The HPAs in most satellite are A. TWTs B. Klystrons C. Vacuum tubes D. Magnetrons

The HPAs in most satellite are
A. TWTs
B. Klystrons
C. Vacuum tubes
D. Magnetrons
by

1 Answer

Answer :

A. TWTs
by

Related questions

What two forms of instability are common in magnetrons?

Description : What two forms of instability are common in magnetrons?

Last Answer : Mode skipping and mode shifting.

What two forms of instability are common in magnetrons?

Description : What two forms of instability are common in magnetrons?

Last Answer : Mode skipping and mode shifting.

What two methods are used to couple energy into and out of magnetrons?

Description : What two methods are used to couple energy into and out of magnetrons?

Last Answer : Loops and slots.

One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. Heating of capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Description : One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. ... capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Last Answer : B. Heating of capacitor in the oscillator

Does anybody make vacuum tubes anymore? All I ever find are surplus.

Description : Does anybody make vacuum tubes anymore? All I ever find are surplus.

Last Answer : answer:Without details as to type, there are over 39,000 currently listed on eBay. I’d say they’re still manufactured since there’s also availability on Amazon.

Why vacuum tubes are not preferred at microwave?

Description : Why vacuum tubes are not preferred at microwave?

Last Answer : Actually three special purpose vacuum tubes were specifically designed for microwave usage and are in some cases still the least expensive way to work with high power microwave signals.These ... and the electromagnetic compatibility (EMC) testing industry for immunity testing of electronic devices)

Which of the following is not a feature of first generation computers A) They used vacuum tubes or valves as main electronic component B) They consumed lots of electricity and produced excessive heat C) They used machine language and assembly language to program the machine D) None of above

Description : Which of the following is not a feature of first generation computers A) They used vacuum tubes or valves as main electronic component B) They consumed lots of electricity and produced excessive heat C) They used machine language and assembly language to program the machine D) None of above

Last Answer : Answer : C

First generation computers used for memory A) vacuum tubes B) silicon chips C) magnetic drum D) RAM

Description : First generation computers used for memory A) vacuum tubes B) silicon chips C) magnetic drum D) RAM

Last Answer : Answer : C

Which electronic component was made out of semiconductor material? A) Vacuum tubes B) Transistors C) ICs D) All of above

Description : Which electronic component was made out of semiconductor material? A) Vacuum tubes B) Transistors C) ICs D) All of above

Last Answer : Answer : C

Who invented vacuum tubes? A) John Bardeen B) William Shockley C) Lee de Forest D) All of above

Description : Who invented vacuum tubes? A) John Bardeen B) William Shockley C) Lee de Forest D) All of above

Last Answer : Answer : C

What was the main disadvantage of vacuum tubes? A) They were larger in size B) They consumed a lot of electricity C) They produced heat and often burned out D) The operation cost was high

Description : What was the main disadvantage of vacuum tubes? A) They were larger in size B) They consumed a lot of electricity C) They produced heat and often burned out D) The operation cost was high

Last Answer : Answer : C

Why are vacuum tubes also called valves? A) Because they can amplify the weak signals and make them strong B) Because they can stop or allow the flow of current C) Both of above D) None of above

Description : Why are vacuum tubes also called valves? A) Because they can amplify the weak signals and make them strong B) Because they can stop or allow the flow of current C) Both of above D) None of above

Last Answer : Answer : B

The main electronic component used in first generation computers was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Description : The main electronic component used in first generation computers was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Last Answer : Answer : B

Chief component of first generation computer was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Description : Chief component of first generation computer was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Last Answer : Answer : B

First Generation computers used ______ for Circuitry and ________ for memory (A) Transistor and Magnetic Core (B) IC and Magnetic Memory (C) Vacuum tubes and Magnetic drum (D) IC and Magnetic Core

Description : First Generation computers used ______ for Circuitry and ________ for memory (A) Transistor and Magnetic Core (B) IC and Magnetic Memory (C) Vacuum tubes and Magnetic drum (D) IC and Magnetic Core

Last Answer : (C) Vacuum tubes and Magnetic drum

Which of the following statements comparing transistors and vacuum tubes is correct? A. Both transistors and vacuum tubes have a cathode that must be heated to give off electrons. B. A vacuum tube must have a heated cathode, where transistors do not. C. Neither transistors nor vacuum tubes require heat for electrons to flow. D. The anode of both transistors and vacuum tubes must be heated to give off electrons.

Description : Which of the following statements comparing transistors and vacuum tubes is correct? A. Both transistors and vacuum tubes have a cathode that must be heated to give off electrons. B. A vacuum tube must ... flow. D. The anode of both transistors and vacuum tubes must be heated to give off electrons.

Last Answer : Answer: B

Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Description : Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Last Answer : Answer: A

The method used to produce electron emission in most vacuum tubes is known as ____________. A. photoelectric emission B. secondary electric emission C. cold cathodic electric emission D. thermionic emission

Description : The method used to produce electron emission in most vacuum tubes is known as ____________. A. photoelectric emission B. secondary electric emission C. cold cathodic electric emission D. thermionic emission

Last Answer : Answer: D

Vacuum tubes have been replaced by-----? A. Conductors B. Diodes C. Transistors (Answer) D. None of these

Description : Vacuum tubes have been replaced by-----? A. Conductors B. Diodes C. Transistors (Answer) D. None of these

Last Answer : C. Transistors (Answer)

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : Vacuum Tubes and Valves

This invention replaced vacuum tubes and made computers much smaller and faster. However, it was eventually replaced by another invention (i) RAM (ii) ENIAC (iii) Transformer (iv) Transistor.

Description : This invention replaced vacuum tubes and made computers much smaller and faster. However, it was eventually replaced by another invention (i) RAM (ii) ENIAC (iii) Transformer (iv) Transistor.

Last Answer : (iv) Transistor.

First generation computer systems used 1) Transistors 2) Vacuum tubes 3) Magnetic cores 4) Silicon chips

Description : First generation computer systems used 1) Transistors 2) Vacuum tubes 3) Magnetic cores 4) Silicon chips

Last Answer : 2) Vacuum tubes

Which electronic component was use in first generation? 1) Vacuum tubes 2) transistors 3) IC chips 4) all above

Description : Which electronic component was use in first generation? 1) Vacuum tubes 2) transistors 3) IC chips 4) all above

Last Answer : 1) Vacuum tubes

Which electronic component was use in first generation? 1 Vacuum tubes 2 transistors 3 IC chips 4 all above

Description : Which electronic component was use in first generation? 1 Vacuum tubes 2 transistors 3 IC chips 4 all above

Last Answer : 1 Vacuum tubes

How did vacuum tubes cause a problem for first generation computers

Description : How did vacuum tubes cause a problem for first generation computers

Last Answer : They were unreliable, required a lot of power to run, and produced so much heat that air conditioning was needed to protect computer parts.

In electronic computers, vacuum tubes were replaced by transistors and transistors have been replaced by what device?

Description : In electronic computers, vacuum tubes were replaced by transistors and transistors have been replaced by what device?

Last Answer : Integrated circuits.

When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Description : When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Last Answer : Differences in performance of tubes of the same type

Vacuum tubes are designed to operate in what portion of the Ep - Ip

Description : Vacuum tubes are designed to operate in what portion of the Ep - Ip

Last Answer : The linear portion.

Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : b. Vacuum Tubes and Valves

Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : b. Vacuum Tubes and Valves

Fifth generation computers do not have : (1) Speech recognition (2) Artificial intelligence (3) Very large scale integration (4) Vacuum tubes

Description : Fifth generation computers do not have : (1) Speech recognition (2) Artificial intelligence (3) Very large scale integration (4) Vacuum tubes 

Last Answer : Vacuum tubes

is Ohms law applicable to vacuum tubes?

Description : is Ohms law applicable to vacuum tubes?

Last Answer : Ohm's law is not applicable to vacuum tubes.

In what medium sound travels the faster? A. Vacuum B. Solid C. Liquid D. Gas

Description : In what medium sound travels the faster? A. Vacuum B. Solid C. Liquid D. Gas

Last Answer : B. Solid

What is the term for the ratio of actual velocity at which a signal travels through a line to the speed of light in a vacuum? A. Velocity factor B. Characteristic impedance C. Surge impedance D. Standing wave ratio

Description : What is the term for the ratio of actual velocity at which a signal travels through a line to the speed of light in a vacuum? A. Velocity factor B. Characteristic impedance C. Surge impedance D. Standing wave ratio

Last Answer : A. Velocity factor

What is the meaning of the term “velocity factor” of a transmission line? A. The ratio of the characteristic impedance of the line to the terminating impedance B. The index of shielding for coaxial cable. C. The velocity of the wave on the transmission line multiplied by the velocity of light in a vacuum. D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.

Description : What is the meaning of the term velocity factor of a transmission line? A. The ratio of the characteristic impedance of the line to the terminating impedance B. The index of shielding for coaxial ... The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.

Last Answer : D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.

What is the meaning of the term velocity factor of a transmission line? A. The index of shielding for coaxial cable B. The velocity of the wave on the transmission line multiplied by the velocity of light in vacuum C. The ratio of the characteristic impedance of the line to the terminating impedance D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum

Description : What is the meaning of the term velocity factor of a transmission line? A. The index of shielding for coaxial cable B. The velocity of the wave on the transmission line multiplied by the velocity of ... The velocity of the wave on the transmission line divided by the velocity of light in a vacuum

Last Answer : D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum

Which does not use vertical polarization antenna? A. AM Broadcasting B. FM Broadcasting C. Mobile Communications D. Satellite Communications

Description : Which does not use vertical polarization antenna? A. AM Broadcasting B. FM Broadcasting C. Mobile Communications D. Satellite Communications

Last Answer : B. FM Broadcasting

Descending pass for a satellite means a pass from A. North to South B. South to North C. East to West D. West to East

Description : Descending pass for a satellite means a pass from A. North to South B. South to North C. East to West D. West to East

Last Answer : A. North to South

Which of the following is the most common application of satellite? A. Surveillance B. Military application C. Communications D. Newscasting

Description : Which of the following is the most common application of satellite? A. Surveillance B. Military application C. Communications D. Newscasting

Last Answer : C. Communications

What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Description : What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Last Answer : A. 198 dB

What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Description : What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Last Answer : A. 256 msec

When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Description : When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Last Answer : A. 196 dB

The first satellite launched for a geosynchronous orbit but unfortunately lost during orbit injection A. Syncom I B. Telstar I C. Sputnik I D. Early Bird I

Description : The first satellite launched for a geosynchronous orbit but unfortunately lost during orbit injection A. Syncom I B. Telstar I C. Sputnik I D. Early Bird I

Last Answer : A. Syncom I

The first intelsat satellite that was launched in 1965 was named A. Early Bird I B. Echo C. Telstar I D. Courier

Description : The first intelsat satellite that was launched in 1965 was named A. Early Bird I B. Echo C. Telstar I D. Courier

Last Answer : A. Early Bird I

Refers to the satellite orientation with respect to the earth A. Satellite altitude B. Satellite position C. Satellite location D. Satellite orbit

Description : Refers to the satellite orientation with respect to the earth A. Satellite altitude B. Satellite position C. Satellite location D. Satellite orbit

Last Answer : A. Satellite altitude

The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining

Description : The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining

Last Answer : A. station keeping

When the satellite are spaced 4˚ of the 360˚ complete circle, how many parking spaces or orbit slots are available? A. 90 B. 85 C. 95 D. 80

Description : When the satellite are spaced 4˚ of the 360˚ complete circle, how many parking spaces or orbit slots are available? A. 90 B. 85 C. 95 D. 80

Last Answer : A. 90

incidentally propose the geostationary scheme or orbit of the satellite in 1940s A. Arthur Clarke B. Carl Friedrich Gauss C. Samuel Morse D. Stephen Gray

Description : incidentally propose the geostationary scheme or orbit of the satellite in 1940s A. Arthur Clarke B. Carl Friedrich Gauss C. Samuel Morse D. Stephen Gray

Last Answer : A. Arthur Clarke

The ________ angle measures the satellite position clockwise from the direction of true north. A. azimuth B. elevation C. depression D. critical

Description : The ________ angle measures the satellite position clockwise from the direction of true north. A. azimuth B. elevation C. depression D. critical

Last Answer : A. azimuth