A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

A modulation which does not follow the sine wave pattern, it produces undesirable
harmonics such as spurious emission
A. 0% modulated
B. Over-modulated
C. Unmodulated
D. 100% modulated
by

1 Answer

Answer :

B. Over-modulated
by

Related questions

In amplitude modulation technique the unmodulated carrier is referred to as having ______. A. 100% modulation B. 0% modulation C. 50% modulated D. Over modulated

Description : In amplitude modulation technique the unmodulated carrier is referred to as having ______. A. 100% modulation B. 0% modulation C. 50% modulated D. Over modulated

Last Answer : B. 0% modulation

Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Description : Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Last Answer : C. Out of the band

At 100% modulation, the sum fo the effective voltages in both sidebands is equal to ______% of the unmodulated carrier voltage. A. 50 B. 71 C. 100 D. 25

Description : At 100% modulation, the sum fo the effective voltages in both sidebands is equal to ______% of the unmodulated carrier voltage. A. 50 B. 71 C. 100 D. 25

Last Answer : B. 71

A transmitter supplies 8 kW to the antenna when it is unmodulated, determine the total radiated power when modulated at 90%. A. 5 kW B. 20 kW C. 15 kW D. 8.36 kW

Description : A transmitter supplies 8 kW to the antenna when it is unmodulated, determine the total radiated power when modulated at 90%. A. 5 kW B. 20 kW C. 15 kW D. 8.36 kW

Last Answer : D. 8.36 kW

Modulation in which the modulated wave is always present. A. Carrier modulation B. Front-end C. Continuous modulation D. Log-periodic modulation

Description : Modulation in which the modulated wave is always present. A. Carrier modulation B. Front-end C. Continuous modulation D. Log-periodic modulation

Last Answer : C. Continuous modulation

For 100% modulation, total power is? a) same as the power of unmodulated signal b) twice as the power of unmodulated signal c) four times as the power of unmodulated signal d) one and half times as the power of unmodulated signal

Description : For 100% modulation, total power is? a) same as the power of unmodulated signal b) twice as the power of unmodulated signal c) four times as the power of unmodulated signal d) one and half times as the power of unmodulated signal

Last Answer : Ans: D

Refers to the first symbol in an emission designation with an amplitude modulated main carrier represented by letter H. A. Single sideband suppressed carrier B. Double sideband full carrier C. Independent sideband D. Double sideband

Description : Refers to the first symbol in an emission designation with an amplitude modulated main carrier represented by letter H. A. Single sideband suppressed carrier B. Double sideband full carrier C. Independent sideband D. Double sideband

Last Answer : B. Double sideband full carrier

What is emission F3F? A. Facsimile B. Modulated CW C. RTTY D. Television

Description : What is emission F3F? A. Facsimile B. Modulated CW C. RTTY D. Television

Last Answer : D. Television

What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

The ratio of the level of the modulated output of a transmitter under conditions of standard test modulation to the level of the demodulated output with no modulation applied both measured with the same bandwidth. A. Reference audio output B. None of these C. Audio frequency response D. Residual noise level

Description : The ratio of the level of the modulated output of a transmitter under conditions of standard test modulation to the level of the demodulated output with no modulation applied both measured with the ... . Reference audio output B. None of these C. Audio frequency response D. Residual noise level

Last Answer : D. Residual noise level

The audio signals of TV are – (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Description : The audio signals of TV are – (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Last Answer : (2) Frequency modulated Explanation: In analogue television, the sound portion of a broadcast is invariably modulated separately from the video. Most commonly, the audio and video are combined at ... visual antennas can be used. In almost all cases, standard wideband frequency modulation is used.

The audio signals of TV are : (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Description : The audio signals of TV are : (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Last Answer : (2) Frequency modulated Explanation: In telecommunications and signal processing, frequency modulation (FM) conveys information over a carrier wave by varying its instantaneous frequency. This contrasts with ... , the sound portion of a broadcast is invariably modulated separately from the video.

The audio signals of TV are (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Description : The audio signals of TV are (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Last Answer : Frequency modulated

In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Description : In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Last Answer : C. Type of modulation of the main carrier

In the designation of bandwidth and emission, what letter in the first symbol represents a double-sideband type of modulation? A. A B. B C. C D. H

Description : In the designation of bandwidth and emission, what letter in the first symbol represents a double-sideband type of modulation? A. A B. B C. C D. H

Last Answer : A. A

The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted

Description : The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted

Last Answer : D. Type of information to be transmitted

The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier

Description : The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier

Last Answer : D. Type of modulation of the main carrier

ECE Board Exam March 1996 The letter-number designation B8E is a form of modulation also known as ___________. A. pilot carrier system B. independent sideband emission C. lincomplex D. vestigial sideband transmission

Description : ECE Board Exam March 1996 The letter-number designation B8E is a form of modulation also known as ___________. A. pilot carrier system B. independent sideband emission C. lincomplex D. vestigial sideband transmission

Last Answer : B. independent sideband emission

In frequency modulation, amplitude of modulated wave is A. positive B. negative C. constant D. zero

Description : In frequency modulation, amplitude of modulated wave is A. positive B. negative C. constant D. zero

Last Answer : constant

If the carrier of a 100 percent modulation modulated AM wave is suppressed, the percentage

Description : If the carrier of a 100 percent modulation modulated AM wave is suppressed, the percentage power saving will be (A) 50.55 (B) 15.55 (C) 10.66 (D) 66.66

Last Answer : If the carrier of a 100 percent modulation modulated AM wave is suppressed, the percentage power saving will be 66.66

An AM transmitter is rated 100W at 100% modulation. How much power required for the carrier? A. 33.33 W B. 66.66 W C. 83.33 W D. 100 W

Description : An AM transmitter is rated 100W at 100% modulation. How much power required for the carrier? A. 33.33 W B. 66.66 W C. 83.33 W D. 100 W

Last Answer : B. 66.66 W

100% modulation in AM means a corresponding increase in total power by: A. 25% B. 75% C. 100% D. 50%

Description : 100% modulation in AM means a corresponding increase in total power by: A. 25% B. 75% C. 100% D. 50%

Last Answer : D. 50%

A 1000W carrier is amplitude modulated to a depth of 85%. Calculate the total power of the modulated wave? A. 1361.25 W B. 680.62 W C. 1425 W D. 712.5 W

Description : A 1000W carrier is amplitude modulated to a depth of 85%. Calculate the total power of the modulated wave? A. 1361.25 W B. 680.62 W C. 1425 W D. 712.5 W

Last Answer : A. 1361.25 W

What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Description : What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Last Answer : D. A frequency modulated continuous wave

The agreed standard for measuring loudness is the loudness sensation produced by a 1000 Hz sine wave _____ dB above the listener’s threshold of hearing. A. 80 B. 50 C. 30 D. 40

Description : The agreed standard for measuring loudness is the loudness sensation produced by a 1000 Hz sine wave _____ dB above the listener’s threshold of hearing. A. 80 B. 50 C. 30 D. 40

Last Answer : D. 40

What mixer type has the lowest spurious signals? A. Double-balanced B. Single-balanced C. Super-heterodyner D. Heterodyner

Description : What mixer type has the lowest spurious signals? A. Double-balanced B. Single-balanced C. Super-heterodyner D. Heterodyner

Last Answer : A. Double-balanced

When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Description : When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Last Answer : D. internal receiver noise.

This is referred to a product of simultaneous frequency and amplitude modulation or a carrier frequency variation which produces unwanted distortion. A. Absorption modulation B. Simultaneous modulation C. Dynamic instability D. Series modulation

Description : This is referred to a product of simultaneous frequency and amplitude modulation or a carrier frequency variation which produces unwanted distortion. A. Absorption modulation B. Simultaneous modulation C. Dynamic instability D. Series modulation

Last Answer : C. Dynamic instability

____ is defined as any radiation of energy by means of electromagnetic wave. A. Emission B. Radiation C. Radio D. Broadcasting

Description : ____ is defined as any radiation of energy by means of electromagnetic wave. A. Emission B. Radiation C. Radio D. Broadcasting

Last Answer : A. Emission

If the modulation index of an AM wave is doubled, the antenna current is also doubled, the AM system being used is A. A5C B. A3J C. A3H D. A3

Description : If the modulation index of an AM wave is doubled, the antenna current is also doubled, the AM system being used is A. A5C B. A3J C. A3H D. A3

Last Answer : B. A3J

Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%

Description : Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%

Last Answer : D. 83%

What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Description : What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Last Answer : A. Interference to adjacent channel

Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Description : Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Last Answer : D. To prevent re-radiation of the local oscillator

Stacking antenna elements A. increases sensitivity to weak signals B. will suppress odd harmonics C. decrease signal to noise ratio D. increases selectivity

Description : Stacking antenna elements A. increases sensitivity to weak signals B. will suppress odd harmonics C. decrease signal to noise ratio D. increases selectivity

Last Answer : A. increases sensitivity to weak signals

A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

Description : A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

Last Answer : A. It will radiate harmonics

The ratio of frequencies is termed. A. interval B. octave C. harmonics D. factor

Description : The ratio of frequencies is termed. A. interval B. octave C. harmonics D. factor

Last Answer : A. interval

Modulation means A. Varying of information B. Utilization of a single transmission channel to carry multiple signals C. Varying of some parameters of a carrier such as its amplitude to transmit information D. Transmit pulses in DC form on a copper wire

Description : Modulation means A. Varying of information B. Utilization of a single transmission channel to carry multiple signals C. Varying of some parameters of a carrier such as its amplitude to transmit information D. Transmit pulses in DC form on a copper wire

Last Answer : C. Varying of some parameters of a carrier such as its amplitude to transmit information

What is the relative humidity for a saturated air? A. 0% B. 50% C. 100% D. cannot say

Description : What is the relative humidity for a saturated air? A. 0% B. 50% C. 100% D. cannot say

Last Answer : ANSWER : C

When the rate of evaporation of water is zero, the relative humidity of the air is A. 0% B. 100% C. 50% D. unpredictable

Description : When the rate of evaporation of water is zero, the relative humidity of the air is A. 0% B. 100% C. 50% D. unpredictable

Last Answer : ANSWER : B

When the dew point temperature is equal to the air temperature then the relative humidity is A. 0% B. 50% C. 100% D. unpredictable

Description : When the dew point temperature is equal to the air temperature then the relative humidity is A. 0% B. 50% C. 100% D. unpredictable

Last Answer : ANSWER : C

Water will not be vaporized if – (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Description : Water will not be vaporized if – (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Last Answer : (3) the humidity is 100% Explanation: If the relative humidity is 100 percent, water will not evaporate as the air is already saturated with moisture. When relative humidity approaches 100 percent, condensation can occur. The lower the relative humidity, the easier it is for moisture to evaporate.

f there are two identical products, one that has 100% accessibility and one that has 0% accessibility, a. the one with 0% accessibility will not sell at all because consumers can’t find it. b. the product with 100% accessibility will outsell the other 2 to 1 providing all other attributes are identical. c. the one with 0% accessibility will not sell at all because consumers do not know of it. d. the product with 0% accessibility will only sell after all other products have sold in that segment. e. the product with 100% accessibility will outsell the other 3 to 1 providing all other attributes are identical.

Description : f there are two identical products, one that has 100% accessibility and one that has 0% accessibility, a. the one with 0% accessibility will not sell at all because consumers can't find ... product with 100% accessibility will outsell the other 3 to 1 providing all other attributes are identical.

Last Answer : b. the product with 100% accessibility will outsell the other 2 to 1 providing all other attributes are identical.

4. A haemophilic man marries a normal homozygous woman. What is the probability that their son will be haemophilic a) 100% b) 75 % c) 50% d) 0%

Description : 4. A haemophilic man marries a normal homozygous woman. What is the probability that their son will be haemophilic a) 100% b) 75 % c) 50% d) 0%

Last Answer : d) 0%

Water will not be vapourised if (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Description : Water will not be vapourised if (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Last Answer : the humidity is 100% 

Inan HFC network, the upstream data are modulated using the _______ modulation technique. A) QAM B) QPSK C) PCM D) ASK

Description : Inan HFC network, the upstream data are modulated using the _______ modulation technique. A) QAM B) QPSK C) PCM D) ASK

Last Answer : QPSK

Inan HFC network, the downstream data are modulated using the _______ modulation technique. A) PSK B) QAM C) PCM D) ASK

Description : Inan HFC network, the downstream data are modulated using the _______ modulation technique. A) PSK B) QAM C) PCM D) ASK

Last Answer : QAM

Which edges of the pulse can be modulated in pulse duration modulation?

Description : Which edges of the pulse can be modulated in pulse duration modulation?

Last Answer : Either, or both at the same time.

The amplifiers following the modulated stage in a low level modulation AM system be

Description : The amplifiers following the modulated stage in a low level modulation AM system be  (A) linear amplifier (B) harmonic generators (C) class C power amplifiers (D) class untuned amplifiers

Last Answer : The amplifiers following the modulated stage in a low level modulation AM system be class C power amplifiers

Which circuit detects frequency modulated signal? A. Modulator B. Discriminator C. Demodulator D. Modem

Description : Which circuit detects frequency modulated signal? A. Modulator B. Discriminator C. Demodulator D. Modem

Last Answer : B. Discriminator

A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz