Description : The laser frequency when the light has the wavelength 800 nm is ∙ a. 375 x 1012 Hz ∙ b. 475 x 1015 Hz ∙ c. 375 x 109 Hz ∙ d. 375 x 1018 Hz
Last Answer : d. 375 x 1018 Hz
Description : Red Laser light has a wavelength of a) 630.8 nm b) 630 cm c) 632.8 nm d) 639.9 nm
Last Answer : c) 632.8 nm
Description : What is the reference frequency of CCIT phosphomeric noise measurement? A. 800 Hz B. 1000 Hz C. 1500 Hz D. 3400 Hz
Last Answer : A. 800 Hz
Description : What is the reference frequency of CCITT psophometric noise measurement? A. 800 Hz B. 1500 Hz C. 3400 Hz D. 1000 Hz
Description : The wavelength of visible light extends from a. 0.8 to 1.0 nm b. 400 to 750 nm c. 200 to 660 nm d. 700 to 1200 nm
Last Answer : b. 400 to 750 nm
Description : The first laser emitted a. Pulses of 694 nm red light b. A continuous red beam c. Pulses of white light from a helical flashlamp d. Spontaneous emission
Last Answer : a. Pulses of 694 nm red light
Description : Which laser emits light in the visible range 400 to 700 nm? a. Argon-ion b. Nitrogen c. Carbon-dioxide d. Neodymium-YAG
Last Answer : a. Argon-ion
Description : What is the phase delay of an 800 Hz voice signal if the phase shift is 15 degrees? A. 1.25 µsec B. 52 µsec C. 83.33 µsec D. 26 µsec
Last Answer : B. 52 µsec
Description : At what particular wavelength is solar flux measured? A. 10.7 mm band B. 10.7 m band C. 10.7 cm band D. 10.7 nm band
Last Answer : C. 10.7 cm band
Description : ____________ is the out-of-band signaling between toll central offices (Bell System Standard) A. 2,000 Hz B. 800 Hz C. 3,835 Hz D. 3700 Hz
Last Answer : D. 3700 Hz
Description : What is considered the threshold of audibility at 3000 Hz? A. 10-12 W/m2 B. 10-16 W/m2 C. 10-12 W/cm2 D. 10-15 W/cm2
Last Answer : A. 10-12 W/m2
Description : What is the frequency of light with a wavelength of NM?
Last Answer : All light travels in the speed of light in vacuum, that is300,000 km/sec. The relevant formula is C = f*lambda, where C isthe speed of light, f is the frequency and lambda the wavelength ... terahertz.The color of this light, incidentally, is red. Please see thelinks. They are beautiful, anyway.
Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000
Last Answer : C. 125,000
Description : What is the photon energy for an infrared wave with frequency of 1012 Hz? a. 10.6 x 1034 joules b. 6.63 x 10-34 joules c. 6.63 x 10-22 joules d. 10.6 x 1022 joules
Last Answer : c. 6.63 x 10-22 joules
Description : Calculate the most appropriate unit cost for a distribution division of a multinational company using the following information. Miles travelled 636,500 Tonnes carried 2,479 Number of drivers 20 Hours worked by drivers 35,520 Tonnes miles ... 800 (a) Rs .88 (b) Rs 1.50 (c) Rs 15.84 (d) Rs28, 140
Last Answer : (d) Rs28, 140
Description : When a beam of light enters one medium from another, which quantity will not change? a. Direction b. Speed c. Frequency d. Wavelength
Last Answer : c. Frequency
Description : Quantity that do not change when a beam of light enters on e medium to another. A. Frequency B. Wavelength C. Direction D. Speed
Last Answer : A. Frequency
Description : What generates a light beam of a specific visible frequency? a. Laser b. Maser c. Infrared d. Flashlight
Last Answer : a. Laser
Description : ________ generates light beam at a specific visible frequency. A. Glass fiber B. Infrared C. Light waves D. Laser
Last Answer : D. Laser
Description : What frequency is 10 octaves above 30 Hz? A. 30.72 kHz B. 30 kHz C. 300 Hz D. 307.2 kHz
Last Answer : A. 30.72 kHz
Description : What is Frequency of radiation with wavelength 436 NM?
Last Answer : Need answer
Description : ange of wavelength of visible light ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 390 nm to 770 nm
Last Answer : D. 390 nm to 770 nm
Description : A loudspeaker cabinet has an internal volume of 5,184 in3 (84,950 cm3 ). It has a port area on the baffle of 50 in2 (322.58cm2 ) and a thickness of 0.70 in (18 mm). What is the Helmholtz resonance, in hertz, of this loudspeaker enclosure? A. 250 Hz B. 245 Hz C. 240 Hz D. 255 Hz
Last Answer : C. 240 Hz
Description : What is the wavelength of an earthquake wave if it has a speed of 14 kms and a frequency of 10 Hz?
Last Answer : speed = wavelength x frequencywavelength = speed/frequencyspeed = 14 km/s , frequency = 10 Hz = 10/swavelength = (14 km/s)/(10/s) = 1.4 km
Description : The following are true about spectral sensitivity of the retina: a. in scotopic conditions, the peak sensitivity of the eye is near 500 nm b. under photopic conditions the peak sensitivity is near 555 nm c ... light the retina has a peak sensitivity near 440 nm to a 25-Hz stimulus d. all above
Last Answer : all above
Description : What is the effective radiated power of a repeater with 100 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 800 W B. 126 W C. 12.5 W D. 1260 W
Last Answer : B. 126 W
Description : A 10 Kg mass suspended by spring of stiffness 1000 N/m. the natural frequency of the system after giving excitation will be A. 0 Hz B. 1.59 Hz C. 2 Hz D. 15.9 Hz
Last Answer : B. 1.59 Hz
Description : In acoustics, if the volume of the room is 200 m3 then at what frequency the coefficient of absorption is measured? A. 120 kHz B. 120 Hz C. 100 Hz D. 150 Hz
Last Answer : B. 120 Hz
Description : A frequency of 3000 Hz has how many octaves above 1000 Hz? A. 1.6 octaves B. 2.1 octaves C. 1 octave D. 3 octaves
Last Answer : A. 1.6 octaves
Description : What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz
Last Answer : A. 100 Hz
Description : What is the frequency of a 2-cm sound wave in sea water at 25˚C? A. 76 kHz B. 76 Hz C. 76 MHz D. 76 mHz
Last Answer : A. 76 kHz
Description : At what loudness level do pitch (in mels) and frequency (in Hz) are numerically equal? A. 0 dB B. 20 dB C. 60 dB D. 40 dB
Last Answer : D. 40 dB
Description : The frequency tolerance of an AM radio broadcast station A. 200 Hz B. 2000 Hz C. 20 Hz D. 2 Hz
Last Answer : C. 20 Hz
Description : The lowest frequency produced by an instrument. A. Harmonic B. Fundamental C. Midrange D. 0 Hz
Last Answer : B. Fundamental
Description : A carrier signal has ______. A. Constant peak amplitude B. The information C. Frequency range 20-20000 Hz D. A varying amplitude
Last Answer : A. Constant peak amplitude
Description : The midrange frequency range of sound is from A. 256 to 2048 Hz B. 2048 to 4096 Hz C. 512 to 2048 Hz D. 16 to 64 Hz
Last Answer : A. 256 to 2048 Hz
Description : If the synchronous speed of a 12 pole, polyphase, induction motor operating at 60 Hz were 600 RPM, how many poles will be required in a similar motor operating at the same frequency but having a synchronous speed of 900 RPM? A. 4 B. 6 C. 8 D. 18
Last Answer : Answer: C
Description : What is the gain of an antenna over a half-wavelength dipole when it has 6 dB gain over an isotropic radiator? A. 6.0 dB B. 8.1 dB C. 3.9 dB D. 10.0 dB
Last Answer : C. 3.9 dB
Description : A parallel beam, of light of wavelength 100 nm passed through a sample of atomic hydrogen gas in ground state. (a) Assume that when a phton supplies s
Last Answer : A parallel beam, of light of wavelength 100 nm passed through a sample of atomic hydrogen gas ... of radiation that may be detected by the detector.
Description : The wavelength of light absorbed by Pr form of phytochrome is (a) 680 nm (b) 720 nm (c) 620 nm (d) 640 nm
Last Answer : (a) 680 nm
Description : A major breakthrough in the studies of cells came with the development of electron microscope. This is because (a) the electron microscope is more powerful than the light microscope as it ... (d) electron beam can pass through thick materials, whereas light microscopy requires thin sections.
Last Answer : (b) the resolving power of the electron microscope is much higher than that of the light microscope
Description : Infrared light has a wavelength that is ∙ A. less than 400 nm ∙ B. more than 700 nm ∙ C. less than 700 nm ∙ D. a little over 400 nm
Last Answer : B. more than 700 nm
Description : What is the typical wavelength of light emitted from epitaxially grown LEDs? ∙ a. 840 nm ∙ b. 490 nm ∙ c. 480 nm ∙ d. 940 nm
Last Answer : ∙ d. 940 nm
Description : The wavelength of visible light extends from ∙ a. 0.8 to 1.0 nm ∙ b. 400 to 750 nm ∙ c. 200 to 660 nm ∙ d. 700 to 1200 nm
Description : The first laser emitted ∙ a. Pulses of 694 nm red light ∙ b. A continuous red beam ∙ c. Pulses of white light from a helical flash lamp ∙ d. Spontaneous emission
Last Answer : ∙ a. Pulses of 694 nm red light
Description : Which laser emits light in the visible range 400 to 700 nm? ∙ a. Argon-ion ∙ b. Nitrogen ∙ c. Carbon-dioxide ∙ d. Neodymium-YAG
Description : What is the speed of the wave if the frequency is 80 Hz and the wavelength is 4m?
Last Answer : The speed of any wave is the product of frequency xwavelength.
Description : A travelling wave passes a point of observation where the time interval between successive crests is 0.2 s. Which of the following is then true? (a) The wavelength is 5 m (b) The wavelength is 0.2 m (c) The velocity of propagation is 5 m/s (d) The frequency of 5 Hz.
Last Answer : Ans:(d)
Description : What is the optimum reverberation time at 500 Hz for a cinema? A. 0.8 – 1.2 sec. B. 0.9 – 1.3 sec. C. 0.6 – 0.8 sec. D. 0.45 – 0.55 sec.
Last Answer : A. 0.8 – 1.2 sec.
Description : What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s
Last Answer : D. 1.6 to 1.8 s