List the types of hydro power plants based on availability of head

1 Answer

Answer :

1. High head power plant(head>100m)  2. Medium head power plant(30m-100m)  3. Low head power plants(head<30m)

Related questions

Description : What are the essential elements of hydro power plant?

Last Answer : 1. Catchment area 2. Reservoir 3. Dam 4. Surge tanks 5. Draft tubes 6. Power house 7. Switched for transmission of power

Description : Explain reaction turbine in terms of head:

Last Answer : High head- Francis Medium head- Propeller Low head- Kaplan

Description : What is meant by pumped storage power plant?

Last Answer : The pumped storage plants are used for load balancing. During peak load water is used to work on turbines to produce electricity. Water after working in turbines is stored in the tail race reservoir.

Description : What is power house?

Last Answer : A power house is a stable structure which houses the equipment in the power plant

Description : Write about prime movers?

Last Answer : Prime mover converts the kinetic energy of water into mechanical energy to produce electrical energy. Pelton wheel turbine, Francis turbine, Kaplan turbine and Propeller turbine are prime movers used in hydraulic power plants.

Description : What is the use of spill Ways?

Last Answer : Spillway is like a safety valve of the dam. It discharges major flood without damaging the dam. It keeps the reservoir level below the maximum level allowed.

Description : Explain about penstock?

Last Answer : The pipe between surge tank and prime mover is known as penstock. It is designed to withstand high pressure. It is made up of reinforced concrete. In very cold areas, the penstock is buried to prevent ice formation and to reduce the expansion joints.

Description : What is the function of Fore bay?

Last Answer : Fore bay is considered as naturally provided surge tank. It is temporary water storage when the load on the plant is reduced and provides water for initial increment on increasing load.

Description : What is the use of surge tank?

Last Answer : The surge tank is used to provide better regulation of water pressure in the system. The surge tank controls the water when the load on the turbine decreases and supplies water when the ... variations resulting from the rapid changes in water flow in penstock and hence prevents water hammer.

Description : Why trash rack is used?

Last Answer : The trash rack is used to prevent the entry of debris, which might damage the turbine runners and chock up the nozzle of impulse turbine.

Description : What is the main purpose of the dam?

Last Answer : The main purpose of the dam is to increase the height of water level and also to increase the working head of the hydraulic power plant.

Description : What is the main purpose of the reservoir?

Last Answer : The main purpose of reservoir is to store water received from catchments areas during the rainy seasons and supply the same during the dry season.

Description : What is meant by catchment area and explain its function:

Last Answer : The whole area behind the dam is called the catchment area. The rain water in the area will be drained into the dam through a dam or river.

Description : List the various types of diesel plants.

Last Answer : Based on number of strokes: (a) Two stroke diesel engine (b) Four srtoke diesel engine Based on orientation: (a) Horizontal diesel engine (b) Vertical diesel engine Based on number of ... (a) single cylinder (b) Multi cylinder And other type like naturally aspirated, superheated etc.,

Description : What are different types of Steam boilers used in Thermal Power Plants?

Last Answer : Different type of boiler used in thermal power plants are: Fire tube boiler Water tube boiler Natural Circulation boiler Forced Circulation boiler Once through boiler

Description : List the types of super heaters:

Last Answer : 1. Radiant super heater- absorb heat by radiation 2. Convention super heater-absorb heat via a fluid 3. Separately fixed super heaters- it is totally separated from the boiler

Description : List any four applications of diesel power plant.

Last Answer : 1. Used as peak load plants 2. Suitable for mobile plants 3. Used as standby units 4. Used as emergency plant

Description : List the components of diesel power plant.

Last Answer : 1.Diesel engine 2. Air intake system 3. Exhaust system 4. Fuel system 5. Cooling system 6. Lubricating system 7. Starting of engine

Description : List the factors to be considered while choosing a site for steam power station:

Last Answer : 1.Supply of fuel 2.Availability of water 3.Transportation facilities 4.Cost and type of land 5.Nearness to load centres 6.Distance from populated area

Description : Define draught, what is the use of draught in thermal power plants?

Last Answer : Draught is defined as a small pressure difference required between the fuel bed (furnace) and outside air to maintain constant flow of air and to discharge the gases through chimney to the atmosphere. ... combustion products through the system. · To remove burnt products from the system

Description : What consists of cooling water circuit and coal & ash circuit in steam power plant?

Last Answer : The cooling water circuit consists of a pump, condenser and cooling tower. The coal and ash circuit consists of coal delivery, preparation of coal, handling of coal to the boiler furnace, ash handling and ash storage.

Description : What consists of feed water and steam flow circuit in steam power?

Last Answer : The feed water and steam flow circuit consists of feed pump, economizer boiler drum super heater, turbine and condenser.

Description : Name the four major circuits in steam power plant.

Last Answer : • Coal and ash circuit • Air and flue gas circuit • Feed water and steam circuit • Cooling water circuit

Description : Explain the working of thermal power plant.

Last Answer : It uses coal as the primary fuel to boil the water available to superheated steam for driving the steam turbine. The steam turbine is then mechanically coupled to an alternator rotor, the rotation of which results in the generation of electric power.

Description : What are the working fluids in gas turbine?

Last Answer : 1.Air 2.Helium 3.Argon 4.Carbon dioxide

Description : What is the function of coolant?

Last Answer : Heat is absorbed by the coolant that is produced in the reactor. Typical coolants are water, carbon dioxide gas or liquid sodium.

Description : What is the function of shielding?

Last Answer : Shielding prevents radiations to reach outside the reactor. Lead blocks and concrete enclosure that is strong enough of several meters thickness are used for shielding.

Description : What is the function of control rod in nuclear reactor?

Last Answer : These rods absorb neutrons and stop the chain reaction to proceed further.. Some control rods are made from an alloy of silver and cadmium. Some are made from boron mixed with iron or carbon. ... happens and the reactor gets colder.The control rods can used to shut the reactor down completely.

Description : Define water as moderator.

Last Answer : Neutrons from fission have very high speeds and must slowed greatly by water moderation to maintain the chain reaction.

Description : what is function of Moderator in nuclear reactor?

Last Answer : The moderator is a material which slows down the speed of the neutrons. The moderator is usually made from water but some reactors use graphite also.Neutrons released from the chain reaction must be ... moderator slows the neutrons down so that they can be captured and keep the chain reaction going.

Description : Which is the nuclear fuel used ?

Last Answer : The commonly used fuels are Uranium, Plutonium or Thorium. It can be U-235, U-238, Pu-236 or Th-232. Uranium is mostly preferred as it has high melting point.

Description : Name the different components of nuclear reactor?

Last Answer : 1. Nuclear fuel 2. Moderator 3. Control rods 4. Reflectors 5. Reactor vessel 6. Biological shielding 7. Coolant

Description : Write about classification of draught?

Last Answer : Draught is classified as 1. Natural draught 2. Artificial draught

Description : What is the working principle of Cooling Towers?

Last Answer : The hot water is sprayed from the top of the tower, while the air is made to flow from the bottom of the tower to the top. This air cools the hot water in the cooling tower. Air vaporises ... and leaves at the top of the tower and cooled water leaves at the bottom and recirculated to the condenser.

Description : What is meant by cooling Towers?

Last Answer : It is a tower or building like device in which atmospheric air circulates in direct or indirect contact with warmer water and water is thereby cooled. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid

Description : What consists of air and flue gas circuit?

Last Answer : Air and flue gas circuit consists of forced draught fan, air-pre-heater, boiler, furnace, super heater, economizer, dust collector, induced draught fan and chimney.

Description : What is the function of Air preheater?

Last Answer : Air pre heater is used to transfer heat from the flue gases to the air before it passes into the furnace for combustion thereby increasing the thermal efficiency of the process.

Description : What is an Economizer?

Last Answer : An economizer is a mechanical device which is used as a heat exchanger by preheating water by recovering residual heat from the flue gases in thermal power plant.

Description : What is superheater?

Last Answer : A superheater is a device used to convert saturated steam or wet steam into dry steam

Description : Why the preparation of coal is necessary?

Last Answer : The coal from coal nines cannot be directly fed into the furnace. Proper preparation of coal should be done before feeding the coal to the furnace. In the coal preparation, the coal passes through the different equipments like 1.Crushers 2. Sizers 3. Driers and Magnetic Separators.

Description : List any two types of micro-hydro power plants. 

Last Answer : A) base on use - Conventional plants Pumped storage plants Run-of-river plants. B) based on size - Large hydro power plants (capacity more than 100MW) Medium hydro power plants (capacity 15 ... Micro hydro power plants (capacity 5KW to 100KW) Pico hydro power plants (capacity less than 5 KW)

Description : With a neat diagram explain medium head hydro-electric power plants. 

Last Answer : Diagram of medium head hydro-electric power plants:  Explanation:- If head of water is between 30 and 100 m, the plant is called a medium-head plant. Potential energy of ... Francis turbines are normally used. Alternator required in these plants is of low speed and large in diameter. 

Description : In Jaitapur, which one of the following power plants is being set up? [Haryana Gr Bank PO 2011] (1) Coal based (2) Hydro-electric (3) Gas based (4) Nuclear based (5) None of these

Last Answer : Ans: (4) 40. In which one of the following States, Mangla, Bhagyam and Aishwarya oil fields are located? [Haryana Gr Bank PO 2011] (1) Assam (2) Gujarat (3) A.P. (4) Orissa (5) Rajasthan

Description : List the types of turbine used in hydro power plant.  

Last Answer : Following types of turbine used in hydro power plant:  1.Pelton wheel 2.Francis Turbine 3.Kaplan Turbine 4.Propeller Turbine 

Description : Classify the hydro-electric plants according to the head and load basis.  

Last Answer : Classification the hydro-electric plants According to availability of Head of Water:  1. Very high head power plant 2. High head power plant 3. Medium head power plant 4. Low head power plant  ... -electric plants According to Load basis:   1. Base load power plant 2. Peak load power plant

Description : Which type of pole generators are used in Hydro-electric plants and why?

Last Answer : A: As the speed of operation is low for hydro turbines used in Hydro-electric plants, salient pole type Synchronous generators are used. These allow better ventilation and also have other advantages over smooth cylindrical type rotor.They have more diameter and less axial length.

Description : The power generation potential in mini hydro power plant for a water flow of 3 m3 /sec with a head of 14 meters and with a system efficiency of 55% is a) 226.6 kW b) 76.4 kW c) 23.1 kW d) none of the above

Last Answer : a) 226.6 kW

Description : The cost of fuel transportation is maxmimun in........ A.Hydro-electric power plant B.Steam power plant C.Nuclear power plant D.90% - 95%

Last Answer : Ans: B

Description : Classify hydro-electric power plants according to water flow regulation and explain in brief.

Last Answer : Classification of hydro-electric power plants according to water flow regulation of water flow:-  1. Large reservoir power plant 2. Run-off river (ROR) power plant with poundage 3. Run-off River ... depends upon rate of flow of water Initial cost is less Its purpose is to generate electricity.

Description : Describe construction and working of high head micro hydro plant.

Last Answer : Construction of hydroelectric power plant Dam and Reservoir: The dam is constructed on a large river in hilly areas to ensure sufficient water storage at height. The dam forms a large ... are all set to transfer this high voltage electricity to nearest power grid through transmission lines.