Description : When a transmission line uses ground return, it is called a/an __________ line. A. ungrounded B. balanced C. unbalanced D. grounded
Last Answer : C. unbalanced
Description : What type of balun (balanced-to-unbalanced) is used in high frequency applications? A. Transformer type balun B. A specially configured coaxial transmission line C. A specially configured parallel-wire line D. A λ/2 transformer balun
Last Answer : B. A specially configured coaxial transmission line
Description : A transmission line consisting of two conductors that have equal resistance per unit length. A. Unbalanced line B. Open-wire line C. Balanced line D. Coaxial line
Last Answer : C. Balanced line
Description : In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above
Last Answer : Answer: D
Description : If profit, sales, production, etc is given then it is _________ a. Balanced problem b. Unbalanced problem c. Maximization problem d. Minimization problem
Last Answer : c. Maximization problem
Description : The loads on distributors systems are generally (a) balanced (b) unbalanced (c) either of the above (d) none of the above
Last Answer : (b) unbalanced
Description : Man-made noise is usually from _______. A. transmission over power lines and by ground wave B. sky-wave C. space-wave D. troposphere
Last Answer : A. transmission over power lines and by ground wave
Description : The input terminal impedance at the center of a folded dipole antenna is A. 72 Ω B. 300 Ω C. 50 Ω D. 73 Ω
Last Answer : B. 300 Ω
Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source
Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals
Description : What is the input terminal impedance at the center if a folded dipole antenna? A. 300 ohms B. 72 ohms C. 50 ohms D. 450 ohms
Last Answer : A. 300 ohms
Description : What is the purpose of having input and output capacitors in three terminal IC regulators?
Last Answer : A capacitor connected between the input terminal and ground cancels the inductive effects due to long distribution leads. The output capacitor improves the transient response.
Description : ___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug
Last Answer : C. Modem
Description : Factors that determine the radiation resistance of an antenna A. Transmission line length and height of antenna B. The location of the antenna with respect to nearby objects C. It is a constant for all antennas since it is physical D. Sunspot activity and the time of day
Last Answer : B. The location of the antenna with respect to nearby objects
Description : Is a A child being pushed on a swing a balanced or unbalanced force?
Last Answer : Feel Free to Answer
Description : Is an An asteroid traveling through space at a constant speed a balanced or unbalanced force?
Description : What are the forces on a kicked soccer ball balanced or unbalanced How do you know?
Last Answer : What is the answer ?
Description : If a book is hanging from a rope are the forces balanced or unbalanced and why?
Last Answer : The forces at work are balanced. Gravity is pulling the book (and the rope) down, and the rope exerts an equal and opposite force to keep the book suspended.
Description : balanced vs unbalanced transportation models differentiated?
Last Answer : 17. What major benefits do corporations and investors enjoy because of the existence of organized security exchanges
Description : Differentiate between: (a) Reactants and products (b) A balanced and an unbalanced chemical equation
Last Answer : (a) Reactants and products Reactants 1. The substances that react with one another are called reactants. 2. Reactants are written on the left hand side of equation. Products 1. The new substances formed are ... are not equal to the number of elements on product side. 2. Ex- H2 + Cl2 → 2HCl
Description : Which of the following systems produce a vibration in the foundation? (A) Coupled machine(B) Uncoupled machine (C) Balanced machine (D) Unbalanced machine
Last Answer : (D) Unbalanced machine
Description : Which of the following systems produce a vibration in the foundation? (A) Coupled machine (B) Uncoupled machine (C) Balanced machine (D) Unbalanced machine
Description : Which of the following systems produce a vibration in the foundation? a) Unbalanced machine b) Balanced machine c) Coupled machine d) Uncoupled machine
Last Answer : a) Unbalanced machine
Description : When there are several projects are executing simultaneously, matrix organization allows a better companywide A. Balance of resources B. Prioritized resources C. Balanced capital D. Unbalanced resources
Last Answer : Balance of resources
Description : If no. of rows are not equal to number of columns and the matrix elements are profit elements then the problem is: a. Balanced and Maximization Transportation problem b. ... Transportation problem c. Balanced and Maximization Assignment problem d. Unbalanced and Maximization Assignment problem
Last Answer : a. Balanced and Maximization Transportation problem
Description : If no. of rows are equal to number of columns and the matrix elements are Time elements then the problem is: a. Balanced and Minimization Transportation problem b. ... Transportation problem c. Balanced and Minimization Assignment problem d. Unbalanced and Minimization Assignment problem
Last Answer : c. Balanced and Minimization Assignment problem
Description : If cost, time, etc is given, then it is ________ a. Balanced problem b. Unbalanced problem c. Maximization problem d. Minimization problem
Last Answer : d. Minimization problem
Description : If the number of jobs is not equal to the number of resources, then the problem is term as _____ assignment problem a. Balanced b. Unbalanced c. Equal d. Unequal
Last Answer : b. Unbalanced
Description : If the number of jobs is equal to the number of resources, then the problem is term as _____ assignment problem a. Balanced b. Unbalanced c. Equal d. Unequal
Last Answer : a. Balanced
Description : Define for polyphase circuit (i) Balanced load (ii) Unbalanced load. Draw one example circuit for each type of load.
Last Answer : i) Balanced Load: Balanced three phase load is defined as star or delta connection of three equal impedances having equal real parts and equal imaginary parts. Example circuit: ii) ... satisfy the condition of balance, then it is called as unbalanced load. Example circuit:
Description : Define balanced and unbalanced load in three phase circuit.
Last Answer : Balanced Load: When all the imedances of 3 phases are equal in magnitude and of same nature then load is said to be balanced. Unbalanced Load: When all the imedances of 3 phases are not equal in magnitude and of different nature then load is said to be unbalanced.
Description : The minimum number of wattmeter(s) required to measure 3-phase, 3-wire balanced or unbalanced power is A) 1 B) 2 C) 3 D) 4
Last Answer : B
Description : The transformer which transforms unbalanced line to a balanced line is better known as (A) Impedance transformer (B) Amplifier (C) Balun (D) Oscillator
Last Answer : The transformer which transforms unbalanced line to a balanced line is better known as Balun
Description : When waves bend away from straight lines of travel, it is called _________. A. Refraction B. Reflection C. Rarefaction D. Diffraction
Last Answer : A. Refraction
Description : The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance ... input power to below its critical level. D. an impedance mismatch between the load and the line.
Last Answer : D. an impedance mismatch between the load and the line.
Description : Which of the following characterizes a properly terminated transmission line? A. The line loss is minimum. B. The standing wave ratio is minimum. C. The input impedance is twice the load impedance. D. The standing wave ratio is one.
Last Answer : D. The standing wave ratio is one.
Description : What is the input impedance of a transmission line if its characteristic impedance is 300 Ω and the load is 600 Ω? Assume a quarter wavelength section only. A. 150 kΩ B. 150 mΩ C. 150 Ω D. 2 Ω
Last Answer : C. 150 Ω
Description : A coaxial cable has 7dB of reflected power when the input is 5 watts. What is the output of the transmission line? A. 5 watts B. 2.5 watts C. 1.25 watts D. 1 watt
Last Answer : D. 1 watt
Description : The outer conductor of a coaxial transmission line is always grounded at the A. Input only B. Input and output C. Output only D. Point of high SWR
Last Answer : B. Input and output
Description : Characteristics impedance of a transmission line is the impedance measured at the ___________ when its length is infinite. A. input B. shorted end of the line C. output D. midsection
Last Answer : A. input
Description : ECE Board Exam March 1996 The potential difference between any exposed structured to ground in any electrical installation should not exceed _________ volts RMS. A. 10 B. 45 C. 0 D. 30
Last Answer : B. 45
Description : Component F in the illustrated device is for _________. EL-0033 A. short circut protection B. latching the trip unit closed after resetting the breaker C. overload protection D. providing a flexible connection between the input terminal G and the tripping unit E
Last Answer : Answer: C
Description : In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal ... 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC
Description : In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC
Last Answer : Answer: A
Description : In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC
Description : The velocity factor in transmission lines vary from ___ to ___. A. 0.6 to 0.8 B. 0.3 to 0.5 C.0.5 to 0.9 D. 0.8 to 0.9
Last Answer : C.0.5 to 0.9
Description : Transmission of printed material over telephone lines. A. Video text B. Facsimile C. Encoding D. Xerox copy
Last Answer : B. Facsimile
Description : Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line
Last Answer : C. resistive load at the resonant frequency
Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna
Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna
Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps
Last Answer : C. 320 bps
Description : The total propagation delay time from transmission to reception of signals from a ground transmitter to ground receiver with angle of elevation at 10 degrees respectively is A. 273 ms B. 239 ms C. 275 ms D. 260 ms
Last Answer : A. 273 ms