In a triple conversion superheterodyne receiver, diode mixer stages are operated
A. In the linear region
B. In the nonlinear region
C. As class A amplifiers
D. As class B amplifiers

1 Answer

Answer :

B. In the nonlinear region

Related questions

Description : What consists the front-end circuit of a VHF TV superheterodyne receiver? A. Mixer, RF amplifier and AFC? B. RF amplifier, Band pass filter and mixer C. Local oscillator, mixer and RF amplifier D. Local oscillator, AGC and antenna

Last Answer : C. Local oscillator, mixer and RF amplifier

Description : Refers to one of the front end circuit of a VHF TV superheterodyne receiver which is usually a separate circuit coupled to the mixer. A. Antenna feed B. AGC C. RF amplifier D. Local oscillator

Last Answer : D. Local oscillator

Description : After the IF stages have been aligned, the next stage to align in FM receiver is. A. local oscillator B. limiter stage C. RF amplifier D. mixer stage

Last Answer : A. local oscillator

Description : Indicate the false statement. A. HF mixer are generally noisier than HF amplifiers. B. Impulse noise voltage is dependent on bandwidth C. Thermal noise is independent of the frequency at which is measured. D. Industrial noise is usually of the impulse type.

Last Answer : B. Impulse noise voltage is dependent on bandwidth

Description : Which circuit contributes most of the noise in a receiver? A. IF amplifier B. Demodulator C. AF amplifier D. Mixer

Last Answer : D. Mixer

Description : What establishes the receiver bandwidth? A. RF amplifier B. Mixer C. Local oscillator D. IF amplifier

Last Answer : D. IF amplifier

Description : Referred to as the stage in the radio receiver that contributes most of the noise. A. IF amplifier B. Supply stage C. Speaker D. Mixer

Last Answer : D. Mixer

Description : In an FM receiver, which circuit removes amplitude variations? A. Exciter B. Mixer C. Discriminator D. Limiter

Last Answer : D. Limiter

Description : Cross modulation on a receiver is eliminated at the A. RF stage B. mixer stage C. IF stage D. detector stage

Last Answer : D. detector stage

Description : What two components give a ssb receiver its advantages over an AM superheterodyne receiver?

Last Answer : A special type of detector and a carrier reinsertion oscillator

Description : A superheterodyne radio receiver with an IF of 455KHZ is turned to 1000KHZ. Find: (i) Image frequency (ii) Local oscillator frequency

Last Answer : Given Intermediate Frequency fi=455KHz Signal frequency =fs=1000KHz Local oscillator frequency fo=fs+fi  Fo=1000KHz+455KHz  =1455KHz Image frequency is the input frequency which produces the same intermediate frequency fsi=fs+2fi  =1000KHz+2*455KHz  =1910KHz 

Description : State two disadvantages of TRF receiver over superheterodyne receiver.

Last Answer : Disadvantages of TRF Receiver: 1. Instability due to oscillatory nature of RF amplifier. 2. Variation in bandwidth over tuning range. 3. Insufficient selectivity at high frequencies 4. Poor adjacent channel rejection capability 

Description : When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Last Answer : D. internal receiver noise.

Description : Which of the following is used as an optical receiver in fiber optics communications a. APD b. Tunnel diode c. Laser diode d. LED

Last Answer : a. APD

Description : Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Last Answer : B. Circulator

Description : Why are frequency modulation transmitters more efficient? A. Because their power is increased by class C amplifiers B. Because their power is increased by class A amplifiers C. Because their power is increased by class B amplifiers D. Because their power is increased by class AB amplifiers

Last Answer : A. Because their power is increased by class C amplifiers

Last Answer : A Zener diode is operated in the Breakdown Region 

Description : What is is the different between a linear scale and a nonlinear scale?

Last Answer : Feel Free to Answer

Description : Is the function y8x linear or nonlinear?

Last Answer : linear

Description : Is y-83 plus x7 linear or nonlinear?

Last Answer : linear

Description : The elastic stress strain behavior of rubber is A. Linear B. Nonlinear C. Plastic D. No fixed relationship

Last Answer : B. Nonlinear

Description : Neural Networks are complex ______________ with many parameters. a) Linear Functions b) Nonlinear Functions c) Discrete Functions d) Exponential Functions

Last Answer : a) Linear Functions

Description : Neural Networks are complex ______________with many parameters. a) Linear Functions b) Nonlinear Functions c) Discrete Functions d) Exponential Functions

Last Answer : b) Nonlinear Functions

Description : We can divide coding schemes intotwobroad categories: ________ and______coding. A) block; linear B) linear; nonlinear C) block; convolution D) none of the above

Last Answer : block; convolution

Description : The electric flux density and electric field intensity have which of the following relation? a) Linear b) Nonlinear c) Inversely linear d) Inversely nonlinear

Last Answer : a) Linear

Description : Neural Networks are complex ———————–with many parameters. a) Linear Functions b) Nonlinear Functions c) Discrete Functions d) Exponential Functions e) Power Functions

Last Answer : b) Nonlinear Functions

Description : Neural Networks are complex ______________ with many parameters. a) Linear Functions b) Nonlinear Functions c) Discrete Functions d) Exponential Functions

Last Answer : a) Linear Functions

Description : Compare linear and nonlinear wave shaping circuits.

Last Answer : Sr. No. Linear Wave shaping Circuit Non Linear Wave shaping Circuits 1 The circuit which makes use of only linear circuit elements is known as linear wave shaping circuits. The circuit which ... for the circuits 4 E.g. Integrator, Differentiator E.g. Clipper, Clamper

Description : For a body moving with non-uniform velocity and uniform acceleration (1) Displacement – Time graph is linear (2) Displacement – Time graph is non-linear (3) Velocity – Time graph is nonlinear (4) Velocity – Time graph is linear

Last Answer : Displacement – Time graph is non-linear

Description : If you have available number of power amplifiers with a gain of 100 each, how many such amplifiers do you need to cascade to give an overall gain of 60 dB? A. 3 B. 4 C. 5 D. 2

Last Answer : A. 3

Description : What are feed back amplifiers?

Last Answer : Amplifiers which uses feed back principle is called as feed back amplifiers.

Description : How are amplifiers classified according to the transistor configuration?

Last Answer : 1. Common emitter amplifier 2. Common base amplifier 3. Common collector amplifier

Description : How are amplifiers classified according to the input?

Last Answer : 1. Small – signal amplifier 2. Large – signal amplifier

Description : List the applications of Log amplifiers:

Last Answer : 1.Analog computation may require functions such as lnx, log x, sin hx etc. These functions can be performed by log amplifiers 2.Log amplifier can perform direct dB display on digital voltmeter and spectrum analyzer 3.Log amplifier can be used to compress the dynamic range of a signal

Description : Which of the following clay mixing devices is vacuum operated for deairation of clay? (A) Banbury mixer (B) Pug mill (C) Muller-mixer (D) None of these

Last Answer : (B) Pug mill

Description : The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Last Answer : B. bandpass filter

Description : Which of the following is not usually a part of a transponder are defined by the A. LNA B. Mixer C. Modulator D. HPA

Last Answer : C. Modulator

Description : What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Last Answer : C. 2225 MHz

Description : What mixer type has the lowest spurious signals? A. Double-balanced B. Single-balanced C. Super-heterodyner D. Heterodyner

Last Answer : A. Double-balanced

Description : Which of the following is the basic synthesizer circuit? A. Frequency divider B. Frequency multiplier C. PLL D. Mixer

Last Answer : C. PLL

Description : Describe the functions of mixer and local oscillator in radio receiver

Last Answer : Frequency Mixer:- The function of frequency mixer is to heterodyne signal frequency fs and local oscillator frequency fo. At the output, it produces the difference frequency known as ... local oscillator frequency fo is then mixed with incoming frequency to give intermediate frequency. 

Description : The conversion of the throttle command voltage to the signal necessary to achieve the desired shaft RPM is accomplished by the _____________. A. ahead or astern function generator of the ... circuit C. operational amplifiers in the autorotation circuit D. long time constant amplifier circuit

Last Answer : Answer: A

Description : What is the capture area of a dipole operated at 75 MHz? A. 4 mm B. 2 m2 C. 2.088 m2 D. 4.088 m2

Last Answer : C. 2.088 m2

Description : What are two conditions under which diode is operated?

Last Answer : Need answer

Last Answer : A Zener diode is operated in the Reverse bias around the knee of breakdown region mode as a voltage stabilizer.

Description : The signal path from satellite to earth-based receiver. A. Downlink signal B. Uplink signal C. Incident signal D. Reflected signal

Last Answer : A. Downlink signal

Description : The total propagation delay time from transmission to reception of signals from a ground transmitter to ground receiver with angle of elevation at 10 degrees respectively is A. 273 ms B. 239 ms C. 275 ms D. 260 ms

Last Answer : A. 273 ms

Description : Which of the following is not a typical output from a GPS receiver? A. Latitude B. Speed C. Altitude D. Longitude

Last Answer : B. Speed

Description : What is the delay time for satellite transmissions from earth transmitter to earth receiver? A. 0.5 s B. 1s C. 5 ms D. 0.25 s

Last Answer : A. 0.5 s