DC Motors Application in Thermal Power Plant

DC Motors Application in Thermal Power Plant
by

1 Answer

Answer :

In thermal power plants dc motors are employed for certain control and critical emergency operations which are supplied by dedicated batteries. DC motors operate as backup drives for normal ac drive systems when ac power supply to the plant is lost.
In thermal power plant, the dc motors finds applications for performing control functions such as
Turbine governor motor
Governor limit setting
Motor operated rheostats
Emergency lubrication for the turbines (main, boiler feed pumps)
Generator (H2 oil seal).
DC motor operated valves
The emergency type services are of short duration. The emergency lube oil pump running time depends on the turbine-generator run-out time with vacuum or broken vacuum. The Hydrogen gas seal oil pump may be operated for 3 to 4 hours. The turbine-generator emergency bearing oil pumps provide lubrication, the emergency seal oil pumps maintain Hydrogen seal in case ac power is unavailable. The dc motor operated valves usually perform essential services, i.e., one ac and one dc operated valve in parallel or in series with each other will assure opening or closing, respectively.
DC motors employed in thermal plants are classified in to two types based on the type of application.
DC motors carrying out Control function
Dc motors carrying out Emergency function
Control functions:
This category consists of the turbine governor motor, governor limiting setting, motor operated rheostats, etc. These motors are small, about 1/8 hp or less. They are operated quite infrequently for short duration.
Emergency functions:
This category consists of turbine-generator emergency (lubrication) bearing oil pumps and emergency seal oil pumps. Such pumps may also be provided for steam turbine drives of feedwater pumps, fans, and other large loads. The lack of lubrication during a shutdown without ac power will ruin the linings of the bearings and damage the shaft.
Hydrogen seal oil pump is provided to prevent the escaping of hydrogen (for large turbine-generators hydrogen cooling is provided for efficient cooling) from the casing by providing a tight seal with high pressure oil.
by

Related questions

Handheld phase sequence indicators are useful when ________. A. preparing to parallel alternators B. connecting lighting branch circuits C. troubleshooting DC motors D. connecting shore power lines to the ship

Description : Handheld phase sequence indicators are useful when ________. A. preparing to parallel alternators B. connecting lighting branch circuits C. troubleshooting DC motors D. connecting shore power lines to the ship

Last Answer : Answer: D

An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. offer infinite speed variation D. all of the above

Description : An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. offer infinite speed variation D. all of the above

Last Answer : Answer: C

Universal motors will operate on AC or DC current, and are generally found in _____________. A. portable tools B. large pump motors C. turbo electric main motors D. forced draft fans

Description : Universal motors will operate on AC or DC current, and are generally found in _____________. A. portable tools B. large pump motors C. turbo electric main motors D. forced draft fans

Last Answer : Answer: A

Which of the following operating characteristics for DC motors is considered to give high starting torque? A. series B. shunt C. cumulative-compound D. differential-compound

Description : Which of the following operating characteristics for DC motors is considered to give high starting torque? A. series B. shunt C. cumulative-compound D. differential-compound

Last Answer : Answer: A

An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. can be started across the line D. offer a more effective means of controlling speed

Description : An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. can be started across the line D. offer a more effective means of controlling speed

Last Answer : Answer: D

Shunt, series, and compound wound motors, are all DC motors designed to operate from _____________. A. constant potential, variable current DC sources B. variable potential, constant current DC sources C. variable potential, variable current DC sources D. constant potential, constant current DC sources

Description : Shunt, series, and compound wound motors, are all DC motors designed to operate from _____________. A. constant potential, variable current DC sources B. variable potential, constant current DC ... C. variable potential, variable current DC sources D. constant potential, constant current DC sources

Last Answer : Answer: A

Which of the following types of DC motors has its field connected in parallel with its armature? A. Counter EMF B. Shunt C. Salient pole D. Series

Description : Which of the following types of DC motors has its field connected in parallel with its armature? A. Counter EMF B. Shunt C. Salient pole D. Series

Last Answer : Answer: B

What is the function of the interpoles installed in DC motors? A. To provide greater torque by strengthening the main field. B. To provide sparkless commutation without having to shift the brushes. C. To limit the production of counter-electromotive force. D. To limit the starting surge current.

Description : What is the function of the interpoles installed in DC motors? A. To provide greater torque by strengthening the main field. B. To provide sparkless commutation without having to shift the brushes. C. To limit the production of counter-electromotive force. D. To limit the starting surge current.

Last Answer : Answer: B

An across-the-line starter is typically used for which of the following applications? A. Reduced-current starting of large motors B. Low torque starting of small motors C. Low resistance starting of DC motors D. Full-voltage starting of motors

Description : An across-the-line starter is typically used for which of the following applications? A. Reduced-current starting of large motors B. Low torque starting of small motors C. Low resistance starting of DC motors D. Full-voltage starting of motors

Last Answer : Answer: D

The most common source of excitation for synchronous motors is a/an ______________. A. stepup transformer B. half-wave rectifier C. DC supply D. AC supply

Description : The most common source of excitation for synchronous motors is a/an ______________. A. stepup transformer B. half-wave rectifier C. DC supply D. AC supply

Last Answer : Answer: C

The most common source of excitation for synchronous motors is a/an _____________. A. low voltage battery B. motor attenuator set C. DC exciter generator D. AC supply

Description : The most common source of excitation for synchronous motors is a/an _____________. A. low voltage battery B. motor attenuator set C. DC exciter generator D. AC supply

Last Answer : Answer: C

What Is Dc Motors?

Description : What Is Dc Motors?

Last Answer : A DC motor is a mechanically commutated electric motor powered from direct current (DC). The stator is stationary in space by definition and therefore so is its current. The current in the ... the stator and rotor magnetic flux is maintained near 90 degrees, which generates the maximum torque.

What Are The Advantages And Disadvantages Of Ac, Dc Motors?

Description : What Are The Advantages And Disadvantages Of Ac, Dc Motors?

Last Answer : Advantages of AC Motors: Low cost, long life, high efficiency, large ratings available (to 1 MW or more), large number of standardized types. Disadvantages of AC Motors: Starting inrush current ... DC Motors: Some can be costly, Require a controller, Higher initial cost, Requires a controller.

How many types of DC motors are there?

Description : How many types of DC motors are there?

Last Answer : DC shunt motor: shunt motor speed varies slightly from no load to full load. DC series motor: series motor speed varies greatly as load changes. DC compound motor: the compound motor ... characteristics provided by the series field, while the shunt field provides for a relatively constant speed. 

Regenerative braking (A) Can be used for stopping a motor. (B) Cannot be easily applied to DC series motors. (C) Can be easily applied to DC shunt motors (D) Cannot be used when motor load has overhauling characteristics.

Description : Regenerative braking (A) Can be used for stopping a motor. (B) Cannot be easily applied to DC series motors. (C) Can be easily applied to DC shunt motors (D) Cannot be used when motor load has overhauling characteristics.

Last Answer : Ans: B Because reversal of Ia would also mean reversal of field and hence of Eb

As compared to shunt and compound DC motors, the series DC motor will have the highest torque because of its comparatively ____________ at the start. (A) Lower armature resistance. (B) Stronger series field. (C) Fewer series turns. (D) Larger armature current.

Description : As compared to shunt and compound DC motors, the series DC motor will have the highest torque because of its comparatively ____________ at the start. (A) Lower armature resistance. (B) Stronger series field. (C) Fewer series turns. (D) Larger armature current.

Last Answer : (D) Larger armature current.

Autotransformer starters or compensators are sometimes used with polyphase induction motors to _____________. A. reduce the voltage applied to the motor during the starting period B. increase the voltage for 'across-the-line starting' C. provide a backup means of voltage regulation for emergency starting D. allow the voltage to be either stepped up or down, depending on the application, to ensure full torque

Description : Autotransformer starters or compensators are sometimes used with polyphase induction motors to _____________. A. reduce the voltage applied to the motor during the starting period B. increase the voltage for ' ... to be either stepped up or down, depending on the application, to ensure full torque

Last Answer : Answer: A

Which of the following statements represents an application of a silicon controlled rectifier? A. To provide DC power for a main propulsion motor. B. For use as a voltage reference diode. C. For sensing flame in an automated burner. D. To eliminate power supply hum.

Description : Which of the following statements represents an application of a silicon controlled rectifier? A. To provide DC power for a main propulsion motor. B. For use as a voltage reference diode. C. For sensing flame in an automated burner. D. To eliminate power supply hum.

Last Answer : Answer: A

If overloading a DC machine becomes necessary in an emergency, you should ____________. A. cool the machine with portable blowers and fans B. hold thermal overload relays open with blocks of wood C. inject small amounts of CO2 into the windings for cooling D. increase the residual magnetism value of windings to reduce eddy currents

Description : If overloading a DC machine becomes necessary in an emergency, you should ____________. A. cool the machine with portable blowers and fans B. hold thermal overload relays open with blocks of ... the windings for cooling D. increase the residual magnetism value of windings to reduce eddy currents

Last Answer : Answer: A

How do I connect 180 DC motors to LiPo batteries and how to control their speed?

Description : How do I connect 180 DC motors to LiPo batteries and how to control their speed?

Last Answer : A brushless DC electric motor ( BLDC motor or BL motor), also known as electronically commutated motor (ECM or EC motor) and synchronous DC motors , are synchronous motors powered by direct current ... provides pulses of current to the motor windings that control the speed and torque of the motor.

DC motors converts electrical into ___ energy. A. Mechanical B. Wind C. Electric D. None

Description : DC motors converts electrical into ___ energy. A. Mechanical B. Wind C. Electric D. None

Last Answer : A. Mechanical  

Stepper motors are_____ A. AC motors B. DC motors C. Electromagnets D. None of above

Description : Stepper motors are_____ A. AC motors B. DC motors C. Electromagnets D. None of above

Last Answer : B. DC motors

Why are DC motors used in trains and not AC motors ?

Description : Why are DC motors used in trains and not AC motors ?

Last Answer : The reason is torque. torque is inversely proportional to speed..i.e when th knowe train comes to rest position to motion.. initial speed is zero..so it requires high starting torque for ... current will flow through field and armature coils then maximum torque is available at the intial condition.

Which of the following motors can run on both AC and DC?

Description : Which of the following motors can run on both AC and DC? A) Universal motor B) Dual wattage motor C) Flexible motor D) All the above

Last Answer : Which of the following motors can run on both AC and DC? A) Universal motor B) Dual wattage motor C) Flexible motor D) All the above

DC motors are still preferred for use in: -

Description :  DC motors are still preferred for use in: -  a) Electric excavators steel mills and cranes b) Lathes and machine tools c) Flour mills and jaw crushers d) Paper industry

Last Answer :  DC motors are still preferred for use in: - Electric excavators steel mills and cranes

Difference between ac and DC motors......?

Last Answer : Ac motor required AC power supply while DC motor required DC power supply.  AC motor do not have commutator and DC motor have commutator.  Speed of Ac motor can be varied by ... or three phase but DC motor can only be single phase.

Complete maintenance of electrical motors should include periodic checks for machine _____________. A. vibration B. watertight integrity C. speed droop D. reactive power

Description : Complete maintenance of electrical motors should include periodic checks for machine _____________. A. vibration B. watertight integrity C. speed droop D. reactive power

Last Answer : Answer: A

The operator of electrical motors should keep a constant check on the loads they carry because _____________. A. low loads necessitate frequent insulation cleaning B. exceeding nameplate values shortens useful life C. energy is wasted if full loading is not utilized D. power factor correction methods are load dependent

Description : The operator of electrical motors should keep a constant check on the loads they carry because _____________. A. low loads necessitate frequent insulation cleaning B. exceeding nameplate values shortens ... wasted if full loading is not utilized D. power factor correction methods are load dependent

Last Answer : Answer: B

The air gap provided in induction motors should be checked periodically with a feeler gage to detect an unequal air gap and _____________. A. decreased motor magnetizing current B. hysteresis loses C. increased power factor D. mechanical damage to the rotor

Description : The air gap provided in induction motors should be checked periodically with a feeler gage to detect an unequal air gap and _____________. A. decreased motor magnetizing current B. hysteresis loses C. increased power factor D. mechanical damage to the rotor

Last Answer : Answer: D

Which of the following types of motors is often designed for use in correcting power factor? A. Polyphase B. Wound-rotor C. Induction D. Synchronous

Description : Which of the following types of motors is often designed for use in correcting power factor? A. Polyphase B. Wound-rotor C. Induction D. Synchronous

Last Answer : Answer: D

Name the different types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Description : Name the different types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Last Answer : A: Following motors are used: - Vacuum cleaners- Universal motor. Phonographic appliances - Hysteresis motor. Vending machines - Shaded pole motor. Refrigerators - Capacitor split phase ... Cumulative motors. Lathes - DC shunt motors. Power factor improvement - Synchronous motors.

Name the types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Description : Name the types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Last Answer : Following motors are used: - Vacuum cleaners- Universal motor. Phonographic appliances - Hysteresis motor. Vending machines - Shaded pole motor. Refrigerators - Capacitor split phase ... Cumulative motors. Lathes - DC shunt motors. Power factor improvement - Synchronous motors.

Which of the following station is least efficient........ A.Nuclear power plant B.Diesel power station C.Thermal power station D.None of the above

Description : Which of the following station is least efficient........ A.Nuclear power plant B.Diesel power station C.Thermal power station D.None of the above

Last Answer : Ans: C

Which of the following power plant have longest physical life? a) Thermal power plant b) Nuclear power plant c) Hydroelectric power plant d) Diesel power plant

Description : Which of the following power plant have longest physical life? a) Thermal power plant b) Nuclear power plant c) Hydroelectric power plant d) Diesel power plant

Last Answer : Ans: C

Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have highest operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Description : Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have ... a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Last Answer : Ans: B

The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Description : The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Last Answer : Ans: D

What are different types of circuit breakers employed in thermal power plant?

Description : What are different types of circuit breakers employed in thermal power plant?

Last Answer : Answer: For low voltage operation 415/220V vacuum circuit breakers or air break circuit breakers are employed. For voltage ratings about 6.6kV and beyond SF6 circuit breakers are employed.

How Generator Transformer is cooled in Thermal Power Plant?

Description : How Generator Transformer is cooled in Thermal Power Plant?

Last Answer : Answer: MVA power rating of the Generator Transformer will be equal to the alternator. Hence lot of heat will be generated while generator transformer is under operation. Oil Forced Air Forced (OFAF) type of cooling is employed for generator transformer

What are the major electric systems in Thermal Power Plant?

Description : What are the major electric systems in Thermal Power Plant?

Last Answer : Answer: Major electrical equipment in thermal power plant are • Turbine Generator • Exciter System • Generator Protection System • Generator Transformer • HT/LT switch gear • Electrical Switch-yard

What is the largest pump in the thermal power plant?

Description : What is the largest pump in the thermal power plant?

Last Answer : Answer: In thermal power plant Boiler Feed Pump (BFP) is the largest pump, it delivers the water to the boiler.

What are different types of circuit breakers employed in thermal power plant?

Description : What are different types of circuit breakers employed in thermal power plant?

Last Answer : For low voltage operation 415/220V vacuum circuit breakers or air break circuit breakers are employed. For voltage ratings about 6.6kV and beyond SF6 circuit breakers are employed.

How Generator Transformer is cooled in Thermal Power Plant?

Description : How Generator Transformer is cooled in Thermal Power Plant?

Last Answer : MVA power rating of the Generator Transformer will be equal to the alternator. Hence lot of heat will be generated while generator transformer is under operation. Oil Forced Air Forced (OFAF) type of cooling is employed for generator transformer

What are the major electric systems in Thermal Power Plant?

Description : What are the major electric systems in Thermal Power Plant?

Last Answer : Major electrical equipment in thermal power plant are Turbine Generator Exciter System Generator Protection System Generator Transformer HT/LT switch gear Electrical Switch-yard

Why the Thermal efficiency of the steam power plant is quite low?

Description : Why the Thermal efficiency of the steam power plant is quite low?

Last Answer : In Steam power station, more than 50% of the total heat of combustion is lost as heat rejected to the condenser and the loss is unavoidable as the heat energy cannot be converted in to mechanical ... lowest temperature. This is the reason that the thermal efficiency of the power plant is quite low.

What is the overall efficiency of the Thermal Power Plant or Steam Power Plant?

Description : What is the overall efficiency of the Thermal Power Plant or Steam Power Plant?

Last Answer : Overall efficiency of the system is defined as the ratio of heat equivalent of electrical output to the heat of combustion. Generally Overall efficiency of the steam plant will always be ... by multiplying the thermal efficiency of the plant with efficiency of the generator (electrical efficiency)

What is the Thermal efficiency of steam power plant?

Description : What is the Thermal efficiency of steam power plant?

Last Answer : Thermal efficiency of steam power plant is defined as the ratio of heat equivalent of mechanical energy transmitted to the turbine shaft to the heat of combustion. Generally Thermal efficiency of the steam power plant will be in the range of 30-35%

What are the main circuits in the Thermal Power Plant?

Description : What are the main circuits in the Thermal Power Plant?

Last Answer : Thermal Power plant consists of four main circuits, they are: Feed water and steam flow circuit Coal and ash circuit Air and gas circuit Cooling water circuit

Explain the working of thermal power plant.

Description : Explain the working of thermal power plant.

Last Answer : It uses coal as the primary fuel to boil the water available to superheated steam for driving the steam turbine. The steam turbine is then mechanically coupled to an alternator rotor, the rotation of which results in the generation of electric power.

Which of the following in an application of D.C. motors? (a) Traction (b) Drives for process industry (c) Battery driven vehicles (d) Automatic control (e) All of the above

Description : Which of the following in an application of D.C. motors? (a) Traction (b) Drives for process industry (c) Battery driven vehicles (d) Automatic control (e) All of the above

Last Answer : (e) All of the above