Maximum combustion temperature in gas turbines is of the order of 1100 to 10°C whereas same is around 00°C in I.C. engine ? Why ?

Maximum combustion temperature in gas turbines is of the order of 1100 to 10°C whereas same is around 00°C in I.C. engine ? Why ?
by

1 Answer

Answer :

High temperature in I.C. engine can be tolerated because it lasts for a fraction of second but gas turbines have to face it continuously which metals can’t withstand.
by

Related questions

With a gas turbine engine, engine anti-icing should be selected ‘ON’: a. Whenever the igniters are on b. Whenever the IOAT is +10°C or below and the air contains visible moisture c. Whenever the TOAT is +10°C or below and it is raining d. Whenever the ice detector system warning light comes on

Description : With a gas turbine engine, engine anti-icing should be selected ‘ON’: a. Whenever the igniters are on b. Whenever the IOAT is +10°C or below and the air contains visible moisture c. Whenever the TOAT is +10°C or below and it is raining d. Whenever the ice detector system warning light comes on

Last Answer : b. Whenever the IOAT is +10°C or below and the air contains visible moisture

With a gas turbine engine, engine anti-icing should be selected ‘ON’: a. Whenever the igniters are on b. Whenever the IOAT is +10°C or below and the air contains visible moisture c. Whenever the TOAT is +10°C or below and it is raining d. Whenever the ice detector system warning light comes on

Description : With a gas turbine engine, engine anti-icing should be selected ON': a. Whenever the igniters are on b. Whenever the IOAT is +10°C or below and the air contains visible moisture c. Whenever ... is +10°C or below and it is raining d. Whenever the ice detector system warning light comes on

Last Answer : b. Whenever the IOAT is +10°C or below and the air contains visible moisture

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

What is the effect of inter cooling in gas turbines ?

Description : What is the effect of inter cooling in gas turbines ?

Last Answer : It decreases thermal efficiency but increases net output.

Why axial flow compressor is preferred for gas turbines for aeroplanes ?

Description : Why axial flow compressor is preferred for gas turbines for aeroplanes ?

Last Answer : Because it has low frontal area.

Why efficiency of gas turbines is lower compared to I.C. engines ?

Description : Why efficiency of gas turbines is lower compared to I.C. engines ?

Last Answer : In gas turbines, 70% of the output of gas turbine is consumed by compressor. I.C. engines have much lower auxiliary consumption. Further combustion temperature of I.C. engines is much higher compared to gas turbine.

It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Description : It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Last Answer : Brayton Cycle

Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C) Slow chemical reactions have generally high values of activation energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Description : Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C ... energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Last Answer : (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature

a zero-order reaction for every 10° rise of temperature, the rate is doubled. If the temperature is increased from 10°C to 100°C, the rate of the reaction will become: (1) 128 times (2) 256 times (3) 512 times (4) 64 times

Description : a zero-order reaction for every 10° rise of temperature, the rate is doubled. If the temperature is increased from 10°C to 100°C, the rate of the reaction will become: (1) 128 times (2) 256 times (3) 512 times (4) 64 times

Last Answer : 512times

2. In a zero-order reaction for every 10° rise of temperature, the rate is doubled. If the temperature is increased from 10°C to 100°C, the rate of the reaction will become: (1) 128 times (2) 256 times (3) 512 times (4) 64 times

Description : 2. In a zero-order reaction for every 10° rise of temperature, the rate is doubled. If the temperature is increased from 10°C to 100°C, the rate of the reaction will become: (1) 128 times (2) 256 times (3) 512 times (4) 64 times

Last Answer : 256 times

The engine produces dark black smoke due to a) Burning of oil b) Due of incomplete combustion c) Due to moisture in fuel d) None of these Ans. b

Description : The engine produces dark black smoke due to a) Burning of oil b) Due of incomplete combustion c) Due to moisture in fuel d) None of these Ans. b

Last Answer : ans b

The violent noises heard in an engine during the process of combustion after the position has passed over the top dead center is known as? 1. Stationary 2. Spark ignition 3. Detonation 4. all of these

Description : The violent noises heard in an engine during the process of combustion after the position has passed over the top dead center is known as? 1. Stationary 2. Spark ignition 3. Detonation 4. all of these

Last Answer :     <!-- [endif] -->ans 3

Which of the following types of internal combustion engine is generally used as portable engine for pumping and electricity generation? 1. Spark ignition 2. Stationary 3. Vertical single cylinder 3. all of these

Description : Which of the following types of internal combustion engine is generally used as portable engine for pumping and electricity generation? 1. Spark ignition 2. Stationary 3. Vertical single cylinder 3. all of these

Last Answer : ans 2

Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Description : Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Last Answer : External combustion engine

Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Description : Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Last Answer : Internal Combustion Engine

measures oxygen and temperature of the flue gas. a) Fuel efficiency monitor. b) Combustion analyzer. c) Contact thermometer. d) Infrared thermometer.

Description : measures oxygen and temperature of the flue gas. a) Fuel efficiency monitor. b) Combustion analyzer. c) Contact thermometer. d) Infrared thermometer.

Last Answer : Combustion analyzer

What Are Topping And Superposed Turbines?

Description : What Are Topping And Superposed Turbines?

Last Answer : Topping and superposed turbines arc highpressure, noncondensing units that can be added to an older, moderatepressure plant. Topping turbines receive highpressure steam from new highpressure boilers. The exhaust steam ... the same pressure as the old boilers and is used to supply the old turbines.

What Are The Two Basic Types Of Steam Turbines?

Description : What Are The Two Basic Types Of Steam Turbines?

Last Answer : 1. Impulse type. 2. Reaction type.

77. type of generator are made use in wind turbines. a) Recreational generators b) Synchronous generator c) Asynchronous generator d) Alternator

Description : 77. type of generator are made use in wind turbines. a) Recreational generators b) Synchronous generator c) Asynchronous generator d) Alternator

Last Answer : Asynchronous generator

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

The polar moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter of 6 cm will be a.137.5 cm4 b.107 dynes c.275 cm4 d.550 cm4 e.1100 cm4

Description : The polar moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter of 6 cm will be a.137.5 cm4 b.107 dynes c.275 cm4 d.550 cm4 e.1100 cm4

Last Answer : c. 275 cm4

Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area c.Same as moment of inertia d.The moment of inertia for an area relative to a line or axis parallel to the centroidal axis e.The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Description : Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area ... The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Last Answer : e. The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

If the temperature of intake air in internal combustion engine is lowered, the efficiency will a. increase b. decrease c. remains same d. increases upto certain limit and then decrease

Description : If the temperature of intake air in internal combustion engine is lowered, the efficiency will a. increase b. decrease c. remains same d. increases upto certain limit and then decrease

Last Answer : ANSWER a. increase

If the intake air temperature of Internal combustion engine increases, its efficiency will a. increase b. decrease c.remains same d unpredictable

Description : If the intake air temperature of Internal combustion engine increases, its efficiency will a. increase b. decrease c.remains same d unpredictable

Last Answer : ANSWER b. decrease

Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Description : Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Last Answer : Answer : d

. Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Description : . Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Last Answer : Option B

Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65

Description : Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65

Last Answer : Option B

The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Description : The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Last Answer : Answer : e

A gas has a volume of 27.3 c.c. at 0°C. Its volume at 10°C (if pressure remains unchanged) will be __________ c.c. (A) 2.73 (B) 28.3 (C) 273 (D) 283

Description : A gas has a volume of 27.3 c.c. at 0°C. Its volume at 10°C (if pressure remains unchanged) will be __________ c.c. (A) 2.73 (B) 28.3 (C) 273 (D) 283

Last Answer : (B) 28.3

Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Description : Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Last Answer : Answer : D

The settlement velocity of a solid (diameter 0.5 mm, specific gravity 1.75) in water having temperature 10°C, is A. 213.5 cm/sec B. 313.5 cm/sec C. 413.5 cm/sec D. 500 cm/sec

Description : The settlement velocity of a solid (diameter 0.5 mm, specific gravity 1.75) in water having temperature 10°C, is A. 213.5 cm/sec B. 313.5 cm/sec C. 413.5 cm/sec D. 500 cm/sec

Last Answer : ANS: B

The average temperature of sewage in India, is A. 10°C B. 15°C C. 20°C D. 25°C

Description : The average temperature of sewage in India, is A. 10°C B. 15°C C. 20°C D. 25°C

Last Answer : ANS: C

The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Description : The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Last Answer : Answer: A

In which type of climate does the temperature never rise above 10°C throughout the year?

Description : In which type of climate does the temperature never rise above 10°C throughout the year?

Last Answer : Tundra Climate

A Fahrenheit thermometer indicates a temperature of ‘ 14°F. its corresponding reading on the Celsius scale will be -----? A. – 2O°C B. – 10°C (Answer) C. + 10°C D. + 20°C

Description : A Fahrenheit thermometer indicates a temperature of ‘ 14°F. its corresponding reading on the Celsius scale will be -----? A. – 2O°C B. – 10°C (Answer) C. + 10°C D. + 20°C

Last Answer : B. – 10°C (Answer)

What is the life insulation if temperature increased by 10°C?

Description : What is the life insulation if temperature increased by 10°C?

Last Answer : The life of the machine insulation decreases by half if the temperature of the insulation increases by 10°C.

Citrus seeds can be stored with Charcoal at following temperature in dry conditions. a. 0-3°C b. 3-10°C c. 10-15°C d. Above 15°C

Description : Citrus seeds can be stored with Charcoal at following temperature in dry conditions. a. 0-3°C b. 3-10°C c. 10-15°C d. Above 15°C

Last Answer : 3-10°C

Date growth does not cease if temperature does not fall below: a. 0°C. b. 10°C c. 18°C d. 20°C

Description : Date growth does not cease if temperature does not fall below: a. 0°C. b. 10°C c. 18°C d. 20°C

Last Answer : 18°C

Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Description : Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Last Answer : 3) 50°C – 60°C

Thermal pollution of water increases its toxicity and oxidation of oxygen demanding waste besides favouring bacterial growth. A rise in water temperature by 10°C, doubles the toxic effects of __________ present in it. (A) Coal ash (B) Potassium cyanide (C) Ortho-xylene (D) None of these

Description : Thermal pollution of water increases its toxicity and oxidation of oxygen demanding waste besides favouring bacterial growth. A rise in water temperature by 10°C, doubles the toxic effects of __________ present in it. (A) Coal ash (B) Potassium cyanide (C) Ortho-xylene (D) None of these

Last Answer : (B) Potassium cyanide

The rate of a chemical reaction is almost doubled for every 10°C rise in temperature. The rate will increase __________ times, if the temperature rises from 10 to 100°C. (A) 256 (B) 512 (C) 112 (D) 612

Description : The rate of a chemical reaction is almost doubled for every 10°C rise in temperature. The rate will increase __________ times, if the temperature rises from 10 to 100°C. (A) 256 (B) 512 (C) 112 (D) 612

Last Answer : (B) 512

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

For every 10°C rise in temperature, the rate of chemical reaction doubles. When the temperature is increased from 30 to 70°C, the rate of reaction increases __________ times. (A) 8 (B) 12 (C) 16 (D) 32

Description : For every 10°C rise in temperature, the rate of chemical reaction doubles. When the temperature is increased from 30 to 70°C, the rate of reaction increases __________ times. (A) 8 (B) 12 (C) 16 (D) 32

Last Answer : (C) 16

Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Description : Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Last Answer : 0°C to 10°C

The reaction rate almost gets doubled for 10°C rise in temperature. This is due to the fact that the (A) Increased temperature reduces the activation energy (B) Fraction of molecules having threshold energy increases (C) Collision frequency increases (D) Value of threshold energy decreases

Description : The reaction rate almost gets doubled for 10°C rise in temperature. This is due to the fact that the (A) Increased temperature reduces the activation energy (B) Fraction of molecules having threshold energy increases (C) Collision frequency increases (D) Value of threshold energy decreases

Last Answer : (B) Fraction of molecules having threshold energy increases

Air intake for an air compressor should be preferably taken from (A) A site, where cooling towers are located nearby (B) A site, where open coal yard in located nearby (C) An air conditioned room maintained at a temperature of 18°C (D) An outside atmosphere at 10°C

Description : Air intake for an air compressor should be preferably taken from (A) A site, where cooling towers are located nearby (B) A site, where open coal yard in located nearby (C) An air conditioned room maintained at a temperature of 18°C (D) An outside atmosphere at 10°C

Last Answer : (D) An outside atmosphere at 10°C

A refrigerator is working on reversed carnot cycle between temperature of 30°C to –10°C with capacity of 10 tonnes. Calculate. (i) The COP (ii) Define ton of refrigeration (iii) Give the industrial application of refrigeration

Description : A refrigerator is working on reversed carnot cycle between temperature of 30°C to –10°C with capacity of 10 tonnes. Calculate. (i) The COP (ii) Define ton of refrigeration (iii) Give the industrial application of refrigeration

Last Answer : (ii) Ton of refrigeration: It is defined as the quantity of heat required to be removed from 1Ton water at 0oC to get ice at 0oC in one day. (iii) Industrial applications of refrigeration ... food stuff such as meat, fruit, fruit juice, vegetables etc. 5. Ice cooling of concrete for dam.

The efficiency of a internal combustion engine normally is of the order of a. 15-20 % b. 20-25% c. 25-30% d. 30-35%

Description : The efficiency of a internal combustion engine normally is of the order of a. 15-20 % b. 20-25% c. 25-30% d. 30-35%

Last Answer : ANSWER d. 30-35%

The most popular firing order in a 4-cylinder inline internal combustion engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-2-4-3

Description : The most popular firing order in a 4-cylinder inline internal combustion engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-2-4-3

Last Answer : ANSWER b. 1-3-4-2

Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of(A) Furnace oil with air(B) Furnace oil with oxygen(C) Blast furnace gas with air(D) Blast furnace gas with oxygen

Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen

Last Answer : (C) Blast furnace gas with air