What is the colour of silica gel in dry stage and when saturated with moisture in a breather?

1 Answer

Answer :

Dry stage – Deep blue
Saturated stage – Whitish pink

Related questions

Description : What is the colour of silica gel in dry stage and when saturated with moisture in a breather?

Last Answer : Dry stage – Deep blue. Saturated stage – Whitish pink. 

Description : Why silica gel is used in breather?

Last Answer : The silica gel is used to absorb the moisture when the air is drawn from the atmosphere in to the transformer.

Description : The chemical used in breather is A. Asbestos fibre B. Silica sand C. Sodium chloride D. Silica gel

Last Answer : Silica gel

Description : Explain the operation of silica gel breather. 

Last Answer : Silica gel breather is used in a transformer to provide dry atmospheric air to the conservator when transformer breathes. The breather consists of an inner container and outer container. The inner container contains silica ... of 250º F to 300º F till the deep blue colour of silica gel is got back.

Description : 67 The chemical used in breather for transformer should have the quality of A. Ionizing air B. Absorbing moisture C. Cleansing the transformer oil D. Cooling the transformer oil

Last Answer : B. Absorbing moisture

Description : Why Silica gel is used in transformers?

Last Answer : Silica Gel is used to remove the moisture in the air entering in to the transformer. During the breathing of the transformer air enters in to the transformer. This air makes contact with the hot ... Silica gel crystals will be in blue color initially and after absorbing moisture it turns to pink.

Description : Which of the listed procedures should be carried out to prevent moisture damage to electrical apparatus during extended periods of idleness? A. Fill the motor housing with CO2 to inert the space. B. Strap ... C. Place heat lamps in the motor housings. D. Cover the equipment with a canvas tarpaulin.

Last Answer : Answer: C

Description : 76 The changes in volume of transformer cooling oil due to variation of atmospeheric temperature during day and night is taken care of by which part of transformer? A. Conservator B. Breather C. Bushings D. Buchholz relay

Last Answer : A. Conservator

Last Answer : The chemical used in breather for transformer should have the quality of cleansing the transformer oil.

Last Answer : The chemical used in breather is silica gel.

Last Answer : The function of breather in a transformer is to arrest flow of moisture when outside air enters the transformer.

Description : Options: A) Yellow B) No colour C) White D) Blue

Last Answer : Correct Answer: D) Blue

Description : At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room ... which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Last Answer : (C) 0.4

Description : What are dry type transformer ?

Last Answer : In this type of transformer, air is used as coolant.The heat is taken to walls of tank and dissipated to the surrounding air.

Description : Material used inside the breather to prevent moisture entering the transformer is

Last Answer : Material used inside the breather to prevent moisture entering the transformer is silica gel

Description : [53] The iron loss of the transformer is negligible during short circuit test because A. The entire input is just sufficient to meet Cu losses only B. Flux produced is a small fraction of the normal flux C. Iron core becomes fully saturated D. Supply frequency is held constant

Last Answer : B. Flux produced is a small fraction of the normal flux

Description : How do you describe the relationship between moisture content and microbial activity as the soil is gradually increased from this dry state to a saturated one What factors dictate the shape of the cur?

Last Answer : Need answer

Description : Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Last Answer : Answer: Option D

Description : The aggregate containing moisture in pores and having its surface dry, is known as (A) Moist aggregates (B) Very dry aggregates (C) Dry aggregates (D) Saturated surface dry aggregate

Last Answer : Answer: Option D

Description : Which one of the following statements is correct? (a) Adding 5% to 6% of moisture by weight increases the volume of dry sand from 18% to 38% (b) The bulking of fine sand is more than that of coarse sand (c ) Volume of fully saturated sand is equal to that of dry sand (d) All of the above

Last Answer : (d) All of the above

Description : An aggregate which may contain some moisture in the pores but having dry surface is known as. (a) Dry aggregate (b) Moist aggregate (c) Saturated surface dry aggregate (d) All the above

Last Answer : (a) Dry aggregate

Description : What is the use of breather in the transformer?

Last Answer : Breather is a bottle shaped steel tube, which is attached to one side of conservator to allow the air to pass in and out of the tank or conservator through the calcium chloride and silica gel, ... contained in the air. When the silica gel absorb the moisture its colour changes from blue to pink.

Description : Why should Dry-Type Transformers never be overloaded?

Last Answer : Overloading of a transformer results in excessive temperature. This excessive temperature causes overheating which will result in rapid deterioration of the insulation and cause complete failure of the transformer coils.

Description : What is the color before using silica gel ?

Last Answer : Silica gel is brown or light in color before application.

Description : Why is silica gel used in breeders ?

Last Answer : Answer : Silica gel absorbs fumes from the air as it enters the breather. It is a type of chemical substance.

Description : The volume of nitrogen gas Um (measured at STP) required to cover a sample of silica get with a mono-molecular layer is `129 cm^(3) g^(-1)` of gel. Ca

Last Answer : The volume of nitrogen gas Um (measured at STP) required to cover a sample of silica get with a mono-molecular layer ... `16.2 xx 10^(-20) m^(2).`

Description : When air passes through silica gel, A. it absorbs water vapour molecules B. latent heat of condensation is released C.dbt of air increases D. all of the mentioned

Last Answer : ANSWER : D

Description : Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Last Answer : ANSWER : C

Description : A 'breath test' used by traffic police to check drunken driving uses: (1) potassium dichromate-sulphuric acid (2) potassium permanganate-sulphuric acid (3) turmeric on filter paper (4) silica gel coated with silver nitrate

Last Answer : (1) potassium dichromatesulphuric acid Explanation: The main constituent of alcohol is Ethanol and the concentration of ethanol in a sample can be determined by back titration with acidified potassium ... contact with the yellow dichromate-coated crystals, the color changes from yellow to green.

Description : Silica gel is a - (1) moisturizer (2) flavouring agent (3) drying agent (4) delicious food

Last Answer : (3) drying agent Explanation: Silica gel is a drying agent, meant to remove moisture from an enclosed space. It is a granular, vitreous, porous form of silicon dioxide made synthetically from ... bottles. The packets contain either granular silicic acid, which resembles sand, or tiny gel beads.

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Description : Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Last Answer : (A) Sulphuric acid

Description : The most common filter aid is (A) Diatomaceous earth (B) Calcium silicate (C) Sodium carbonate (D) Silica gel

Last Answer : (A) Diatomaceous earth

Description : Which of the following adsorbent is used in the refining of sugar? (A) Bone charcoal (B) Wood charcoal (C) Silica gel (D) Activated clay

Last Answer : (A) Bone charcoal

Description : Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Last Answer : (D) Activated carbon

Description : Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Last Answer : (B) Through circulation

Description : Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)

Last Answer : (D) Bog iron (i.e., moist ferric hydroxide)

Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Last Answer : (B) Adsorption on bog iron bed

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Description : Catalyst used in desulphurisation of naphtha is (A) Co-Mo (B) Pt-Rh (C) Silica gel (D) Nickel

Last Answer : (A) Co-Mo

Description : Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Last Answer : (A) Reduced iron oxide

Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Last Answer : (A) Nickel

Description : H2S present in gaseous stream can be removed by adsorption on (A) Silica gel (B) Active carbon (C) Bog iron (D) Limestone powder

Last Answer : (C) Bog iron

Description : Which of the following is an adsorbent for removal of nitrogen oxides from gas/air? (A) Active carbon (B) Silica gel (C) Bog iron (iron oxide) (D) Pulverised limestone

Last Answer : (B) Silica gel

Description : Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon

Last Answer : (B) Limestone powder or alkalised alumina

Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel

Last Answer : (A) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Description : Wet chlorine gas produced during electrolysis of brine is dehydrated by (A) Spraying 66° Be H2SO4 counter current to the flow of the gas (B) Passing it through a bed of diatomaceous earth (C) Passing it through a bed of silica gel (D) None of these

Last Answer : (A) Spraying 66° Be H2SO4 counter current to the flow of the gas

Description : The solidifying agent commonly used in preparation of media is/are A-agar B-silica gel C-both (a) and (b) D-none of these

Last Answer : both (a) and (b)

Description : Which of the following is commonly used as liquid absorbent?  a. Silica gel  b. Activated alumina  c. Ethylene glycol  d. None of these

Last Answer : Ethylene glycol