What are different types of busbar arrangement Schemes in Substations?

What are different types of busbar arrangement Schemes in Substations?
by

1 Answer

Answer :

Different switching schemes or busbar arrangement scheme employed in switch-yard are:
Single Bus Scheme
Double bus single breaker scheme
Main and Transfer busbar scheme
Double bus single breaker scheme
Breaker and half scheme
Ring main bus scheme
by

Related questions

What are different insulators employed in substations?

Description : What are different insulators employed in substations?

Last Answer : Some of the insulators employed in substations are: Pin insulators Post insulators Strain insulators Suspension insulators Hallow apparatus insulators Dead-end insulators Solid core insulators

What is the significance of Corona rings in substations?

Description : What is the significance of Corona rings in substations?

Last Answer : It is observed that corona discharge occurs mostly at sharp corners, edges near the conductor fixing points. Corona rings also called grading rings are hallow metallic rings having large diameter ... is reduced to much lower value Corona discharge is eliminated Dust deposition is also minimized

Factors on which material of station busbar depends?

Description : Factors on which material of station busbar depends?

Last Answer : Some of the factors on which station busbar depends are: Current Carrying capacity Short Circuit Stresses Establishing minimum electrical clearances

Which type of bus arrangement is costlier and more reliable?

Description : Which type of bus arrangement is costlier and more reliable?

Last Answer : One and half breaker scheme is most reliable and costlier scheme. In one and half breaker scheme 3 circuit breakers are provided for 2 bus-bars. Hence the name is coined as One and half breaker scheme

What are different Bus bar materials used in Substation?

Description : What are different Bus bar materials used in Substation?

Last Answer : Busbars are generally made of copper and Aluminum. Aluminim has the advantage of one third the weight of the copper and also Aluminum requires less maintenance and proper use of alloys provide necessary rigidity required for bus material. Aluminum is used widely in EHV and HV stations

What are the different electrical clearances in Substation?

Description : What are the different electrical clearances in Substation?

Last Answer : Ground Clearance: This is the minimum distance between any live conductor and the earth or ground. Phase Clearance: It is the clearance between the different phases in a circuit or same phases in different ... The limits of work section may be ground or the platform on which the person is working.

What are the different substation components

Description : What are the different substation components

Last Answer : Circuit Breakers, Disconnecting switches, Grounding switches, Current Transformers, Potential Transformers or Capacitor voltage Transformers, Line Traps, Lightning Arrestors, Power Transformers, Shunt ... Station Buses and Insulators, Grounding system, Series capacitors and shunt capacitors.

What is the first equipment of the substation connected to the incoming transmission line?

Description : What is the first equipment of the substation connected to the incoming transmission line?

Last Answer : Lightning arrestor is the first equipment of the substation connecting the incoming transmission lines. It protects other substation equipment from lightning and switching surges by suppressing them to ... between both the ends of major equipment such as power transformers for protection.

Why EHV busbars are hallowed and circular?

Description : Why EHV busbars are hallowed and circular?

Last Answer : Answer: To avoid corona effect

For distribution network which type of Switching scheme is employed?

Description : For distribution network which type of Switching scheme is employed?

Last Answer : For distribution network Ring Main busbar scheme is employed. It has the provision that if power interruption occurs to one bus section due to maintenance or fault, power can be fed the bus from other side of the power system.

What is the neutral point earthing and its advantages?

Description : What is the neutral point earthing and its advantages?

Last Answer : In substation all the neutrals of rotating machines, transformers, busbars and other equipment are connected to ground. Some of the advantages are: Earth fault protection is based on the method of ... , grounding of neutral helps to reduce the over-voltages which occur on the one healthy phases

What are the disadvantages of corona?

Description : What are the disadvantages of corona?

Last Answer : Some of the disadvantages of corona are: Corona causes power loss Corona causes unacceptable noise Corona cause radio interference

What is Basic Impulse Level (BIL)?

Description : What is Basic Impulse Level (BIL)?

Last Answer : Basic Impulse Level (BIL) refer to the peak value of lightning impuse voltage withstand capability of the equipment

What is creepage distance?

Description : What is creepage distance?

Last Answer : Creepage distance is the shortest distance between two conducting points along the surface of the insulating material.

Which of the following busbar arrangement is generally employed in distribution system: a) One-and-half breaker arrangement b) Main and transfer arrangement c) Ring main distribution system d) Single busbar arrangement system

Description : Which of the following busbar arrangement is generally employed in distribution system: a) One-and-half breaker arrangement b) Main and transfer arrangement c) Ring main distribution system d) Single busbar arrangement system

Last Answer : Ans: C

State the condition for selecting site for distribution substation.

Description : State the condition for selecting site for distribution substation. 

Last Answer : Following condition should be considered while selecting site for distribution sub-station:-  1. Near load center :  Sub-station should be located near load center to reduce cost of Transmission and ... free from earthquake :  To avoid damage to sub-station area should be free earth quake. 

State the classification of distribution substation.

Description : State the classification of distribution substation. 

Last Answer : The classification of distribution substation. 1. Pole mounted distribution substation 2. Plinth mounted distribution substation 3. Compact/prefabricated distribution substation 4. ... Indoor distribution substation 6. Outdoor distribution substation 7. Mobile distribution substation 

What is the purpose of auxiliary controller in substation?

Description : What is the purpose of auxiliary controller in substation?

Last Answer : The systems of substation auxiliaries ensure operation of substations providing internal consumers of substations with operating direct and alternating currents. Any breakdown (loss) of auxiliary systems ... whole substation, as well as serious problems during its subsequent putting into operation.

Classification of Substation According to Method of Construction

Description : Classification of Substation According to Method of Construction

Last Answer : Classification of Substation According to Method of Construction:- 1. Indoor Substation 2. Outdoor Substation 3. Gas insulated Substation 4. Underground Substation 5. Pole mounted substation 6. Plinth Substation 7. Compact/prefabricated substation

Isolator in substation is open under ___________ condition?

Description : Isolator in substation is open under ___________ condition?  (A) No load (B) Short circuit (C) Full load (D) None of the above

Last Answer : no load

What does a substation do?

Description : What does a substation do?

Last Answer : At  the  substations,  power  is  boosted  up  for  long  distance  transmission.

Gas Insulated Substations Advantages Disadvantages

Description : Gas Insulated Substations Advantages Disadvantages

Last Answer : Gas Insulated Substations (GIS): Gas Insulated Substations (GIS) are differ from Air Insulated Substations (substations we usually see) such that all the substation equipment such as busbars, circuit breakers ... in the pressure of the SF6 gas in any module results in flash overs and faults

Why busbar protection is needed?

Description : Why busbar protection is needed?

Last Answer : (a) Fault level at busbar is high (b) The stability of the system is affected by the faults in the bus zone. (c) A fault in the bus bar causes interruption of supply to a large portion of the system network.

What are the protections are there for BUSBAR?

Description : What are the protections are there for BUSBAR?

Last Answer : Instantaneous over current protection Bus bar differential protection Local breaker back up protection 

For cost and safety, the outdoor substations are installed for voltages above (a) 11 kV (b) 33 kV (c) 60kV (d) 110kV

Description : For cost and safety, the outdoor substations are installed for voltages above (a) 11 kV (b) 33 kV (c) 60kV (d) 110kV

Last Answer : (b) 33 kV

Substations.....

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA.

Last Answer : Substations  Substations are the places where the level of voltage undergoes change with the help of transformers. Apart from transformers a substation will house switches (called circuit breakers), meters, relays ... 6 kV/400 V distribution transformer.  Version 2 EE IIT, Kharagpur 

For cost and safety, the outdoor substations are installed for voltages above?

Last Answer : For cost and safety, the outdoor substations are installed for voltages above 33 kV.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

Explain differential protection of busbar.

Description : Explain differential protection of busbar.

Last Answer : Differential protection Scheme for bus bar: Under normal conditions the sum of the currents entering the bus bar zone is equal to those leaving it and no current flows through the relay ... . The difference of these currents will flow through the relay coil causing opening of circuit breaker.

State factors deciding size of busbar chamber for commercial installation.

Description : State factors deciding size of busbar chamber for commercial installation.

Last Answer : Size of busbar chamber depends on following factors.  Total load or load current on installation Future load on installation No. of tappings provided on buabar Spare feeders provided if any ... . Incoming and outgoing wires or cables are connected to bus-bar by screw and nut arrangement. 

State function of Busbar and which material is used for busbar?

Description : State function of Busbar and which material is used for busbar?

Last Answer : Function of Busbar Bus-bar: - Distribute the load on 3-phase four wire systems. To provide number of connection of incoming line and to provide easy way to connect number of sub circuit. ... to the element. This element means busbar Material is used for busbar: 1. Copper 2. Alluminium

What are the types of encryption schemes ?

Description : What are the types of encryption schemes ?

Last Answer : There are two types of encryption schemes, namely: a) Symmetric or secret-key encryption. B) Asymmetric or public-key encryption.

What is copy of a theme with different color schemes called?

Description : What is copy of a theme with different color schemes called?

Last Answer : B ig D ick

Can a Tablespace hold objects from different Schemes ?

Description : Can a Tablespace hold objects from different Schemes ?

Last Answer : Yes.

Can a tablespace hold objects from different schemes?

Description : Can a tablespace hold objects from different schemes?

Last Answer : Yes.

We candivide ____ into two different schemes: synchronousor statistical. A) FDM B) TDM C) WDM D) none of the above

Description : We candivide ____ into two different schemes: synchronousor statistical. A) FDM B) TDM C) WDM D) none of the above

Last Answer : TDM

Can a Tablespace hold objects from different Schemes?

Description : Can a Tablespace hold objects from different Schemes?

Last Answer : Yes.

What will be the total output voltage if four 1.5 volt batteries are connected in a series-parallel arrangement as shown in the illustration? EL-0039 A. 1.5 volts B. 3.0 volts C. 4.5 volts D. 6.0 volts

Description : What will be the total output voltage if four 1.5 volt batteries are connected in a series-parallel arrangement as shown in the illustration? EL-0039 A. 1.5 volts B. 3.0 volts C. 4.5 volts D. 6.0 volts

Last Answer : Answer: B

In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes more efficient at lower capacitance. C. the arrangement allows the coupling of the signal while it isolates the biasing of each stage. D. good frequency response.

Description : In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes ... of the signal while it isolates the biasing of each stage. D. good frequency response.

Last Answer : Answer: C

In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the same NOR and NAND inputs D. have output conditions that are exact opposites to the output condition for OR and AND, respectively

Description : In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the ... . have output conditions that are exact opposites to the output condition for OR and AND, respectively

Last Answer : Answer: D

In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Description : In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Last Answer : Answer: D

What does the arrangement at coordinates '62E' shown in the illustration represent? EL-0099 A. Position recording drum and stylus B. Temperature compensating thyristor C. Miniature bridge rectifier D. Twisted wire pair within a shield

Description : What does the arrangement at coordinates '62E' shown in the illustration represent? EL-0099 A. Position recording drum and stylus B. Temperature compensating thyristor C. Miniature bridge rectifier D. Twisted wire pair within a shield

Last Answer : Answer: D

Component 'C' in section 'I' shown in the illustration represent ____________. EL-0093 A. a selectable holding coil arrangement B. a 'fuse blown' indicator circuit C. 'reset' and 'trouble' lamps D. a handset with switch and voice elements

Description : Component 'C' in section 'I' shown in the illustration represent ____________. EL-0093 A. a selectable holding coil arrangement B. a 'fuse blown' indicator circuit C. 'reset' and 'trouble' lamps D. a handset with switch and voice elements

Last Answer : Answer: D

The diagrams shown in the illustration represent a/an _______________. EL-0093 A. engine order telegraph circuit B. rudder angle indicator arrangement C. engine speed tachometer with repeaters D. sound powered telephone system

Description : The diagrams shown in the illustration represent a/an _______________. EL-0093 A. engine order telegraph circuit B. rudder angle indicator arrangement C. engine speed tachometer with repeaters D. sound powered telephone system

Last Answer : Answer: D

The seven segment arrangement for numerical display on consoles, test meters and other applications can be either ________________. A. UJT or BJT B. BCD or OCD C. JFET or IGFET D. LED or LCD

Description : The seven segment arrangement for numerical display on consoles, test meters and other applications can be either ________________. A. UJT or BJT B. BCD or OCD C. JFET or IGFET D. LED or LCD

Last Answer : Answer: D

Which of the listed figures shown in the illustration represents devices connected in a three-phase delta-delta arrangement? EL-0084 A. A B. B C. C D. D

Description : Which of the listed figures shown in the illustration represents devices connected in a three-phase delta-delta arrangement? EL-0084 A. A B. B C. C D. D

Last Answer : Answer: A

Which of the listed figures shown in the illustration represents devices connected in a three-phase delta-wye arrangement? EL-0084 A. A B. B C. C D. D

Description : Which of the listed figures shown in the illustration represents devices connected in a three-phase delta-wye arrangement? EL-0084 A. A B. B C. C D. D

Last Answer : Answer: C

Which of the listed figures shown in the illustration represents devices connected in a three-phase wye-delta arrangement? EL-0084 A. A B. B C. C D. D

Description : Which of the listed figures shown in the illustration represents devices connected in a three-phase wye-delta arrangement? EL-0084 A. A B. B C. C D. D

Last Answer : Answer: D

Which of the listed figures shown in the illustration represents devices connected in a three-phase wye-wye arrangement? EL-0084 A. A B. B C. C D. D

Description : Which of the listed figures shown in the illustration represents devices connected in a three-phase wye-wye arrangement? EL-0084 A. A B. B C. C D. D

Last Answer : Answer: B