Which of the following statements comparing transistors and vacuum tubes is correct? A. Both transistors and vacuum tubes have a cathode that must be heated to give off electrons. B. A vacuum tube must have a heated cathode, where transistors do not. C. Neither transistors nor vacuum tubes require heat for electrons to flow. D. The anode of both transistors and vacuum tubes must be heated to give off electrons.

1 Answer

Answer :

Answer: B

Related questions

Description : Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Last Answer : Answer: A

Description : Do electrons flow from the anode to the cathode?

Last Answer : electrons flow from cathode to anode because the electron has a negative charge and repels from the negatively charged cathode whilst also attracting to the positively charged anode.

Description : The input signal of a travelling wave tube is introduced at A. Cathode B. Anode C. Cathode end of the helix D. Collector end of the helix

Last Answer : C. Cathode end of the helix

Description : Which electronic component was made out of semiconductor material? A) Vacuum tubes B) Transistors C) ICs D) All of above

Last Answer : Answer : C

Description : The main electronic component used in first generation computers was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Last Answer : Answer : B

Description : Chief component of first generation computer was A) Transistors B) Vacuum Tubes and Valves C) Integrated Circuits D) None of above

Last Answer : Answer : B

Description : Vacuum tubes have been replaced by-----? A. Conductors B. Diodes C. Transistors (Answer) D. None of these

Last Answer : C. Transistors (Answer)

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : Vacuum Tubes and Valves

Description : First generation computer systems used 1) Transistors 2) Vacuum tubes 3) Magnetic cores 4) Silicon chips

Last Answer : 2) Vacuum tubes

Description : Which electronic component was use in first generation? 1) Vacuum tubes 2) transistors 3) IC chips 4) all above

Last Answer : 1) Vacuum tubes

Description : Which electronic component was use in first generation? 1 Vacuum tubes 2 transistors 3 IC chips 4 all above

Last Answer : 1 Vacuum tubes

Description : In electronic computers, vacuum tubes were replaced by transistors and transistors have been replaced by what device?

Last Answer : Integrated circuits.

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : b. Vacuum Tubes and Valves

Description : Chief component of first generation computer was a. Transistors b. Vacuum Tubes and Valves c. Integrated Circuits d. None of above

Last Answer : b. Vacuum Tubes and Valves

Description : Air is to be heated by condensing steam. Two heat exchangers are available (i) a shell and tube heat exchanger and (ii) a finned tube heat exchanger. Tube side heat transfer area are equal in both ... steam on shell side (D) Shell and tube heat exchanger with air on shell side and steam inside tubes

Last Answer : (B) Finned tube heat exchanger with air outside and steam inside

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

Description : The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward ... is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Last Answer : Answer: B

Description : The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: A

Description : Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: D

Description : The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: C

Description : A high voltage applied to a gas discharge tube containing neon gas at very low pressure causes a current to flow through the tube. Which one of the following are the particles that flow towards the ... Are they w) electrons x) protons y) negatively charged neon ions z) positively charged neon ions

Last Answer : ANSWER: Z -- POSITIVELY CHARGED NEON IONS

Description : It is an unidirectional device that blocks the current flow from cathode to anode   (A) SCR (B) PCR (C) VCR (D) DCR

Last Answer : It is an unidirectional device that blocks the current flow from cathode to anode SCR 

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Description : When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Last Answer : Differences in performance of tubes of the same type

Description : Which of the following was used as circuitry for first generation of computers? (1) Vacuum tube (2) Transistors (3) Integrated circuits (4) Microprocessors

Last Answer : Vacuum tube

Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3

Description : A method, in which brand equity measured by comparing differences between the retail price of the 'brand' and the retail price of an unbranded product in the same category is called ______________ 1. brand ... premium method 3. both 1 and 2 4. neither 1 nor 2 5. price increment method

Last Answer : price premium method

Description : In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining ... than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Last Answer : (B) More than 45°C

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : (1) Copper at eathode and oxygen at anode. Explanation: Copper is deposited at the cathode and is dissolved at the anode. Consequently the concentration of copper ions in solution remains constant. This can be used as a method of purification of copper as only pure copper is deposited at the cathode

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at cathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : Copper at cathode and oxygen at anode.

Description : Corrosion of a metal occurs at the (a) Anode (b) Cathode (c) Both anode and cathode (d) None of the above

Last Answer : Ans:(a)

Description : Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the __________ zone. (A) Laminar (B) Transition (C) Both 'a' & 'b' (D) Highly turbulent

Last Answer : (D) Highly turbulent

Description : It states that mass is a commodity that can neither be heated nor destroyed with the exception of nuclear processes where the conversion of mass into energy is a fundamental principle  a. Law of ... Conservation of Energy  c. Law of Conservation of Power  d. Law of Conservation of Heat

Last Answer : Law of Conservation of Mass

Description : Cathode rays in a discharge tube are made up of electrons emitted from the plate that is connected to the negative terminal of the DC voltage source.

Last Answer : Cathode rays in a discharge tube are made up of electrons emitted from the plate that is connected to the negative terminal of the DC voltage source.

Description : Which of the following statements identifies the difference between the primary windings and the secondary windings of a 2:1 stepdown transformer? A. The secondary windings have twice as much resistance ... primary windings. D. The secondary windings have half as many turns as the primary windings.

Last Answer : Answer: D

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

Description : In electro-refining, the pure metal is deposited on – (1) vessel (2) electrolyte (3) cathode (4) anode

Last Answer : (3) cathode Explanation: In electro-refining, the anodes consist of unrefined impure metal, and as the current passes through the acidic electrolyte the anodes are corroded into the solution so ... pure metal onto the cathodes. Electrolytic refining is used to extract impurities from crude metals.

Description : Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire

Last Answer : (B) Graphite and moving mercury

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

Description : What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Last Answer : (D) Cl2 , H2 & NaOH solution

Description : Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ... the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Last Answer : (C) The quality of X-rays can be controlled by varying the anode-cathode voltage

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

Description : Inverter cell anode and cathode of the…………. cell is used for vehicle (a) Copper electrode zinc (b)Zinc copper (c) Aluminium zinc (d)Nickel Cobalt

Last Answer : (a) Copper electrode zinc

Description : In the common dry cell, the zinc atoms are: w) reduced at the cathode x) oxidized at the cathode y) oxidized at the anode z) reduced at the anode

Last Answer : ANSWER: Y -- OXIDIZED AT THE ANODE

Description : In electro-refining, the pure metal is deposited on (1) vessel (2) electrolyte (3) cathode (4) anode

Last Answer : cathode

Description : When a spoon is to be electroplated with nickel the spoon is (1) dipped in a nickel sulphate solution (2) made anode and a pure nickel rod, the cathode (3) made cathode and a pure nickel red, the anode (4) coated with nickel sulphate and dried

Last Answer : made cathode and a pure nickel red, the anode

Description : Define cathode and anode.

Last Answer : Cathode: The electrode which is connected to the negative terminal (pole) of a battery is called as cathode. It is a negative electrode.  Anode: The electrode which is connected to the positive terminal (pole) of a battery is called as anode. It is a positive electrode. 

Description : What is the difference between an anode and a cathode?

Last Answer : The anode is positively charged electrode and the cathode is negatively charged electrode.

Description : Which is the positive terminal anode or cathode?

Last Answer : Anode is positive terminal and cathode is negative terminal.

Description : Is the anode or cathode longer in LED ?

Last Answer : In LED anode terminal is longer and cathode terminal is smaller.