The agreed standard for measuring loudness is the loudness sensation produced by a 1000
Hz sine wave _____ dB above the listener’s threshold of hearing.
A. 80
B. 50
C. 30
D. 40

1 Answer

Answer :

D. 40

Related questions

Description : At what loudness level do pitch (in mels) and frequency (in Hz) are numerically equal? A. 0 dB B. 20 dB C. 60 dB D. 40 dB

Last Answer : D. 40 dB

Description : What loudness level in which permanent damage to hearing is possible? A. 120 dB B. 140 dB C. 130 dB D. 150 dB

Last Answer : D. 150 dB

Description : The loudness level increased from 40 to 56 phons. What is the increase in loudness sensation? A. 3 times B. 4.5 times C. 2 times D. 4 times

Last Answer : A. 3 times

Description : What is the apparent loudness of 80 dB? A. Moderate B. Very loud C. Loud D. Deafening

Last Answer : B. Very loud

Description : A reading of -50 dBm on the disturbing pair, and -80 on the disturbed pair equals _____ dB of crosstalk coupling. A. 20 B. 30 C. 60 D. 25

Last Answer : B. 30

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

Description : For a loudness level between 110 and 120 dB, the maximum daily exposure limit is ____ minute (s). A. 1 B. 60 C. 20 D. 45

Last Answer : A. 1

Description : The sound intensity received from the nearby jet plane is 12.6 µW/m2 and that from another jet plane some distance away is 0.45 µW/m2 . Find the relative loudness of the two. A. 14.0 dB B. 14.5dB C. 12.5 D. 14.5

Last Answer : B. 14.5dB

Description : The equation of 50 Hz current sine wave having r.m.s. value of 60 A is?

Last Answer : (60*√2)Sin(2π*50*t)

Last Answer :  A sine wave has a frequency of 50 Hz. Its angular frequency is 100 n radian/second.

Description : Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW

Last Answer : A. 0.871 μW

Description : What is the standard test tone used for audio measurements? A. 100 Hz B. 500 Hz C. 1000 Hz D. 2000 Hz

Last Answer : C. 1000 Hz

Description : What is considered the threshold of audibility at 3000 Hz? A. 10-12 W/m2 B. 10-16 W/m2 C. 10-12 W/cm2 D. 10-15 W/cm2

Last Answer : A. 10-12 W/m2

Description : What is the typical loudness level of a watch ticking? A. 0 phon B. 40 phons C. 20 phons D. 60 phons

Last Answer : C. 20 phons

Description : What is the quantization signal-to-noise ratio if an 8-bit PCM code is used? A. 40 dB B. 50 dB C. 60 dB D. 65 dB

Last Answer : B. 50 dB

Description : In the American standard, the aural transmitter maximum radiated power is _____ of peak visual transmitter power. A. 10 % B. 30 % C. 20 % D. 40 %

Last Answer : C. 20 %

Description : Three identical circuits having 10 dB signal noise-to-noise ratio each are connected in tandem with each other, what is the overall S/N? A. 5.23 dB B. 14.77dB C. 30 dB D. 40 dB

Last Answer : A. 5.23 dB

Description : What signal-to-noise ratio is required for satisfactory television reception? A. 10 dB B. 30 dB C. 40 dB D. 20 dB

Last Answer : C. 40 dB

Description : The signal to noise ratio that is required for a satisfactory television reception. A. 30 dB B. 40 dB C. 10 dB D. 20 dB

Last Answer : B. 40 dB

Description : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

Last Answer : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

Description : A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Last Answer : B. Over-modulated

Description : What signal-to-noise ratio is required for satisfactory telephone services? A. 50 dB B. 30 dB C. 40dB D. 20 dB

Last Answer : A. 50 dB

Description : You are measuring noise at a -6 dB level point, using the Lenkurt 601A, F1A weighting network, and a flat meter. The meter reading is -59 dBm. This is _________ dBa0. A. 24 B. 12 C. 23 D. 32

Last Answer : D. 32

Description : You are measuring noise at a +3 dB level point, using the Lenkurt 601A, F1A weighting network, and a flat meter. The meter reading is -57dBm. This is ________dBa0. A. 20 B. 15 C. 25 D. 17

Last Answer : C. 25

Description : You are measuring noise in a voice channel at 7 dB test point level. The meter reads -56 dBm (FIA weighted). What is the reading in dBrnc? A. 20 B. 32 C. 35 D. 25

Last Answer : C. 35

Description : You are measuring a voice channel at a -4 dB test point level, the meter reads -73 dBm (pure test tone) convert the reading in dBmCO. A. 16 B. 18 C. 22 D. 12

Last Answer : C. 22

Description : In measuring noise in a voice channel at a 4 dB test point level, the meter reads -70 dBm (F1A weighted), convert the reading to pWp. A. 53 B. 93 C. 63 D. 83

Last Answer : B. 93

Description : My daughter needs the most user friendly phone services for hearing impaired listeners.?

Last Answer : The Federal Relay is a good phone service for the hearing impaired. They are a governmental run company so they are the most trusted of these types of phone service providers.

Description : If an antenna has a gain of 3 dB, it increases the output of the transmitter by A. 10,000 times B. 1000 times C. 100 times D. 1 million times

Last Answer : B. 1000 times

Description : Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Last Answer : D. B and C above

Description : What is the reference frequency of CCIT phosphomeric noise measurement? A. 800 Hz B. 1000 Hz C. 1500 Hz D. 3400 Hz

Last Answer : A. 800 Hz

Description : A frequency of 3000 Hz has how many octaves above 1000 Hz? A. 1.6 octaves B. 2.1 octaves C. 1 octave D. 3 octaves

Last Answer : A. 1.6 octaves

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz

Description : What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s

Last Answer : D. 1.6 to 1.8 s

Description : What is the reference frequency of CCITT psophometric noise measurement? A. 800 Hz B. 1500 Hz C. 3400 Hz D. 1000 Hz

Last Answer : A. 800 Hz

Description : The standard deviation of the variation in the transmission loss of a circuit should not exceed A. 3 dB B. 1 dB C. 5 dB D. 0.5dB

Last Answer : B. 1 dB

Description : The standard test tone A. 0dB B. 10 dBm C. 0 dBm D. 10 dB

Last Answer : C. 0 dBm

Description : ECE Board Exam March 1996 The power of standard test tone is normally ____________. A. 1 dB B. 0 mW C. 1 mW D. 1 W

Last Answer : C. 1 mW

Description : What is the number of levels required in a PCM system with S/N ratio of 40 dB? A. 64 B. 128 C. 256 D. 512

Last Answer : B. 128

Description : What is the photon energy for an infrared wave with frequency of 1012 Hz? a. 10.6 x 1034 joules b. 6.63 x 10-34 joules c. 6.63 x 10-22 joules d. 10.6 x 1022 joules

Last Answer : c. 6.63 x 10-22 joules

Description : What is the frequency of a 2-cm sound wave in sea water at 25˚C? A. 76 kHz B. 76 Hz C. 76 MHz D. 76 mHz

Last Answer : A. 76 kHz

Description : What is affected by the distance between the listener and the source of the sound because the intensity varies inversely with the square of the distance? A. Volume B. Pitch C. Loudness D. Frequency

Last Answer : C. Loudness

Description : What is typical loudness level of an acoustic guitar 1 foot away? A. 60dB B. 100dB C. 80dB D. 40dB

Last Answer : C. 80dB

Description : If the loudness level is 100 phons, what is this in sone unit? A. 100 B. 90 C. 106 D. 96

Last Answer : C. 106

Description : The sound energy per unit area at right angles to the propagation direction per unit time. A. Sound intensity B. Loudness C. Coherence D. Sound stress

Last Answer : A. Sound intensity

Description : ____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Last Answer : B. Sound intensity

Description : ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of ... A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation

Last Answer : A. pulse duration modulation

Description : Refers to a continuous tone generated in a local exchange terminal through a combination of two frequencies 350 Hz, and 440 Hz. A. Busy tone B. Call waiting tone C. Dial tone D. Standard tone

Last Answer : B. Call waiting tone

Description : What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Last Answer : D. 300-3400 Hz

Description : ____________ is the out-of-band signaling between toll central offices (Bell System Standard) A. 2,000 Hz B. 800 Hz C. 3,835 Hz D. 3700 Hz

Last Answer : D. 3700 Hz