What connector is popular in attaching test instruments like oscilloscopes, frequency counters, spectrum analyzers, etc? A. UHF connector B. PL-259 C. BNC D. SMA

What connector is popular in attaching test instruments like oscilloscopes, frequency
counters, spectrum analyzers, etc?
A. UHF connector
B. PL-259
C. BNC
D. SMA
by

1 Answer

Answer :

C. BNC
by

Related questions

Which of the following coaxial cable connectors is called the UHF connector? A. PL-259 B. BNC C. N-type connector D. F connector

Description : Which of the following coaxial cable connectors is called the UHF connector? A. PL-259 B. BNC C. N-type connector D. F connector

Last Answer : A. PL-259

Which coaxial connector is a more complex and expensive but do a better job in maintaining the electrical characteristics of the cable through the interconnections? A. N-type connector B. F-type connector C.BNC D. PL-259

Description : Which coaxial connector is a more complex and expensive but do a better job in maintaining the electrical characteristics of the cable through the interconnections? A. N-type connector B. F-type connector C.BNC D. PL-259

Last Answer : A. N-type connector

Which coaxial cable connector is least expensive and is widely used for TV sets,VCRs and cable TV? A. N-type connector B. F-type connector C. BNC D. PL-259

Description : Which coaxial cable connector is least expensive and is widely used for TV sets,VCRs and cable TV? A. N-type connector B. F-type connector C. BNC D. PL-259

Last Answer : B. F-type connector

Which type of connector does a Ethernet cable use? (a) BNC (b) RJ_45 (c) RJ_11 (d) MSAU -Technology

Description : Which type of connector does a Ethernet cable use? (a) BNC (b) RJ_45 (c) RJ_11 (d) MSAU -Technology

Last Answer : (b) RJ-45 most commonly used to connect computers onto Ethernet-based local area network.

When referring to spectrum analyzers, what is meant by the term resolving signals?

Description : When referring to spectrum analyzers, what is meant by the term resolving signals?

Last Answer : The ability of the analyzer to discriminate between display signals of slightly different frequencies.

What is the channel number of an FM station with a carrier frequency of 99.5 MHz? A. 256 B. 258 C. 257 D. 259

Description : What is the channel number of an FM station with a carrier frequency of 99.5 MHz? A. 256 B. 258 C. 257 D. 259

Last Answer : B. 258

Which of the following is a type of fiber connector: a. ST b. SC c. SMA d. all of the above

Description : Which of the following is a type of fiber connector: a. ST b. SC c. SMA d. all of the above

Last Answer : d. all of the above

What frequency band is referred to as the metric waves? A. VHF B. UHF C. HF D. SHF

Description : What frequency band is referred to as the metric waves? A. VHF B. UHF C. HF D. SHF

Last Answer : A. VHF

What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Description : What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Last Answer : D. A frequency modulated continuous wave

Assuming a UHF frequency range of 405.0125 MHz to 405.0875 MHz at 25 kHz channeling plan, how many channels can you produce? A. 2.5 ch. B. 2 ch. C. 4 ch. D. 3 ch.

Description : Assuming a UHF frequency range of 405.0125 MHz to 405.0875 MHz at 25 kHz channeling plan, how many channels can you produce? A. 2.5 ch. B. 2 ch. C. 4 ch. D. 3 ch.

Last Answer : D. 3 ch.

Which frequency band is the standard AM radio broadcast? A. HF B. UHF C. MF D. VHF

Description : Which frequency band is the standard AM radio broadcast? A. HF B. UHF C. MF D. VHF

Last Answer : C. MF

In what range of frequencies are most omnidirectional horizontally polarized antennas used? A. VHF, UHF B. VLF, LF C. SH, EHF D. MF, HF

Description : In what range of frequencies are most omnidirectional horizontally polarized antennas used? A. VHF, UHF B. VLF, LF C. SH, EHF D. MF, HF

Last Answer : A. VHF, UHF

Which band does channel 14 of the television channel belong?A. High VHF band B. EHF band C. UHF band D. Low VHF band

Description : Which band does channel 14 of the television channel belong? A. High VHF band B. EHF band C. UHF band D. Low VHF band

Last Answer : C. UHF band

Channel 7 of the regular television channel belongs to which band? A. Low VHF band B. High VHF band C. Low UHF band D. High UHF band

Description : Channel 7 of the regular television channel belongs to which band? A. Low VHF band B. High VHF band C. Low UHF band D. High UHF band

Last Answer : B. High VHF band

TV channels 2, 4 and 5 are known as ________. A. Mid band UHF B. Low band UHF C. High band VHF D. Low band VHF

Description : TV channels 2, 4 and 5 are known as ________. A. Mid band UHF B. Low band UHF C. High band VHF D. Low band VHF

Last Answer : D. Low band VHF

Troposheric scatter uses the frequencies in the ________ band. A. VLF B. UHF C. VHF D. UF

Description : Troposheric scatter uses the frequencies in the ________ band. A. VLF B. UHF C. VHF D. UF

Last Answer : B. UHF

When was the UHF channel (14-83) of television were added? A. 1852 B. 1904 C. 1947 D. 1952

Description : When was the UHF channel (14-83) of television were added? A. 1852 B. 1904 C. 1947 D. 1952

Last Answer : D. 1952

How far is the visual carrier from the lowest frequency in the spectrum of a monochrome TV broadcast channel following the NTSC standard? A. 1.5 MHz B. 1.25 MHz C. 4.5 MHz D. 0.25 MHz

Description : How far is the visual carrier from the lowest frequency in the spectrum of a monochrome TV broadcast channel following the NTSC standard? A. 1.5 MHz B. 1.25 MHz C. 4.5 MHz D. 0.25 MHz

Last Answer : B. 1.25 MHz

What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Description : What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Last Answer : B. Direct sequence

What is the term used to describe a spread spectrum communications system where the center frequency if a conventional carrier is altered many time per second in accordance with a pseudo-random list of channels? A. Frequency hopping B. Direct sequence C. Time-domain frequency modulation D. Frequency compandored spread spectrum

Description : What is the term used to describe a spread spectrum communications system where the center frequency if a conventional carrier is altered many time per second in accordance with a pseudo ... hopping B. Direct sequence C. Time-domain frequency modulation D. Frequency compandored spread spectrum

Last Answer : A. Frequency hopping

Determine from the following radio frequency that falls under the very high frequency band of the radio spectrum. A. 345.00 MHz B. 144.50 MHz C. 235.50 MHz D. 450.00 MHz

Description : Determine from the following radio frequency that falls under the very high frequency band of the radio spectrum. A. 345.00 MHz B. 144.50 MHz C. 235.50 MHz D. 450.00 MHz

Last Answer : C. 235.50 MHz

The extremely high frequency (EHF) band is in the radio spectrum range of _______. A. 30 to 300 kHz B. 30 to 300 GHz C. 3 to 30 MHz D. 3 to 30 GHz

Description : The extremely high frequency (EHF) band is in the radio spectrum range of _______. A. 30 to 300 kHz B. 30 to 300 GHz C. 3 to 30 MHz D. 3 to 30 GHz

Last Answer : B. 30 to 300 GHz

A radio frequency in the ultra high frequency band of the radio spectrum band. A. 235.50 MHz B. 450.50 MHz C. 150.50 GHz D. 0.31250 GHz

Description : A radio frequency in the ultra high frequency band of the radio spectrum band. A. 235.50 MHz B. 450.50 MHz C. 150.50 GHz D. 0.31250 GHz

Last Answer : D. 0.31250 GHz

Which of the following fall under the high frequency band of the radio spectrum? A. 8.2345 MHz B. 150.50 MHz C. 2.4555 MHz D. 35.535 MHz

Description : Which of the following fall under the high frequency band of the radio spectrum? A. 8.2345 MHz B. 150.50 MHz C. 2.4555 MHz D. 35.535 MHz

Last Answer : A. 8.2345 MHz

The method of determining the bandwidth of any processing system is ______. A. Bandwidth analysis B. Frequency spectrum C. Spectral analysis D. Frequency analysis

Description : The method of determining the bandwidth of any processing system is ______. A. Bandwidth analysis B. Frequency spectrum C. Spectral analysis D. Frequency analysis

Last Answer : C. Spectral analysis

The frequency spectrum of the stereophonic FM signal. A. 67 kHz B. 59.5 to 74.5 kHz C. 19 to 38 kHz D. 30 to 53 kHz

Description : The frequency spectrum of the stereophonic FM signal. A. 67 kHz B. 59.5 to 74.5 kHz C. 19 to 38 kHz D. 30 to 53 kHz

Last Answer : D. 30 to 53 kHz

What is the insertion loss of connector-type splices for a single mode fiber optics? a. 0.51dB b. 0.31dB c. 0.49dB d. 0.38dB

Description : What is the insertion loss of connector-type splices for a single mode fiber optics? a. 0.51dB b. 0.31dB c. 0.49dB d. 0.38dB

Last Answer : d. 0.38dB

What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db

Description : What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db

Last Answer : D. 0.38 db

Insertion loss of connector-type splices for a single-mode fiber cable. A. 0.2 dB B. 0.3 dB C. 0.09 dB D. 0.38 dB

Description : Insertion loss of connector-type splices for a single-mode fiber cable. A. 0.2 dB B. 0.3 dB C. 0.09 dB D. 0.38 dB

Last Answer : D. 0.38 dB

___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug

Description : ___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug

Last Answer : C. Modem

Frequency counters or frequency divihat establishes the value of the current that flows in the output of figure 4-43?

Description : hat establishes the value of the current that flows in the output of figure 4-43?

Last Answer : The frequency of the voltage input.

The DME counters are rotating continuously. This indicates that: a. The DME is unserviceable b. The DME is trying to lock onto range c. The DME is trying to lock onto frequency d. The DME is receiving no response from the ground station

Description : The DME counters are rotating continuously. This indicates that: a. The DME is unserviceable b. The DME is trying to lock onto range c. The DME is trying to lock onto frequency d. The DME is receiving no response from the ground station

Last Answer : b. The DME is trying to lock onto range

The frequency band of the ILS glidepath is: a. UHF b. VHF c. SHF d. VLF

Description : The frequency band of the ILS glidepath is: a. UHF b. VHF c. SHF d. VLF

Last Answer : a. UHF

Which frequency band is a wavelength of 1200m? a. UHF b. LF c. HF d. MF

Description : Which frequency band is a wavelength of 1200m? a. UHF b. LF c. HF d. MF

Last Answer : b. LF

What range of frequencies are usually referred to as the Ultra High Frequency (UHF) Band? w) 3 to 30 Mega Hertz x) 30 to 300 Mega Hertz y) 300 to 3,000 Mega Hertz z) 30,000 to 300,000 Mega Hertz

Description : What range of frequencies are usually referred to as the Ultra High Frequency (UHF) Band? w) 3 to 30 Mega Hertz x) 30 to 300 Mega Hertz y) 300 to 3,000 Mega Hertz z) 30,000 to 300,000 Mega Hertz

Last Answer : ANSWER: Y -- 300 to 3,000 MEGA HERTZ

Frequency in the UHF range propagate by means of

Last Answer : Frequency in the UHF range propagate by means of Space waves.

Oscilloscopes are used to measure what quantities?

Description : Oscilloscopes are used to measure what quantities?

Last Answer : Amplitude, phase, time, and frequency.

List the circuits that all oscilloscopes have in common.

Description : List the circuits that all oscilloscopes have in common.

Last Answer : A CRT, a group of control circuits, power supply, sweep circuitry, and deflection circuitry.

Types of oscilloscopes that are able to retain the display for a longer period of analysis. This display is retained by the use of flood gun.

Description : Types of oscilloscopes that are able to retain the display for a longer period of analysis. This display is retained by the use of flood gun.

Last Answer : storage oscilloscope

A pattern displayed by oscilloscopes which has a steady characteristic is called

Description : A pattern displayed by oscilloscopes which has a steady characteristic is called

Last Answer : Lissajous

Which of the following is not part of the optical spectrum? a. Infrafed b. Ultraviolet c. Visible color d. X-rays

Description : Which of the following is not part of the optical spectrum? a. Infrafed b. Ultraviolet c. Visible color d. X-rays

Last Answer : d. X-rays

What is the spectrum of stereophonic FM signal? A. 19 to 38 kHz B. 30 to 53 kHz C. 59.5 to 74.5 kHz D. 88 to 108 MHz

Description : What is the spectrum of stereophonic FM signal? A. 19 to 38 kHz B. 30 to 53 kHz C. 59.5 to 74.5 kHz D. 88 to 108 MHz

Last Answer : B. 30 to 53 kHz

What is the spectrum range of U600 mastergroup? A. 60 – 108 kHz B. 564 – 3084 kHz C. 312 – 552 kHz D. 60 -2788 kHz

Description : What is the spectrum range of U600 mastergroup? A. 60 – 108 kHz B. 564 – 3084 kHz C. 312 – 552 kHz D. 60 -2788 kHz

Last Answer : B. 564 – 3084 kHz

What device measures rf power by measuring the heat the rf power generates? A. Calorimeter B. Goniometer C. Spectrum meter D. Oscilloscope

Description : What device measures rf power by measuring the heat the rf power generates? A. Calorimeter B. Goniometer C. Spectrum meter D. Oscilloscope

Last Answer : A. Calorimeter

How many voice signals (4 kHz max.) would fit into a 5 MHz spectrum? A. 1250 B. 500 C. 1000 D. 1500

Description : How many voice signals (4 kHz max.) would fit into a 5 MHz spectrum? A. 1250 B. 500 C. 1000 D. 1500

Last Answer : A. 1250

Where does the AM broadcast band located in the spectrum band? A. HF band B. VHF band C. LF band D. MF band

Description : Where does the AM broadcast band located in the spectrum band? A. HF band B. VHF band C. LF band D. MF band

Last Answer : D. MF band

How wide is the spectrum bandwidth of a single GSM carrier? A. 100 kHz B. 200 kHz C. 50 kHz D. 16 kHz

Description : How wide is the spectrum bandwidth of a single GSM carrier? A. 100 kHz B. 200 kHz C. 50 kHz D. 16 kHz

Last Answer : B. 200 kHz

Which tester is used to measure SWR? A. Spectrum analyzer B. Multimeter C. Reflectometer D. Oscilloscope

Description : Which tester is used to measure SWR? A. Spectrum analyzer B. Multimeter C. Reflectometer D. Oscilloscope

Last Answer : C. Reflectometer

What is the full form of BNC ?

Last Answer : Barrel Nut Connector

What components can use the NEC BNCACABLE BNC Component Video Adapter?

Description : What components can use the NEC BNCACABLE BNC Component Video Adapter?

Last Answer : This cable seems to have little function beyond use in NEC video projectors.It's a male HD-15 VGA connector on one end with a 12" cable connecting to a male 5-wire RGBHV BNC connection on the other end.The latter seems to be only used in NEC projectors..