transfer using IN & OUT instructions use A ... Index - acts as the destination for string movement instructions Used to hold offset address of Extra segment.

Description : Explain the purpose of shielding and reflector in a nuclear reactor.

Last Answer : 1. Shielding:-  The function of sheilding is to protect environment, humens and animals from the harmful radioactive radiation (pollution).before they are emitted to atmosphere. Shilding is provided to ... :- The function of reflector is to reflect back the neutrons which are leaving from core.

Description : The colour band on the extreme left in general purpose fixed resistors represents: A) Tolerance B) First significant digit C) Wattage Rating D) Voltage Rating

Last Answer : The colour band on the extreme left in general purpose fixed resistors represents: First significant digit

Description : The purpose of a parallel circuit resonance is to magnify?

Last Answer : The purpose of a parallel circuit resonance is to magnify voltage.

Last Answer : The purpose of stator winding in the compensated repulsion motor is to improve power factor and provide better speed regulation.

Description : What is the main purpose of electroplating?

Last Answer : Protecting  reactive  metals  from  corrosion.

Description : SINGLE PHASE INDUCTION MOTORS MCQ

Last Answer : 101. After the starting winding of a single phase induction motor is disconnected from supply, it continues to run only on (a) running winding (b) rotor winding (c) field winding (d) compensating winding Ans: a ... motor is usually reduced by using (a) gearing (b) belts (c) brakes (d) chains Ans: a

Description : State the meaning of Single line diagram.

Last Answer : Meaning of Single line diagram: The single line diagram of a power system is the network which shows the main connections and arrangement of the system components along with their data ( ... breakers, transformers, capacitors, bus bars, and conductors are shown by standardized schematic symbols. 

Description : Draw single phase full wave mid-point converter for inductive load. Draw input and output waveforms for it. 

Last Answer : Circuit Diagram: Waveforms:

Description : Single phase transformer

Last Answer : Single phase Transformer Transformer

Description : Explain MCB and ELCB with connection diagram supplying single phase load. 

Last Answer : OR OR Explanation: * MCB provides short circuit protection. * MCB provides overload protection * ELCB provides earth fault protection. * MCB is in series with ... occurs, the ELCB cuts off the power within the time of 0.1 sec. automatically to protect the personnel. 

Description : Single point Cutting tool signature

Last Answer : The shape of a tool is specified in a special sequence and this special sequence is called tool signature. The tool signature is given below (i) Back rake angle (ii) Side rake angle (iii) ... rake, end relief, side relief, end cutting edge, side cutting edge angle and 0.8 mm nose radius.

Description : State suitable single phase motor for following applications: (i) Table fan (ii) Mixers and Grinders

Last Answer : Application Suitable Single Phase Motor Table Fan 1) Capacitor split phase motor 2) Capacitor start capacitor run motor Mixers and Grinders 1) Universal motor 2) A.C. Series motor

Description : Illustrate with neat wiring diagram a single lamp control by two point method.

Last Answer : Single lamp control by two point method:  This system is commonly used for stair case wiring. It consists of two way switches (the switch operates always in one of the two possible positions) the ... the person will change the position of switch S2, so that the lamp will be switched OFF'.

Description : Source transformation Replace the circuit with voltage source in series with a single resistor

Last Answer : Source transformation Replace the circuit with voltage source in series with a single resistor

Description : Why is a capacitor used in a single phase motor and not in three phase motor ?

Last Answer : In 1-phase induction motor capacitor work is generate the auxiliary winding current than excite the main winding to rotor starts rotate. After rotor start rotating about 75% of their speed than auxiliary ... emf to start the motor.so,in 3-phase induction motor is self start induction motor.

Description : working principle of single phase motor

Last Answer : The Stator of single phase induction motor houses two windings  1. Main (Running) winding 2. Auxiliary (Starting ) winding Rotor of single phase induction motor is ... with starting winding or a capacitor may be permanently connected in series with Auxiliary (Starting ) winding.

Description : Single stage CE amplifier

Last Answer : Requirement(Necessity) of Multistage amplifier: -In many applications we required a high gain. But sometimes gain produced by an amplifier is not sufficient so to increase the gain, we ... necessity of multistage amplifier is for providing high gain. It is also required for high bandwidth.

Description : Explain the working of a single phase capacitor start induction motor. 

Last Answer : Single phase capacitor start induction motor https://youtu.be/31lvvzU5Puc

Description : Explain construction and working principle of single phase transformer.

Last Answer : A single phase transformers is an electrical device that accepts single-phase AC power and outputs single-phase AC. PRINCIPLE... The single-phase transformer works on the principle of ... and secondary windings. Thin steel laminations shall be employed to prevent power losses from the core.

Description : Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.

Description : State advantages of three phase over single phase.

Last Answer : Advantages of 3-phase system over 1-phase system: -  1. More output: For the same size, output of poly-phase machines is always higher than single phase machines.  2. Smaller size: For ... are self- starting: The three phase ac motors are self starting, while single phase induction motor are not.

Description : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: A) Half the total number of electrons in the crystal B) Zero C) Half the number of atoms in the crystal D) Half the number of free electrons in the crystal

Last Answer : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: Zero 

Description :  In a 16-bit microprocessor, a single word is A) 16 bit data B) 32 bit data C) 8 bit data D) 64 bit data 

Last Answer :  In a 16-bit microprocessor, a single word is 16 bit data

Description : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he

Last Answer : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he 0.52

Description : What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

Last Answer : What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

Description : What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

Last Answer : What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

Description : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is (A) 1.125 cm (B) 1.5 cm (C ) 2 cm (D) 8 cm

Last Answer : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is 2 cm 

Description : A switch tail ring counter is made by using a single D-FF. The resulting circuit is (A) T-FF (B) D-FF (C) SR-FF (D) JK-FF

Last Answer : A switch tail ring counter is made by using a single D-FF. The resulting circuit is T-FF

Description : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

Last Answer : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is 22.0 mm

Description : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

Last Answer : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is 500 W