Why are frequency modulation transmitters more efficient? A. Because their power is increased by class C amplifiers B. Because their power is increased by class A amplifiers C. Because their power is increased by class B amplifiers D. Because their power is increased by class AB amplifiers

Why are frequency modulation transmitters more efficient?
A. Because their power is increased by class C amplifiers
B. Because their power is increased by class A amplifiers
C. Because their power is increased by class B amplifiers
D. Because their power is increased by class AB amplifiers
by

1 Answer

Answer :

A. Because their power is increased by class C amplifiers
by

Related questions

How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator or ferrite isolator in the feed line of the transmitter and duplexer C. By using a class C final amplifier with high driving power D. By installing a low-pass filter in the antenna feed line

Description : How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator ... high driving power D. By installing a low-pass filter in the antenna feed line

Last Answer : A. Through installing a band-pass filter in the antenna feed line

When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Description : When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Last Answer : D. final RF stage

Indicate the false statement. A. HF mixer are generally noisier than HF amplifiers. B. Impulse noise voltage is dependent on bandwidth C. Thermal noise is independent of the frequency at which is measured. D. Industrial noise is usually of the impulse type.

Description : Indicate the false statement. A. HF mixer are generally noisier than HF amplifiers. B. Impulse noise voltage is dependent on bandwidth C. Thermal noise is independent of the frequency at which is measured. D. Industrial noise is usually of the impulse type.

Last Answer : B. Impulse noise voltage is dependent on bandwidth

Compare Class A ,Class B, Class C and class AB power amplifiers on the basis of: i)Angle of conduction ii)Efficiency iii)Position of operating pointing power dissipation iv)Distortion

Description : Compare Class A ,Class B, Class C and class AB power amplifiers on the basis of: i)Angle of conduction ii)Efficiency iii)Position of operating pointing power dissipation iv)Distortion

Last Answer : Compare Class A ,Class B, Class C and class AB power amplifiers on the basis of: i)Angle of conduction ii)Efficiency iii)Position of operating pointing power dissipation iv)Distortion

What is the difference between phase and frequency modulation? A. Is purely theoretical because they are the same in practice B. Lies in poorer audio response of phase modulation C. Lies in the different definitions of the modulation index D. Is too great to make two systems compatible

Description : What is the difference between phase and frequency modulation? A. Is purely theoretical because they are the same in practice B. Lies in poorer audio response of phase modulation C. Lies in the different definitions of the modulation index D. Is too great to make two systems compatible

Last Answer : C. Lies in the different definitions of the modulation index

In a triple conversion superheterodyne receiver, diode mixer stages are operated A. In the linear region B. In the nonlinear region C. As class A amplifiers D. As class B amplifiers

Description : In a triple conversion superheterodyne receiver, diode mixer stages are operated A. In the linear region B. In the nonlinear region C. As class A amplifiers D. As class B amplifiers

Last Answer : B. In the nonlinear region

It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation, taken under the normal operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Description : It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation ... operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Last Answer : C. Mean power

Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Description : Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Last Answer : A. Carrier power

Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Description : Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Last Answer : C. Carrier power

If you have available number of power amplifiers with a gain of 100 each, how many such amplifiers do you need to cascade to give an overall gain of 60 dB? A. 3 B. 4 C. 5 D. 2

Description : If you have available number of power amplifiers with a gain of 100 each, how many such amplifiers do you need to cascade to give an overall gain of 60 dB? A. 3 B. 4 C. 5 D. 2

Last Answer : A. 3

What is the term used in telephony and telegraphy for irregular disturbing radiation due to various causes and in a particular produced by arc transmitters causing a rushing sound in receiving telephones? A. Fax tone B. Mush C. Hiss D. Crosstalk

Description : What is the term used in telephony and telegraphy for irregular disturbing radiation due to various causes and in a particular produced by arc transmitters causing a rushing sound in receiving telephones? A. Fax tone B. Mush C. Hiss D. Crosstalk

Last Answer : B. Mush

What is the process of cancelling the effect on internal device capacitance in radio transmitters? A. Degaussing B. Neutralization C. Ionization D. Stabilization

Description : What is the process of cancelling the effect on internal device capacitance in radio transmitters? A. Degaussing B. Neutralization C. Ionization D. Stabilization

Last Answer : B. Neutralization

Which of the following antennas is used for testing and adjusting a transmitter for proper modulation, amplifier operation and frequency accuracy? A. Elementary B. Real C. Isotropic D. Dummy

Description : Which of the following antennas is used for testing and adjusting a transmitter for proper modulation, amplifier operation and frequency accuracy? A. Elementary B. Real C. Isotropic D. Dummy

Last Answer : D. Dummy

What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66

Description : What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66

Last Answer : D. 1.66

What is the term used to describe a spread spectrum communications system where the center frequency if a conventional carrier is altered many time per second in accordance with a pseudo-random list of channels? A. Frequency hopping B. Direct sequence C. Time-domain frequency modulation D. Frequency compandored spread spectrum

Description : What is the term used to describe a spread spectrum communications system where the center frequency if a conventional carrier is altered many time per second in accordance with a pseudo ... hopping B. Direct sequence C. Time-domain frequency modulation D. Frequency compandored spread spectrum

Last Answer : A. Frequency hopping

What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

In modulation technique, which of the following is referred to audible pitch? A. Width B. Frequency C. Harmonic D. Amplitude

Description : In modulation technique, which of the following is referred to audible pitch? A. Width B. Frequency C. Harmonic D. Amplitude

Last Answer : B. Frequency

What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the average audio modulating frequency C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency

Description : What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the ... audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency

Last Answer : C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency

This is referred to a product of simultaneous frequency and amplitude modulation or a carrier frequency variation which produces unwanted distortion. A. Absorption modulation B. Simultaneous modulation C. Dynamic instability D. Series modulation

Description : This is referred to a product of simultaneous frequency and amplitude modulation or a carrier frequency variation which produces unwanted distortion. A. Absorption modulation B. Simultaneous modulation C. Dynamic instability D. Series modulation

Last Answer : C. Dynamic instability

One of the following is not among the advantages of series modulation A. No transformer B. Suppressed white noise C. Simple.D. Modulates any frequency

Description : One of the following is not among the advantages of series modulation A. No transformer B. Suppressed white noise C. Simple D. Modulates any frequency

Last Answer : B. Suppressed white noise

Which of the following systems is not used in radio detection and ranging? A. Frequency shift B. Frequency modulation C. Pulse radar D. Amplitude modulation

Description : Which of the following systems is not used in radio detection and ranging? A. Frequency shift B. Frequency modulation C. Pulse radar D. Amplitude modulation

Last Answer : D. Amplitude modulation

The modulation technique used by GSM cellular system A. Phase shift keying B. Frequency shift keying C. Gaussian minimum shift keying D. QAM

Description : The modulation technique used by GSM cellular system A. Phase shift keying B. Frequency shift keying C. Gaussian minimum shift keying D. QAM

Last Answer : C. Gaussian minimum shift keying

Used for time division multiplexing. A. Frequency modulation B. Pulsed modulation C. SSB D. Amplitude modulation

Description : Used for time division multiplexing. A. Frequency modulation B. Pulsed modulation C. SSB D. Amplitude modulation

Last Answer : B. Pulsed modulation

Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Description : Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Last Answer : C. Out of the band

A good example of a pilot tone system used in commercial frequency modulation stations. A. FDM B. Time division C. Stereo multiplexing D. Frequency modulation

Description : A good example of a pilot tone system used in commercial frequency modulation stations. A. FDM B. Time division C. Stereo multiplexing D. Frequency modulation

Last Answer : C. Stereo multiplexing

Both frequency and phase modulation utilize ________ modulation A. Phase B. AM and FM C. Digital D. Angle

Description : Both frequency and phase modulation utilize ________ modulation A. Phase B. AM and FM C. Digital D. Angle

Last Answer : D. Angle

Which determines the number of sideband components of FM? A. Modulation frequency B. Modulation index C. Carrier frequency D. All of these

Description : Which determines the number of sideband components of FM? A. Modulation frequency B. Modulation index C. Carrier frequency D. All of these

Last Answer : B. Modulation index

The ratio of the level of the modulated output of a transmitter under conditions of standard test modulation to the level of the demodulated output with no modulation applied both measured with the same bandwidth. A. Reference audio output B. None of these C. Audio frequency response D. Residual noise level

Description : The ratio of the level of the modulated output of a transmitter under conditions of standard test modulation to the level of the demodulated output with no modulation applied both measured with the ... . Reference audio output B. None of these C. Audio frequency response D. Residual noise level

Last Answer : D. Residual noise level

What is the main purpose of a communications system? A. None of these B. To have a frequency assignment C. For modulation D. To provide an acceptable replica of the information at the destination

Description : What is the main purpose of a communications system? A. None of these B. To have a frequency assignment C. For modulation D. To provide an acceptable replica of the information at the destination

Last Answer : D. To provide an acceptable replica of the information at the destination

ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Description : ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Last Answer : A. frequency-shift keying

The amplifiers following the modulated stage in a low level modulation AM system be

Description : The amplifiers following the modulated stage in a low level modulation AM system be  (A) linear amplifier (B) harmonic generators (C) class C power amplifiers (D) class untuned amplifiers

Last Answer : The amplifiers following the modulated stage in a low level modulation AM system be class C power amplifiers

The final power amplifier in an FM transmitter usually operates class ______. A. AB B. C C. B D. A

Description : The final power amplifier in an FM transmitter usually operates class ______. A. AB B. C C. B D. A

Last Answer : B. C

What are feed back amplifiers?

Description : What are feed back amplifiers?

Last Answer : Amplifiers which uses feed back principle is called as feed back amplifiers.

How are amplifiers classified according to the transistor configuration?

Description : How are amplifiers classified according to the transistor configuration?

Last Answer : 1. Common emitter amplifier 2. Common base amplifier 3. Common collector amplifier

How are amplifiers classified according to the input?

Description : How are amplifiers classified according to the input?

Last Answer : 1. Small – signal amplifier 2. Large – signal amplifier

List the applications of Log amplifiers:

Description : List the applications of Log amplifiers:

Last Answer : 1.Analog computation may require functions such as lnx, log x, sin hx etc. These functions can be performed by log amplifiers 2.Log amplifier can perform direct dB display on digital voltmeter and spectrum analyzer 3.Log amplifier can be used to compress the dynamic range of a signal

A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Description : A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Last Answer : D. Both A and C above

An AM transmitter is rated 100W at 100% modulation. How much power required for the carrier? A. 33.33 W B. 66.66 W C. 83.33 W D. 100 W

Description : An AM transmitter is rated 100W at 100% modulation. How much power required for the carrier? A. 33.33 W B. 66.66 W C. 83.33 W D. 100 W

Last Answer : B. 66.66 W

100% modulation in AM means a corresponding increase in total power by: A. 25% B. 75% C. 100% D. 50%

Description : 100% modulation in AM means a corresponding increase in total power by: A. 25% B. 75% C. 100% D. 50%

Last Answer : D. 50%

Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Description : Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Last Answer : A. 1.0025 MHz

How does one reconcile the left's commonsense narrative of manmade global warming with the History Channel's assertion that the world's 5 known Extremely Low Frequency (ELF) transmitters can "potentially alter the weather anywhere in the world"*?

Description : How does one reconcile the left's commonsense narrative of manmade global warming with the History Channel's assertion that the world's 5 known Extremely Low Frequency (ELF) transmitters can "potentially alter the weather anywhere in the world"*?

Last Answer : this is why i wear a tinfoil hat

What would happen if you plugged an FM transmitter into a radio's headphone jack and set the radio to the transmitter's transmitting frequency?

Description : What would happen if you plugged an FM transmitter into a radio's headphone jack and set the radio to the transmitter's transmitting frequency?

Last Answer : You would get a positive feedback loop, probably resulting in an audible tone. The amplitude would be limited by the transmitter’s modulation limiter, so all you’d have is a very ordinary oscillator.

Which circuit is most common to both frequency-hopping and direct-sequence spread spectrum transmitters?

Description : Which circuit is most common to both frequency-hopping and direct-sequence spread spectrum transmitters?

Last Answer : PSN code generator

If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease

Description : If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease

Last Answer : D. decrease

If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its resonant frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Description : If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its ... frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Last Answer : C. its resonant frequency will be increased

What modulation is normally used with digital data? A. AM B. FM C. SSB D. QPSK

Description : What modulation is normally used with digital data? A. AM B. FM C. SSB D. QPSK

Last Answer : D. QPSK

What type of modulation is used on voice and video signals? A. AM B. FM C. SSB D. QPSK

Description : What type of modulation is used on voice and video signals? A. AM B. FM C. SSB D. QPSK

Last Answer : B. FM

The receive GCE system in an earth station performs what function(s)? A. Modulation and multiplexing B. Up conversion C. Demodulation and demultiplexing D. Down conversion

Description : The receive GCE system in an earth station performs what function(s)? A. Modulation and multiplexing B. Up conversion C. Demodulation and demultiplexing D. Down conversion

Last Answer : C. Demodulation and demultiplexing

The antenna current is doubled when the modulation index is doubled in ______ AM system. A. A5C B. A3J C. A3 D. A3H

Description : The antenna current is doubled when the modulation index is doubled in ______ AM system. A. A5C B. A3J C. A3 D. A3H

Last Answer : B. A3J

A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Description : A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Last Answer : B. Over-modulated