The resistance of a conductor varies _____________. A. directly as its length and inversely as its cross-sectional area B. inversely as its length and directly as its cross-sectional area C. directly as its length and directly as its cross-sectional area D. inversely as its length and inversely as its cross-sectional area

1 Answer

Answer :

Answer: A

Related questions

Description : The existing resistance of a conductor is dependent upon its length, cross-sectional area, _____________. A. temperature and insulation B. material and insulation C. resistive coefficient and material D. material and temperature

Last Answer : Answer: D

Description : A wire is being used as a replacement having twice the length and one-half the cross-sectional area of the original wire. The resistance of this new wire, when compared to that of the original wire, ... B. twice as much C. the same as the original resistance D. one-half of the original resistance

Last Answer : Answer: A

Description : When the length and cross sectional area of a wire are both tripled, the resistance _____________. A. increases nine fold B. increases three fold C. remains the same D. decreases six fold

Last Answer : Answer: C

Description : If the length of a wire is halved and the cross-sectional area is doubled, the resistance will be _____________. A. quartered B. unchanged C. doubled D. quadrupled

Last Answer : Answer: A

Description : A replacement wire having twice the length and one-half the cross-sectional area of the original wire will have a resistance that is _____________. A. four times that of the original wire B. twice that of ... wire C. the same as that of the original wire D. one-half that of the original wire

Last Answer : Answer: A

Description : A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Last Answer : Answer: C

Description : Resistance of an electrical conductor is proportional to its (where, l = length and A = cross-sectional area of the conductor) (A) A (B) l (C) A2 (D) Both 'a' & 'b'

Last Answer : (D) Both 'a' & 'b'

Description : The resistance of a conductor is inversely proportional to its - (1) temperature (2) resistivity (3) area of cross section (4) length

Last Answer : (3) area of cross section Explanation: The resistance of a current carrying conductor is inversely proportional to the area of cross section of the conductor. This is because the resistance occurs due to the collision of electrons/charged particles.

Description : The resistance of electric wire will decrease as its _______________. A. length increases B. cross-sectional area increases C. temperature increases D. percent of metallic purities increases

Last Answer : Answer: B

Description : The resistance of a conductor varies inversely as?

Last Answer : The resistance of a conductor varies inversely as area of cross-section.

Description : The standard measuring unit of wire by its cross-sectional area, as used in American wire tables is the _____________. A. AWG B. circular mil C. square millimeter D. cubic inch

Last Answer : Answer: B

Description : With the increase in the cross sectional area of the conductor, the value of resistance:  (1) Increase (2) Remain same (3) Decrease (4) None of these

Last Answer : With the increase in the cross sectional area of the conductor, the value of resistance: Decrease.

Description : Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be?

Last Answer : Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be 10 ohms.

Description : The cross-sectional area of shipboard electrical cable is expressed in _____________. A. millimeters B. gage numbers C. centimeters D. circular mils

Last Answer : Answer: D

Description : In a heat exchanger, the rate of heat transfer from the hot fluid to the cold fluid (A) Varies directly as the area and the LMTD (B) Directly proportional to LMTD and inversely proportional to the area (C) Varies as square of the area (D) None of these

Last Answer : (A) Varies directly as the area and the LMTD

Description : What happens to the resistance of a wire when its length as well as the cross-sectional area are doubled? A) It doubles B) It becomes 4 times C) It becomes 2π times D) It remains the same

Last Answer : Automatically the resistivity will increase as they are the factors affecting the resistivity 

Description : A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor ... the flux created by the excitation current D. the stator flux rotates in the opposite direction

Last Answer : Answer: B

Description : Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect

Last Answer : resistance

Description : The volume (V) of a mass of gas varies directly as its absolute temperature (T) and inversely as the pressure (P) applied to it. The gas occupies a vo

Last Answer : The volume (V) of a mass of gas varies directly as its absolute temperature (T) and inversely as ... and pressure are 200 ml and 250 Pa respectively?

Description : The gravitational potential energy of an object close to the ground varies: w) inversely as its distance from the ground x) directly as its distance from the ground y) inversely as the square of its distance from the ground z) directly as the square of its distance from the ground 

Last Answer : ANSWER: X -- DIRECTLY AS ITS DISTANCE FROM THE GROUND

Description : How does the electric field strength of a standard broadcast station vary with the distance from the antenna? A. The field strength of a standard broadcast station vary with the distance from ... the distance from the antenna D. The field strength varies inversely as the distance from the antenna

Last Answer : D. The field strength varies inversely as the distance from the antenna

Description : In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Last Answer : (C) Is independent of pressure

Description : The rated life of a bearing varies (a) directly as load (b) inversely as the square of the load (c) inversely as the cube of the load

Last Answer : (c) inversely as the cube of the load

Description : The rated life of a bearing varies A. Directly as load B. Inversely as square of load C. Inversely as cube of load D. Inversely as fourth power of load

Last Answer : C. Inversely as cube of load

Description : The rated life of a bearing varies (A) Directly as load (B) Inversely as square of load (C) Inversely as cube of load (D) Inversely as fourth power of load

Last Answer : (C) Inversely as cube of load

Description : The head loss in turbulent flow in a pipe varies (A) Directly as the velocity (B) Inversely as the square of the velocity (C) Approximately as the square of the velocity (D) Inversely as the square of the diameter

Last Answer : (C) Approximately as the square of the velocity

Description : . The pressure and power requirement of a gas fan at constant speed & capacity varies __________ the gas density. (A) Directly as (B) Inversely as square root of (C) Inversely as (D) As square of

Last Answer : (A) Directly as

Description : Nusselt number/Biot number varies (A) Inversely with thermal conductivity (B) Directly with heat transfer co-efficient (C) Directly with thermal conductivity (D) Inversely with the dimension of the solid

Last Answer : (A) Inversely with thermal conductivity

Description : Permeability of soil varies a) Inversely as square of grain size b) Inversely as grain size c) Directly as grain size d) Square of grain size*

Last Answer : d) Square of grain size*

Description : What is the drift velocity of electrons in a copper conductor having a cross-sectional area of `5xx10^(-6) m^(2)` if the current is 10 A. Assume there

Last Answer : What is the drift velocity of electrons in a copper conductor having a cross-sectional area of `5xx10^(-6) m^( ... `8.0xx10^(28) "electrons"//m^(3)`.

Description : Centering error of a theodolite produces an error (A) In all angles equally (B) Which does not vary with the direction or pointing (C) Which varies with the direction of pointing and inversely with the length of sight (D) None of these 

Last Answer : (C) Which varies with the direction of pointing and inversely with the length of sight 

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. A equal to B directly proportional to C inversely proportional to D independent of

Last Answer : C inversely proportional to

Description : n steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional to c) inversely proportional to d) independent of

Last Answer : c) inversely proportional to

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. (A) equal to (B) directly proportional to (C) inversely proportional to (D) independent of

Last Answer : (C) inversely proportional to

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional toc) inversely proportional to d) independent of

Last Answer : c) inversely proportional to

Description : The intensity of pressure at any point, in a liquid, is (A) Directly proportional to the area of the vessel containing liquid (B) Directly proportional to the depth of liquid from the ... length of the vessel containing liquid (D) Inversely proportional to the depth of liquid from the surface

Last Answer : Answer: Option B

Description : Which solid AWG wire size has the smallest physical cross-sectional area? A. 12 B. 14 C. 16 D. 18

Last Answer : Answer: D

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these

Last Answer : (B) Slenderness ratio

Description : Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, under a concentrated load W at its free end, is (A) (2/3) (WL/AG) (B) (1/3) (WL²/EIA) (C) (3/2) (WL/AG) (D) (3/2) (WL²/AG

Last Answer : (C) (3/2) (WL/AG

Description : A column is said to be a short column, when (a) its length is very small (b) its cross-sectional area is small (c) the ratio of its length to the least radhis of gyration is less than 80 (d) the ratio of its length to the least radius of gyration is more than 80

Last Answer : (c) the ratio of its length to the least radhis of gyration is less than 80

Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Last Answer :  it is directly proportional to the area of cross-section of wire

Description : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225 mm^2

Last Answer : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225mm2 when a load ... 's modulus of steel= 2 1011 N/m2]

Description : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free

Last Answer : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)` ... taken by an electron to cross the length of the wire.

Description : Stress is force applied on A. volume B. cross sectional area C. unit length D. across diagonal

Last Answer : cross sectional area

Description : For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Last Answer : (B) Cross-sectional area

Description : Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, subjected to w/m u.d.l., is (A) (3/4) (L²w/GA) (B) (3/2) (L²w/GA) (C) (2/3) (L3w/GA) (D) (3/2) (Lw/GA²)

Last Answer : (A) (3/4) (L²w/GA)

Description : The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Last Answer : (C) 1/A

Description : 16. Surface tension force is the product of surface tension per unit length and cross-sectional area of flow. A) Correct B) Incorrect

Last Answer : B

Description : Two aluminium conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 100 ohms the resistance of other conductor will be 

Last Answer : Two aluminium conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 100 ohms the resistance of other conductor will be 25 ohms.

Description : Conductor resistance may be INDIRECTLY measured by using a/an _____________. A. voltmeter only B. ammeter only C. voltmeter and an ammeter D. ohmmeter only

Last Answer : Answer: C