What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. Apply anti-static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring

What is the proper procedure for suppressing electrical noise in a mobile station?
A. Apply shielding and filtering where necessary
B. Insulate a all plain sheet metal surfaces from each other
C. Apply anti-static spray liberally to all nonmetallic
D. Install filter capacitors in series with all dc wiring
by

1 Answer

Answer :

A. Apply shielding and filtering where necessary
by

Related questions

An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Description : An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Last Answer : C. Immunity to noise

Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Description : Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Last Answer : B. Undergrounding

Which capacitors are suitable for DC filter circuits?

Description : Which capacitors are suitable for DC filter circuits?

Last Answer : Electrolytic capacitors are suitable for DC filter circuits.

Indicate the false statement. A. Industrial noise is usually of the impulse type B. Static is caused by lightning discharges in thunderstorms and other natural electric disturbances occurring in the atmosphere C. Distant stars are another source of man-made noise D. Flourescent lights are another source of man-made noise

Description : Indicate the false statement. A. Industrial noise is usually of the impulse type B. Static is caused by lightning discharges in thunderstorms and other natural electric disturbances occurring in the ... another source of man-made noise D. Flourescent lights are another source of man-made noise

Last Answer : C. Distant stars are another source of man-made noise

When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt field coil before testing C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Description : When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt ... C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Last Answer : Answer: B

Which one of the following regarding the procedure and conduct of business in the Parliament is not correct? (1) To discuss State matters (2) To discuss issues of the use of police force in suppressing the Scheduled Caste and Scheduled Tribe communities (3) To discuss issues in dealing with violent disturbances in an Undertaking under the control of the Union Government (4) To discuss issues for putting down the demands of the industrial labour

Description : Which one of the following regarding the procedure and conduct of business in the Parliament is not correct? (1) To discuss State matters (2) To discuss issues of the use of police force in ... of the Union Government (4) To discuss issues for putting down the demands of the industrial labour

Last Answer : (1) To discuss State matters Explanation: The reports of the Comptroller and Auditor-General of India relating to the accounts of the Union shall be submitted to the president, who shall cause them to be laid before each House of Parliament.

What is the meaning of the term “velocity factor” of a transmission line? A. The ratio of the characteristic impedance of the line to the terminating impedance B. The index of shielding for coaxial cable. C. The velocity of the wave on the transmission line multiplied by the velocity of light in a vacuum. D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.

Description : What is the meaning of the term velocity factor of a transmission line? A. The ratio of the characteristic impedance of the line to the terminating impedance B. The index of shielding for coaxial ... The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.

Last Answer : D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.

One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. Heating of capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Description : One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. ... capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Last Answer : B. Heating of capacitor in the oscillator

How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Description : How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Last Answer : C. Use of regulated power supply

What is the meaning of the term velocity factor of a transmission line? A. The index of shielding for coaxial cable B. The velocity of the wave on the transmission line multiplied by the velocity of light in vacuum C. The ratio of the characteristic impedance of the line to the terminating impedance D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum

Description : What is the meaning of the term velocity factor of a transmission line? A. The index of shielding for coaxial cable B. The velocity of the wave on the transmission line multiplied by the velocity of ... The velocity of the wave on the transmission line divided by the velocity of light in a vacuum

Last Answer : D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum

How can receiver desensitizing be reduced? A. Increase the receiver bandwidth B. Ensure good RF shielding between the transmitter and receiver C. Increase the transmitter audio gain D. Decrease the receiver squelch, gain.

Description : How can receiver desensitizing be reduced? A. Increase the receiver bandwidth B. Ensure good RF shielding between the transmitter and receiver C. Increase the transmitter audio gain D. Decrease the receiver squelch, gain.

Last Answer : D. Decrease the receiver squelch, gain.

Can I use a standard electrical outlet to install a warmrail in my bathroom or do I need special wiring?

Description : Can I use a standard electrical outlet to install a warmrail in my bathroom or do I need special wiring?

Last Answer : Yes, modern homes have adequate electrical outlets to allow you to do this safety. Just remember these units were design to be powered from the top entry and not the bottom. So must not be used up-side down.

The major cause of atmospheric or static noise are A. Thunderstorms B. Airplanes C. Meteor showers D. All of these

Description : The major cause of atmospheric or static noise are A. Thunderstorms B. Airplanes C. Meteor showers D. All of these

Last Answer : A. Thunderstorms

Atmospheric noise or static is not a great problem A. at frequencies below 20 MHz B. at frequencies below 5 MHz C. at frequencies above 30 MHz D. at frequencies above 1 MHz

Description : Atmospheric noise or static is not a great problem A. at frequencies below 20 MHz B. at frequencies below 5 MHz C. at frequencies above 30 MHz D. at frequencies above 1 MHz

Last Answer : C. at frequencies above 30 MHz

Atmospheric noise is known as _______noise. A. static B. cosmic C. solar D. lunar

Description : Atmospheric noise is known as _______noise. A. static B. cosmic C. solar D. lunar

Last Answer : A. static

Form of interference caused by rain or dust storms. A. Precipitation static B. Shot-noise C. Galactic noise D. Impulse noise

Description : Form of interference caused by rain or dust storms. A. Precipitation static B. Shot-noise C. Galactic noise D. Impulse noise

Last Answer : A. Precipitation static

What is the major cause of atmospheric or static noise? A. Sunspots B. Airplanes C. Meteor showers D. Thunderstorm

Description : What is the major cause of atmospheric or static noise? A. Sunspots B. Airplanes C. Meteor showers D. Thunderstorm

Last Answer : D. Thunderstorm

Strong interference from one particular station can be eliminated by the use of A. noise limiters B. squelch circuits C. negative feedback D. wave traps in the antenna circuitry

Description : Strong interference from one particular station can be eliminated by the use of A. noise limiters B. squelch circuits C. negative feedback D. wave traps in the antenna circuitry

Last Answer : D. wave traps in the antenna circuitry

What satellite system parameter represents the quality of a satellite or an earth station receiver? A. Gain-to-Equivalent Noise Temperature Ratio (G/Te) B. Energy of Bit-to-Noise Density Ratio (Eb/No) C. Carrier-to-Noise Density Ratio (C/No) D. Bit energy

Description : What satellite system parameter represents the quality of a satellite or an earth station receiver? A. Gain-to-Equivalent Noise Temperature Ratio (G/Te) B. Energy of Bit-to-Noise Density Ratio (Eb/No) C. Carrier-to-Noise Density Ratio (C/No) D. Bit energy

Last Answer : A. Gain-to-Equivalent Noise Temperature Ratio (G/Te)

The direction of rotation of a DC propulsion motor can be reversed by __________. A. reversing the field connections B. reversing the field and the armature connections C. wiring the field and armature in parallel D. wiring the field and armature in series

Description : The direction of rotation of a DC propulsion motor can be reversed by __________. A. reversing the field connections B. reversing the field and the armature connections C. wiring the field and armature in parallel D. wiring the field and armature in series

Last Answer : Answer: A

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these

Description : Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these

Last Answer : D. All of these

Deemphasis in the receiver in effect attenuates modulating signal components and noise in what frequency range? A. dc B. low C. intermediate D. high

Description : Deemphasis in the receiver in effect attenuates modulating signal components and noise in what frequency range? A. dc B. low C. intermediate D. high

Last Answer : D. high

External noise fields are measured in terms of _______. A. rms values B. dc values C. average values D. peak values

Description : External noise fields are measured in terms of _______. A. rms values B. dc values C. average values D. peak values

Last Answer : D. peak values

In cellular system, the average lead time to install a new base station is approximately ____ months to a year. A. 4 B. 5 C. 6 D. 10

Description : In cellular system, the average lead time to install a new base station is approximately ____ months to a year. A. 4 B. 5 C. 6 D. 10

Last Answer : C. 6

Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Description : Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Last Answer : C. Out of the band

Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should never be grounded. C. Electrical cables must be rigidly held in place by welding of armored cable, or glued in place where nonmetallic insulation is used. D. All of the above.

Description : Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should ... , or glued in place where nonmetallic insulation is used. D. All of the above.

Last Answer : Answer: A

State the function of following components of a nuclear power station: i) Moderator ii) Shielding iii) Control rod iv) Coolant

Description : State the function of following components of a nuclear power station: i) Moderator ii) Shielding iii) Control rod iv) Coolant 

Last Answer : i) Function of Moderator :- Moderator is to moderate or reduce the speed of fast neutron to help the fission process.  ii) Function of sheilding : Shielding is to protect environment, ... from reactor core and transfer it in heat exchanger for producing steam at high pressure and temperature. 

An electrical connection between the wiring of an electric motor and its metal frame is known as a/an _____________. A. eddy current B. ground C. impedance D. flux leakage

Description : An electrical connection between the wiring of an electric motor and its metal frame is known as a/an _____________. A. eddy current B. ground C. impedance D. flux leakage

Last Answer : Answer: B

A current carrying conductor making an electrical contact with a wiring metal conduit is indicated by a _____________. A. low switchboard wattmeter reading B. reading of 1.0 on the power factor meter C. high switchboard voltmeter reading D. totally darkened switchboard ground-detecting light

Description : A current carrying conductor making an electrical contact with a wiring metal conduit is indicated by a _____________. A. low switchboard wattmeter reading B. reading of 1.0 on the power factor meter C. high switchboard voltmeter reading D. totally darkened switchboard ground-detecting light

Last Answer : Answer: D

A galvanometer is an instrument used to measure ___________. A. thickness of galvanized metal B. resistance of electrical wiring insulation C. very small amounts of current or voltage D. quantity of galvans in an electric circuit

Description : A galvanometer is an instrument used to measure ___________. A. thickness of galvanized metal B. resistance of electrical wiring insulation C. very small amounts of current or voltage D. quantity of galvans in an electric circuit

Last Answer : Answer: C

A ground can be defined as an electrical connection between the wiring of a motor and its ____________. A. shunt field B. circuit breaker C. metal framework D. interpole

Description : A ground can be defined as an electrical connection between the wiring of a motor and its ____________. A. shunt field B. circuit breaker C. metal framework D. interpole

Last Answer : Answer: C

The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining

Description : The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining

Last Answer : A. station keeping

What is a frequency discriminator? A. A circuit for filtering two closely adjacent signals B. A circuit for detecting FM signals C. An FM generator D. An automatic bandswitching circuit.

Description : What is a frequency discriminator? A. A circuit for filtering two closely adjacent signals B. A circuit for detecting FM signals C. An FM generator D. An automatic bandswitching circuit.

Last Answer : B. A circuit for detecting FM signals

Explain the principle of La Chatelia liberally ?

Description : Explain the principle of La Chatelia liberally ?

Last Answer : The principle of La Chatelier: If any one of the regulators (temperature / pressure / density of the reactant) of the reaction changes (decreases / increases) in the equilibrium of the two-way ... the equilibrium of the reaction moves from left to right and the amount of product is increased.

The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps the turn before it C. apply the tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Description : The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps ... tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Last Answer : Answer: B

Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Description : Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Last Answer : C. Land station

Station located on an object which is beyond and is intended to go beyond the major portion of the earth’s atmosphere. A. Terrestrial station B. Space station C. Satellite station D. Mobile satellite station

Description : Station located on an object which is beyond and is intended to go beyond the major portion of the earth’s atmosphere. A. Terrestrial station B. Space station C. Satellite station D. Mobile satellite station

Last Answer : B. Space station

A radio land station in the land mobile service A. Mobile station B. Land station C. Base station D. Ship earth station

Description : A radio land station in the land mobile service A. Mobile station B. Land station C. Base station D. Ship earth station

Last Answer : C. Base station

Refers to a land station in a maritime mobile service A. Coast station B. Ship earth station C. Coast earth station D. Maritime station

Description : Refers to a land station in a maritime mobile service A. Coast station B. Ship earth station C. Coast earth station D. Maritime station

Last Answer : A. Coast station

Station in the mobile service not intended to be used while in motion. A. Coast station B. Fixed station C. Base station D. Land station

Description : Station in the mobile service not intended to be used while in motion. A. Coast station B. Fixed station C. Base station D. Land station

Last Answer : D. Land station

One of the following is not among the advantages of series modulation A. No transformer B. Suppressed white noise C. Simple.D. Modulates any frequency

Description : One of the following is not among the advantages of series modulation A. No transformer B. Suppressed white noise C. Simple D. Modulates any frequency

Last Answer : B. Suppressed white noise

Superconducting materials are being used in the Superconducting Super Collider to: w) cool the particles. x) minimize electrical power consumption. y) maximize the acceleration potentials. z) provide radiation shielding.

Description : Superconducting materials are being used in the Superconducting Super Collider to: w) cool the particles. x) minimize electrical power consumption. y) maximize the acceleration potentials. z) provide radiation shielding.

Last Answer : ANSWER: X -- MINIMIZE ELECTRICAL POWER CONSUMPTION.

What is the purpose of having input and output capacitors in three terminal IC regulators?

Description : What is the purpose of having input and output capacitors in three terminal IC regulators?

Last Answer : A capacitor connected between the input terminal and ground cancels the inductive effects due to long distribution leads. The output capacitor improves the transient response.

What are the two common methods for obtaining integrated capacitors?

Description : What are the two common methods for obtaining integrated capacitors?

Last Answer : • Monolithic junction capacitor • Thin-flim capacitor

The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Description : The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Last Answer : Answer: B

Apply knowledge of total station to prepare a contour map by describing its procedure.

Description : Apply knowledge of total station to prepare a contour map by describing its procedure.

Last Answer : Procedure of preparing contour map using total station1) Preliminary set up - Fix the total station over a station and level it. Press the power button to switch on the instrument. ... computer in the appropriate format. 8) Using appropriate application software, contour map will be prepared.

A DC reactor is connected in series with each pole of a converter station in order to:

Description : A DC reactor is connected in series with each pole of a converter station in order to: A) prevent commutation failures in the inverter B) supply reactive power to the converter C) improve system stability D) increase the power transfer capability

Last Answer : A DC reactor is connected in series with each pole of a converter station in order to:  prevent commutation failures in the inverter

The switching from one element to the other element in a typical mobile satellite array. A. Series B. Radial C. Matrix D. Shunt

Description : The switching from one element to the other element in a typical mobile satellite array. A. Series B. Radial C. Matrix D. Shunt

Last Answer : D. Shunt

Will filtering my pond with a 1 micron filter be unhealthy for my fish?

Description : Will filtering my pond with a 1 micron filter be unhealthy for my fish?

Last Answer : I can't imagine how it would be unhealthy. I also would be shocked if you're able to filter it to the degree that it was bad for them. I suppose it depends on the species of fish. When I took ... aquariums I filtered them until the water was as clear as the glass and the fish did not seem to mind.