What are the different types of chopper with respect to commutation process?

1 Answer

Answer :

a.  Voltage commutated chopper.
b.  Current commutated chopper.
c.  Load commutated chopper.

Related questions

Description : What are the types of commutation with respect to commutation process?

Last Answer : Voltage commutated chopper Current commutated chopper Load commutated chopper

Description : How is the inverter circuit classified based on commutation circuitry?

Last Answer : a. Line commutated inverters. b. Load commutated inverters. c. Self commutated inverters. d. Forced commutated inverters.

Description : What are the disadvantages of load commutated chopper?

Last Answer : a. For high power applications, efficiency becomes very low because of high switching losses at high operating frequencies. b. Freewheeling diode is subjected to twice the supply voltage. c ... other pair is commutated. This can be realized by sensing the capacitor current that is alternating.

Description : What are the advantages of load commutated chopper?

Last Answer : a. Commutating inductor is not required. b. It is capable of commutating any amount of load current. c. It can work at high frequencies in the order of kHz. d. Filtering requirements are minimal.

Description : What are the advantages of current commutated chopper?

Last Answer : a. The capacitor always remains charged with the correct polarity. b. Commutation is reliable as load current is less than the peak commutation current ICP. c. The auxiliary thyristor TA is naturally commutated as its current passes through zero value.

Description : What is meant by load commutation?

Last Answer : In this process, the load current flowing through the thyristor either becomes zero or is transferred to another device from the conducting thyristor.

Description : What is meant by current commutation?

Last Answer : In this process, a current pulse is made to flow in the reverse direction through the conducting thyristor and when the net thyristor current becomes zero, it is turned off.

Description : What is meant by voltage commutation?

Last Answer : In this process, a charged capacitor momentarily reverse biases the conducting thyristor and turn it off.

Description : Write down the expression for the average output voltage for step down and step up chopper.

Last Answer : Average output voltage for step down chopper is VO= αVS. Average output voltage for step up chopper is VO= αVSx [1/ ( 1- α)].

Description : What is meant by PWM control in dc chopper?

Last Answer : In this control method, the on time Ton is varied but chopping frequency is kept constant. The width of the pulse is varied and hence this type of control is known as PulseWidth Modulation (PWM).

Description : What is meant by FM control in a dc chopper?

Last Answer : In frequency modulation control, the chopping frequency f (or the chopping period T) is varied. Here two controls are possible. a. On-time T onis kept constant b. Off period T offis kept constant.

Description : Write down the expression for average output voltage for step up chopper.

Last Answer : Average output voltage for step down chopper V0= Vs, αis the duty cycle 1- α

Description : Write down the expression for average output voltage for step down chopper.

Last Answer : Average output voltage for step down chopper V0 = αVs, αis the duty cycle

Description : What is meant by step-up and step-down chopper?

Last Answer : In a step- down chopper or Buck converter, the average output voltage is less than the input voltage. In a step- up chopper or Boost converter, the average output voltage is more than the input voltage.

Description : What are the applications of dc chopper?

Last Answer : Chopper provides a. High efficiency b. Smooth acceleration c. Fast dynamic response d. Regeneration

Description : What are the applications of dc chopper?

Last Answer : a. Battery operated vehicles b. Traction motor control in electric traction c. Trolly cars d. Marine hoists e. Mine haulers f. Electric braking.

Description : What is meant by dc chopper?

Last Answer : A dc chopper is a high speed static switch used to obtain variable dc voltage from a constant dc voltage.

Description : What is commutation angle or overlap angle?

Last Answer : The commutation period when outgoing and incoming thyristors are conducting is known as overlap period. The angular period, when both devices share conduction is known as the commutation angle or overlap angle.

Description : What is meant by chopper?

Last Answer : Chopper converts fixed dc voltage into variable dc voltage

Description : What are the control strategies of chopper?

Last Answer : The control strategies of chopper are 1. Pulse width modulation PWM (Variable TON, Constant frequency) 2. Frequency modulation (Constant TON or TOFF, Variable frequency) 3. Current Limit Control (CLC)

Description : What is forced commutation?

Last Answer : The process of the current flowing through the thyristor is forced to become zero by external circuitry is called as forced commutation.

Description : What is natural commutation?

Last Answer : The process of the current flowing through the thyristor goes through a natural zero and enable the thyristor to turn off is called as natural commutation.

Description : What is meant by commutation?

Last Answer : The process of changing the direction of current flow in a particular path of the circuit. It is used to turn off the SCR.

Description : What are the different types of power MOSFET?

Last Answer : a. N-channel MOSFET b. P-channel MOSFET

Description : What are the two types of cyclo-converters?

Last Answer : a. Step-up cyclo-converters b. Step-down cyclo-converters

Description : What types of inverters require feedback diodes?

Last Answer : VSI with RL load.

Description : What are the two types of TRC?

Last Answer : a. Constant frequency control b. Variable frequency control

Description : What are the two types of control strategies?

Last Answer : a. Time Ratio Control (TRC) b. Current Limit Control method (CLC)

Description : What are the types of cyclo-converters?

Last Answer : Step up cyclo-converter Step down cyclo-converter.

Description : In a thyristor D.C. chopper, which type of commutation results in best performance ?

Last Answer : voltage commutation

Description : What are the different losses that occur in thyristor while operating?

Last Answer : Different losses that occur are Forward conduction losses during conduction of the thyristor Loss due to leakage current during forward and reverse blocking. Power loss at gate or Gate triggering loss. Switching losses at turn-on and turn-off.

Description : What are the different operation regions of the SCR?

Last Answer : SCR or thyristor will have three regions of operations based on the mode in which the device is connected in the circuit. Reverse blocking region: When the cathode of the thyristor is made positive with ... scr. Hence a gate signal is applied before the forward break over voltage to trigger the scr.

Description : What are the different methods of firing circuits for line commutated converter?

Last Answer : a. UJT firing circuit. b. The cosine wave crossing pulse timing control. c. Digital firing schemes.

Description : What are the different factors for the selection of electrical drives?

Last Answer : Steady state operation requirements Transient operation requirements Requirements related to the source Capital and running cost, maintenance needs, life Space and weight restrictions Environment and location Reliability

Description : What are the different methods to turn on the thyristor?

Last Answer : a. Forward voltage triggering b. Gate triggering c. dv/dt triggering d. Temperature triggering e. Light triggering

Description : What are the different turn on methods of SCR?

Last Answer : Forward voltage triggering Gate Triggering dv/dt triggering Temperature triggering Light triggering

Description : Why Generation Voltage in Power Plant is Low (11kV to 33kV) ?

Last Answer : Generally electrical power is generated at low voltages (generation voltage will be around 11 to 33kV) depending on the power output rating of the generator and transmitted to the load centers by stepping up the ... operate at 23.5 kV with line currents of about 19,000 A at 0.85 power factor.

Description : What is the relation between the gate signal and forward break over voltage (VBO)?

Last Answer : Thyristor can be triggered by increasing the forward voltage between anode and cathode, at forward break over voltage thyristor starts conducting. However this process may damage the thyristor, so thyristor ... of the gate current. Higher is the gate current lower is the forward break over voltage

Description : Why thyristor is considered as Charge controlled device?

Last Answer : During the triggering process of the thyristor from forward blocking state to forward conduction state through the gate signal, by applying the gate signal (voltage between gate and cathode) increases the ... By controlling the amount of charge we can control the turning on time of the scr.

Description : What is meant by negative converter group in a cycloconverter?

Last Answer : The part of the cycloconverter circuit that permits the flow of current during negative half cycle of output current is called negative converter group.

Description : What is meant by positive converter group in a cycloconverter?

Last Answer : The part of the cycloconverter circuit that permits the flow of current during positive half cycle of output current is called positive converter group.

Description : What are the applications of cyclo-converter?

Last Answer : a. Induction heating b. Speed control of high power ac drives c. Static VAR generation d. Power supply in aircraft or ship boards

Description : What is meant by step-down cyclo-converters?

Last Answer : In these converters, the output frequency is more than the supply frequency.

Description : What is meant by step-up cyclo-converters?

Last Answer : In these converters, the output frequency is less than the supply frequency.

Description : What is meant by cyclo-converter?

Last Answer : It converts input power at one frequency to output power at another frequency with one-stage conversion. Cycloconverter is also known as frequency changer.

Description : What are the advantages of sequence control of ac voltage regulators?

Last Answer : a. System power factor is improved. b. Harmonics are reduced in the source current and the load voltage.

Description : What is meant by sequence control of ac voltage regulators?

Last Answer : It means that the stages of voltage controllers in parallel triggered in a proper sequence one after the other so as to obtain a variable output with low harmonic content.

Description : What is meant by high frequency carrier gating?

Last Answer : Thyristor is turned on by using a train of pulses from αto π. This type of signal is called as high frequency carrier gating.

Description : What are the disadvantages of continuous gating signal?

Last Answer : a. More heating of the SCR gate. b. Increases the size of pulse transformer.

Description : What type of gating signal is used in single phase ac voltage controller with RL load?

Last Answer : High frequency carrier gating signal is used for single phase ac voltage controller with RL load.