To minimize magnetic field interaction between electrical conductors in physical proximity, it is best to keep them ___________________. A. parallel and as close as possible to each other B. at right angles and as close as possible to each other C. parallel to and as far as practicable from each other D. at right angles and as far as practicable from each other

1 Answer

Answer :

Answer: D

Related questions

Description : In a three-phase, squirrel-cage type, induction motor the rotating magnetic field is established by the _____________. A. current induced in the rotor windings B. application of a three-phase voltage ... caused by the induced current in the squirrel-cage bars with the magnetic field of the stator

Last Answer : Answer: B

Description : F = BIL can only be used if the magnetic field and electric current are A. at right angles to each other B. in same direction C. anti-parallel to each other D. anti-perpendicular to each other

Last Answer : at right angles to each other

Description : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through ... since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Last Answer : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel ... d) experience the constant torque equal to NBIA

Description : The basis of the technique of chromatography for separating components of a mixture is? A. the differing movement of particles of different mass in an electrical field B. the interaction of the ... infrared radiation by the components. D. the deflection of charged particles in a magnetic field. 

Last Answer : the interaction of the components with a stationary and a mobile phases

Description : f an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must comply d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Last Answer : b. Request and if practicable accept an amended clearance

Description : If an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must ... d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Last Answer : b. Request and if practicable accept an amended clearance

Description : The amount of voltage induced in the windings of an AC generator depends on ____________. A. the number of conductors in series per winding B. the speed at which the magnetic field passes across the winding C. the strength of the magnetic field D. all of the above

Last Answer : Answer: D

Description : What are electromagnetic waves? A. Alternating currents in the core of an electromagnet B. A wave consisting of two electric fields at right angles to each other C. A wave consisting of an electric field ... to each other D. A wave consisting of two magnetic fields at right angles to each other

Last Answer : C. A wave consisting of an electric field and a magnetic field at right angles to each other

Description : What are electromagnetic waves? A. A wave consisting of two magnetic fields at right angles to each other B. A wave consisting of an electric field and a magnetic field at right angles to each ... core of an electromagnet D. A wave consisting of two electric fields at right angles to each other

Last Answer : B. A wave consisting of an electric field and a magnetic field at right angles to each other.

Description : Force due to magnetic field and velocity is A. at right angles to each other B. at acute angles with each other C. at obtuse angle with each other D. antiparallel to each othe

Last Answer : at right angles to each other

Description : Why do competing businesses (e.g., gas stations) so routinely situate themselves in close proximity with each other?

Last Answer : This is often done so that they can easily compete with each other. Say one gas station is charging $4.10 for gas, but the one across the street is selling it for only $4.07. This gives ... them or easy business for the other gas stations, depending on whether the customer has enough cash or not.

Description : In aluminium conductors, steel core is provided to (a) compensate for skin effect (b) neutralise proximity effect (c) reduce line inductance (d) increase the tensile strength

Last Answer : (d) increase the tensile strength

Description : For better interaction with the students, the teachers objective should be the Options: A) Equitable Distribution Of Response Time B) Proximity C) Affirm Or Correct Student Performance D) All Of These

Last Answer : D) All Of These

Description : Which of the following laws relates the magnetic field to the magnitude, direction, length, and proximity of the electric current? A) Lenz’s law B) Faraday’s law C) Biot–Savart law D) None of these

Last Answer : Which of the following laws relates the magnetic field to the magnitude, direction, length, and proximity of the electric current? A) Lenz’s law B) Faraday’s law C) Biot–Savart law D) None of these

Description : Metal are good conductors, because (1) they contain free electrons (2) the molecules in them are very close to each other (3) the molecules in them collide very freely (4) they contain reflecting surface

Last Answer : they contain free electrons

Description : For a shortened vertical antenna, where should a loading coil be placed to minimize losses and produce the most effective performance? A. As low as possible on the vertical radiator B. Near the center of the vertical radiator C. As close to the transmitter as possible D. At a voltage node

Last Answer : B. Near the center of the vertical radiator

Description : Different components of the motherboard of a PC unit are linked together by sets of parallel electrical conducting lines. What are these lines called? A) Conductors B) Buses C) Connectors D) Consecutives

Last Answer : Answer : B

Description : Different components on the motherboard of a PC processor unit are linked together by sets or parallel electrical conducting lines. What are these lines called? a. Conductors b. Buses c. Connectors d. Connectively

Last Answer : Buses

Description : Different components on the motherboard of a PC processor unit are linked together by sets or parallel electrical conducting lines. What are these lines called? a. Conductors b. Buses c. Connectors d. Connectively

Last Answer : b. Buses

Description : The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Last Answer : (A) soft magnetic materials.

Description : Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Last Answer : (C) dielectric materials.

Description : Why is my Firefox not displaying the upper right function buttons of 'minimize', 'maximize' and 'close'?

Last Answer : answer:Perhaps you accidentally pressed the F11 key. Press it once to see if you get those buttons back.

Description : Two parallel conductors are separated by a distance, d carrying a current, I in the same direction. The magnetic field along a line running parallel to the conductors and midway between them is (A) zero (B) proportional to I (C) proportional to d (D) proportional to the permeability of the medium. 

Last Answer : The  magnetic  field  along  the conductor at  the  midway point  is  zero  because  equal  magnitide  of  field  are produced  in  each conductor   therefore  the  resultant  magnetic field  at  the  midway  is  zero.

Description : In the illustration, the purpose of part B is to _________. EL-0033 A. increase resistance in series with the contacts as they close to prevent arcing B. create a magnetic field in the steel ... event of an overload D. provide ventilation to the contact when the breaker is close to rated capacity

Last Answer : Answer: B

Description : Electric strip heaters are used in motor controllers to _____________. A. prevent freezing of movable contacts B. keep the components at their design ambient temperature C. prevent condensation of moisture D. minimize resistance in internal circuits

Last Answer : Answer: C

Description : A common type of protective covering used on electrical conductors is _____________. A. plain paper B. fibrous braid C. silver sheathing D. babbitt sheathing

Last Answer : Answer: B

Description : Distribution channels carry out the following functions except ___________________ 1. Physical distribution 2. Fixing the price 3. Matching the offer 4. Risk taking 5. None of these

Last Answer : Fixing the price

Description : A nonrelativistic electron enters a uniform magnetic field of 50 mT with a speed of `10^(6) m//s` at right angles to it and emerges from the field aft

Last Answer : A nonrelativistic electron enters a uniform magnetic field of 50 mT with a speed of `10^(6) m/ ... not depend on the initial speed of the electron.

Description : A non-relative proton enters at right angles to a uniform magnetic field of `30 mT`. What is the frequency of revolution of the particle if the field

Last Answer : A non-relative proton enters at right angles to a uniform magnetic field of `30 mT`. What is ... of the particle if the field is sufficiently deep?

Description : Electrons move at right angles to a magnetic field of `1.5xx10^(-2)` Tesla with a speed of `6xx10^(7)m//s`. If the specific charge of the electron is

Last Answer : Electrons move at right angles to a magnetic field of `1.5xx10^(-2)` Tesla with a speed of `6xx10^ ... C//kg`. The radius of the circular path will be

Description : A proton and helium nucleus are shot into a magnetic field at right angles to the field with same kinetic energy. Then the ratio of their radii is

Last Answer : A proton and helium nucleus are shot into a magnetic field at right angles to the field with same kinetic energy. Then the ... `1:2` C. `2:1` D. `1:4`

Description : A straight wire of length 0.20 m moves at a steady speed of 3.0 m s-1 at right angles to the magnetic field of flux density 0.10 T. The e.m.f induced across ends of wire is A. 0.5 V B. 0.06 V C. 0.05 V D. 0.04 V

Last Answer : 0.06 V

Description : An electron is travelling at right angles to a uniform magnetic field of flux density 1.2 mT with a speed of 8 × 106 m s-1, the radius of circular path followed by electron is A. 3.8 cm B. 3.7 cm C. 3.6 cm D. 3.5 cm

Last Answer : 3.8 cm

Description : Which of the following quantities change when a proton moves at right angles to a magnetic field? a) Momentum b) Energy c) Speed d) All of these

Last Answer : a) Momentum

Description : In the mass spectrograph, two positively charged ions having the same velocity pass through a slit and enter a uniform magnetic field at right angles to their initial velocities. The ions will NOT be ... charges and their masses are equal z) the ratios of their charges to their masses are equal  

Last Answer : ANSWER: Z -- THE RATIOS OF THEIR CHARGES TO THEIR MASSES ARE EQUAL 

Description : A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is at right angles to the magnetic field, describe the shape of the charged particle's path.

Last Answer : ANSWER: CIRCULAR or CIRCLE

Description : Current carried by each of the two long parallel conductors is doubled. If their separation is also doubled , force between them is

Last Answer : Increase two fold

Description : Which of the listed electrical devices is represented by the symbol shown in the illustration? EL-0055 A. Fixed resistance resistor B. Coil with magnetic core C. DC motor or generator shunt field D. Transformer

Last Answer : Answer: D

Description : Basic electrical motor action depends on _______________. A. a conductor rotated within a magnetic field B. a current carrying conductor placed in a magnetic field C. the relative force of the commutator and commutating poles D. the relative force of the armature and interpoles

Last Answer : Answer: B

Description : The primary function of an electric motor is to ___________. A. develop torque B. generate high voltages C. produce a magnetic field D. generate high electrical resistance

Last Answer : Answer: A

Description : An electrical device which employs a stationary armature and a rotating electromagnetic field is used aboard ship as a ____________. A. magnetic amplifier B. ship's service alternator C. three-wire DC generator D. saturable core reactor

Last Answer : Answer: B

Description : How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator ... high driving power D. By installing a low-pass filter in the antenna feed line

Last Answer : A. Through installing a band-pass filter in the antenna feed line

Description : Characteristics Characteristics of services include ervices include which of which of the following? the following? a. Close proximity proximity to the customer customer b. Simultaneous production and ... production and consumption c. Inability Inability to inventory inventory d. All of the above

Last Answer : d. All of the above

Last Answer : A hole and electron in close proximity would tend to Attract each other.

Description : According to Newton's 2nd law the object's acceleration and centripetal force are A. at right angles to each other B. anti parallel to each other C. make acute angle with each other D. in same direction

Last Answer : in same direction

Description : To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. stowed upright on its shaft C. supported by two 'V' notched wood blocks D. returned to the frame as soon as the bearings are removed

Last Answer : Answer: C

Description : When testing for blown fuses in a three-phase supply circuit to a motor, you should first ___________________. A. apply the megger across the tops of the line fuses B. apply an ammeter diagonally across ... of the line fuses D. ensure the circuit is de-energized, and then use a continuity tester

Last Answer : Answer: D

Description : To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. wrapped in several layers of heavy ... flat wood blocks on the workbench D. returned to the frame as soon as the bearings are removed

Last Answer : Answer: B

Description : The basic type of D.C. motor speed control where a generator armature directly feeds the motor armature and the motor and generator fields are excited by a separate D.C. source is called ___________________. A. Burmeister-Wain B. Ward-Leonard C. Sperry-Rand D. Atlas-Copco

Last Answer : Answer: B