Factors on which material of station busbar depends?

Factors on which material of station busbar depends?
by

1 Answer

Answer :

Some of the factors on which station busbar depends are:
Current Carrying capacity
Short Circuit Stresses
Establishing minimum electrical clearances
by

Related questions

What are different types of busbar arrangement Schemes in Substations?

Description : What are different types of busbar arrangement Schemes in Substations?

Last Answer : Different switching schemes or busbar arrangement scheme employed in switch-yard are: Single Bus Scheme Double bus single breaker scheme Main and Transfer busbar scheme Double bus single breaker scheme Breaker and half scheme Ring main bus scheme

What is the first equipment of the substation connected to the incoming transmission line?

Description : What is the first equipment of the substation connected to the incoming transmission line?

Last Answer : Lightning arrestor is the first equipment of the substation connecting the incoming transmission lines. It protects other substation equipment from lightning and switching surges by suppressing them to ... between both the ends of major equipment such as power transformers for protection.

What are different Bus bar materials used in Substation?

Description : What are different Bus bar materials used in Substation?

Last Answer : Busbars are generally made of copper and Aluminum. Aluminim has the advantage of one third the weight of the copper and also Aluminum requires less maintenance and proper use of alloys provide necessary rigidity required for bus material. Aluminum is used widely in EHV and HV stations

Why EHV busbars are hallowed and circular?

Description : Why EHV busbars are hallowed and circular?

Last Answer : Answer: To avoid corona effect

What are the different electrical clearances in Substation?

Description : What are the different electrical clearances in Substation?

Last Answer : Ground Clearance: This is the minimum distance between any live conductor and the earth or ground. Phase Clearance: It is the clearance between the different phases in a circuit or same phases in different ... The limits of work section may be ground or the platform on which the person is working.

For distribution network which type of Switching scheme is employed?

Description : For distribution network which type of Switching scheme is employed?

Last Answer : For distribution network Ring Main busbar scheme is employed. It has the provision that if power interruption occurs to one bus section due to maintenance or fault, power can be fed the bus from other side of the power system.

Which type of bus arrangement is costlier and more reliable?

Description : Which type of bus arrangement is costlier and more reliable?

Last Answer : One and half breaker scheme is most reliable and costlier scheme. In one and half breaker scheme 3 circuit breakers are provided for 2 bus-bars. Hence the name is coined as One and half breaker scheme

What are the different substation components

Description : What are the different substation components

Last Answer : Circuit Breakers, Disconnecting switches, Grounding switches, Current Transformers, Potential Transformers or Capacitor voltage Transformers, Line Traps, Lightning Arrestors, Power Transformers, Shunt ... Station Buses and Insulators, Grounding system, Series capacitors and shunt capacitors.

What is the neutral point earthing and its advantages?

Description : What is the neutral point earthing and its advantages?

Last Answer : In substation all the neutrals of rotating machines, transformers, busbars and other equipment are connected to ground. Some of the advantages are: Earth fault protection is based on the method of ... , grounding of neutral helps to reduce the over-voltages which occur on the one healthy phases

What is the significance of Corona rings in substations?

Description : What is the significance of Corona rings in substations?

Last Answer : It is observed that corona discharge occurs mostly at sharp corners, edges near the conductor fixing points. Corona rings also called grading rings are hallow metallic rings having large diameter ... is reduced to much lower value Corona discharge is eliminated Dust deposition is also minimized

What are the disadvantages of corona?

Description : What are the disadvantages of corona?

Last Answer : Some of the disadvantages of corona are: Corona causes power loss Corona causes unacceptable noise Corona cause radio interference

What is Basic Impulse Level (BIL)?

Description : What is Basic Impulse Level (BIL)?

Last Answer : Basic Impulse Level (BIL) refer to the peak value of lightning impuse voltage withstand capability of the equipment

What is creepage distance?

Description : What is creepage distance?

Last Answer : Creepage distance is the shortest distance between two conducting points along the surface of the insulating material.

What are different insulators employed in substations?

Description : What are different insulators employed in substations?

Last Answer : Some of the insulators employed in substations are: Pin insulators Post insulators Strain insulators Suspension insulators Hallow apparatus insulators Dead-end insulators Solid core insulators

State the condition for selecting site for distribution substation.

Description : State the condition for selecting site for distribution substation. 

Last Answer : Following condition should be considered while selecting site for distribution sub-station:-  1. Near load center :  Sub-station should be located near load center to reduce cost of Transmission and ... free from earthquake :  To avoid damage to sub-station area should be free earth quake. 

State the classification of distribution substation.

Description : State the classification of distribution substation. 

Last Answer : The classification of distribution substation. 1. Pole mounted distribution substation 2. Plinth mounted distribution substation 3. Compact/prefabricated distribution substation 4. ... Indoor distribution substation 6. Outdoor distribution substation 7. Mobile distribution substation 

What is the purpose of auxiliary controller in substation?

Description : What is the purpose of auxiliary controller in substation?

Last Answer : The systems of substation auxiliaries ensure operation of substations providing internal consumers of substations with operating direct and alternating currents. Any breakdown (loss) of auxiliary systems ... whole substation, as well as serious problems during its subsequent putting into operation.

Classification of Substation According to Method of Construction

Description : Classification of Substation According to Method of Construction

Last Answer : Classification of Substation According to Method of Construction:- 1. Indoor Substation 2. Outdoor Substation 3. Gas insulated Substation 4. Underground Substation 5. Pole mounted substation 6. Plinth Substation 7. Compact/prefabricated substation

Isolator in substation is open under ___________ condition?

Description : Isolator in substation is open under ___________ condition?  (A) No load (B) Short circuit (C) Full load (D) None of the above

Last Answer : no load

What does a substation do?

Description : What does a substation do?

Last Answer : At  the  substations,  power  is  boosted  up  for  long  distance  transmission.

State factors deciding size of busbar chamber for commercial installation.

Description : State factors deciding size of busbar chamber for commercial installation.

Last Answer : Size of busbar chamber depends on following factors.  Total load or load current on installation Future load on installation No. of tappings provided on buabar Spare feeders provided if any ... . Incoming and outgoing wires or cables are connected to bus-bar by screw and nut arrangement. 

Which of the following busbar arrangement is generally employed in distribution system: a) One-and-half breaker arrangement b) Main and transfer arrangement c) Ring main distribution system d) Single busbar arrangement system

Description : Which of the following busbar arrangement is generally employed in distribution system: a) One-and-half breaker arrangement b) Main and transfer arrangement c) Ring main distribution system d) Single busbar arrangement system

Last Answer : Ans: C

Why busbar protection is needed?

Description : Why busbar protection is needed?

Last Answer : (a) Fault level at busbar is high (b) The stability of the system is affected by the faults in the bus zone. (c) A fault in the bus bar causes interruption of supply to a large portion of the system network.

What are the protections are there for BUSBAR?

Description : What are the protections are there for BUSBAR?

Last Answer : Instantaneous over current protection Bus bar differential protection Local breaker back up protection 

State function of Busbar and which material is used for busbar?

Description : State function of Busbar and which material is used for busbar?

Last Answer : Function of Busbar Bus-bar: - Distribute the load on 3-phase four wire systems. To provide number of connection of incoming line and to provide easy way to connect number of sub circuit. ... to the element. This element means busbar Material is used for busbar: 1. Copper 2. Alluminium

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

Explain differential protection of busbar.

Description : Explain differential protection of busbar.

Last Answer : Differential protection Scheme for bus bar: Under normal conditions the sum of the currents entering the bus bar zone is equal to those leaving it and no current flows through the relay ... . The difference of these currents will flow through the relay coil causing opening of circuit breaker.

List the factors to be considered while choosing a site for steam power station:

Description : List the factors to be considered while choosing a site for steam power station:

Last Answer : 1.Supply of fuel 2.Availability of water 3.Transportation facilities 4.Cost and type of land 5.Nearness to load centres 6.Distance from populated area

Factors on which soil resistance depends: a) depth of the electrode b) moisture c) Nacl d) all the above

Description : Factors on which soil resistance depends: a) depth of the electrode b) moisture c) Nacl d) all the above

Last Answer : Ans: D

On what factors efficiency (thermal) of the steam plant depends?

Description : On what factors efficiency (thermal) of the steam plant depends?

Last Answer : Efficiency of the thermal plant depends on three factors, they are pressure of steam entering the turbine temperature of the steam entering the turbine pressure in the condenser Thermal efficiency ... as low as possible. Thermal efficiency also increases by reheating the steam between turbine stages

Mention the factors on which hysteresis loss depends?

Description : Mention the factors on which hysteresis loss depends?

Last Answer : (i) Quality and amount of iron in the core (ii) Flux density and (iii) Frequency.

What are the factors on which the capacity of the battery depends?

Description : What are the factors on which the capacity of the battery depends?

Last Answer : The capacity of the battery is measured in ampere-hour. The capacity of the battery depends upon the following factors. a. Number and area of the positive plate. b. Discharge voltage ... . Temperature. When the temperature increases the resistance of the battery decreases and the capacity increases.

Explain any six factors on which selection of material handling device depends.

Description : Explain any six factors on which selection of material handling device depends.

Last Answer : Factors Affecting the selection of Materials Handling Devices/Equipment: [1] Adaptability: The load carrying and movement characteristics of the equipment should fit the materials handling problem. [2] ... The consideration of the cost of the MH Equipment is an obvious factor in its selection

The basic control action of a magnetic amplifier depends upon _____________. A. variations in the load capacitance B. changes in inductance C. type of core material D. construction of the core

Description : The basic control action of a magnetic amplifier depends upon _____________. A. variations in the load capacitance B. changes in inductance C. type of core material D. construction of the core

Last Answer : Answer: B

Enlist the factors affecting on selection of survey station or survey line in chain survey.

Description : Enlist the factors affecting on selection of survey station or survey line in chain survey.

Last Answer : Following are the factors affecting on selection of survey station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole ... level ground. 9) The survey lines should run as far as possible nearer to object.

State any four factors governing Selection of site for thermal power station.

Description : State any four factors governing Selection of site for thermal power station. 

Last Answer : Following Factors are to be considered:- 1. It should locate near coal mine. 2. Sufficient quantity of water should be available. 3. Sufficient large space should be available. 4. It should be located ... laws of the land and the town planning. 14. The interests of national defense must be served.

If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say

Description : If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say

Last Answer : a.more

Mention the factors on which the land-use pattern of India depends on. -Geography

Description : Mention the factors on which the land-use pattern of India depends on. -Geography

Last Answer : There are two main factors on which the land use pattern of India depends upon. The factors are- Physical factors and Human factors : 1. Physical factors: The physical factors ... factors: The human factors comprise population density, culture, and traditions, technological capability, etc.

Name some factors on which farming practice in India depends. -Geography

Description : Name some factors on which farming practice in India depends. -Geography

Last Answer : Due to a long growing season, various types of soils, climate, and large agricultural area, India is an important producer of many crops. The factors on which farming practice in India ... b) Socio-economic factors which include demand for food/cash crops, technology, labour and organization.

Name any two factors on which resource development depends. -SST 10th

Description : Name any two factors on which resource development depends. -SST 10th

Last Answer : (i) Technology (ii) Quality of human resources.

Economic development of a country depends on which factors and what is the role of democracy in it? -SST 10th

Description : Economic development of a country depends on which factors and what is the role of democracy in it? -SST 10th

Last Answer : In matters of economic development, not all the democracies get developed because of various factors like population, lack of basic infrastructure, etc. If you consider all democracies and all dictatorships ... income is increasing. People at the bottom of society have very little to depend on.

Explain the factors on which the quality of life depends. -SST 10th

Description : Explain the factors on which the quality of life depends. -SST 10th

Last Answer : The quality of life depends upon the following factors: (i) Money and material things. (ii) Presence of family members, friends and relatives. (iii) Good working atmosphere at the office. (iv) An ... learn. (v) A position of self respect in the family. (vi) A safe and secure environment.

State the factors upon which the rate of Soil erosion depends. -SST 10th

Description : State the factors upon which the rate of Soil erosion depends. -SST 10th

Last Answer : The rate of Soil erosion depends upon: (i) Character of the slope of land. (ii) The density of vegetation. (iii) Rainfall—Heavy or Light.

13. A ray of light, incident obliquely on a face of a rectangular glass slab placed in air, emerges from the opposite face parallel to the incident ray. State two factors on which the lateral displacement of the emergent ray depends. [Foreign] -Chemistry-10

Description : 13. A ray of light, incident obliquely on a face of a rectangular glass slab placed in air, emerges from the opposite face parallel to the incident ray. State two factors on which the lateral displacement of the emergent ray depends. [Foreign] -Chemistry-10

Last Answer : Lateral displacement depends on the: angle of incidence, thickness of slab, and refractive index of the material. (any two)

State the factors on which acceleration due to gravity depends. -Science

Description : State the factors on which acceleration due to gravity depends. -Science

Last Answer : The acceleration due to gravity depends upon the radius of the earth,mass of the earth and on a constant having unit Nm^2/kg^2.

Why and when does a current carrying conductor kept in a magnetic field experience force? List the factors on which direction of this force depends? -Science

Description : Why and when does a current carrying conductor kept in a magnetic field experience force? List the factors on which direction of this force depends? -Science

Last Answer : The drifting of free electrons of a conductor in a definite direction causes the current to flow through it. When such conductor is placed in a uniform magnetic field, each drifted electron of a ... depends on (i) direction of current through the conductor, and (ii) direction of magnetic field.

What are the factors on which permeability of a membrane depends on? -Biology

Description : What are the factors on which permeability of a membrane depends on? -Biology

Last Answer : answer:

The parabolic potential of a substance depends on what factors ?

Description : The parabolic potential of a substance depends on what factors ?

Last Answer : Answer : ( 1) Thickness of the object ( ii) Volume and shape of the electrode ( iii) Type of electric field ( iv) Frequency of applied voltage ( v) Rate and duration of application of voltage ( ... of voltage ( vi) viii) Potential chemical changes as a result of moisture content and ( ix) pressure.

Measurement accuracy depends on what factors ?

Description : Measurement accuracy depends on what factors ?

Last Answer : The accuracy of the measurement depends on the following factors. 1. The device will not have any kind of mechanical defect , if there is a mechanical defect it will have to be diagnosed and ... the correct position to avoid parallax errors. 3. Avoid random errors and take average of more lessons.

Name two factors on which the coefficient of friction depends.

Description : Name two factors on which the coefficient of friction depends.

Last Answer : Name two factors on which the coefficient of friction depends.