The third color band on a resistor is used to indicate the ______________. A. tolerance of the resistor B. number of zeros following the first two significant figures in the resistance value C. first significant figure of the resistance D. second significant figure of the resistance

1 Answer

Answer :

Answer: B

Related questions

Description : In the resistance colour code, the fourth band signifies – (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Last Answer : (1) tolerance level Explanation: The first and second band represent the numerical value of the resistor, and the color of the third band specify the power-often multiplier. Reading the resistor from left to right, the fourth band represents the tolerance.

Description : In the resistance colour code, the fourth band signifies (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Last Answer : tolerance level

Description : The resistance value of a resistor in a circuit can best be determined by the _____________. A. single solid body color of the resistor B. band markings on the resistor C. amperage value written on the resistor D. physical size of the resistor

Last Answer : Answer: B

Description : A resistor with the color coded value of 1000 ohms and ± 10% tolerance can have an actual resistance between ________. A. 990 ohm and 1010 ohm B. 900 ohm and 1100 ohm C. 1000 ohm and 1100 ohm D. 900 ohm and 1000 ohm. 

Last Answer : A resistor with the color coded value of 1000 ohms and ± 10% tolerance can have an actual resistance between 900 ohm and 1100 ohm.

Description : If you disconnect and arrange both ends of a three conductor cable, without any contact between the individual conductors, an indicated ohmic value between the ends of a single conductor would indicate ... resistance C. the presence of a partial ground D. that the conductor is not short circuited

Last Answer : Answer: A

Description : For practical purposes, in a simple series circuit, the source voltage will be dropped across one resistor if it has ______________. A. half the resistance of the other resistor B. a resistance equal to the other C. at least ten times the resistance of the other D. a partial short circuit

Last Answer : Answer: C

Description : The gold color code in a resistor indicates a tolerance of

Last Answer : The gold color code in a resistor indicates a tolerance of 5%

Description : Indicate the false statement A. The noise generated in a resistance or the resistive component of any impedance is random. B. Random noise power is proportional to the bandwidth over which is measured ... exist D. All formula referring to random noise are applicable only to the value of such noise.

Last Answer : C. A random voltage across the resistor does not exist

Description : A carbon resistor has a resistance of 50 ohms, and a tolerance of 5 percent. What are the colors of bands one, two, three, and four, respectively?

Last Answer : The bands are green, black, black, and gold.

Description : The sequence of bands marked on a carbon resistor is yellow , red orange and silver. What is its (a) resistance and (b) tolerance ?

Last Answer : The sequence of bands marked on a carbon resistor is yellow , red orange and silver. What is its (a) resistance and (b) tolerance ?

Description : The advantage(s) of the method of D.C. motor speed control shown in the illustration is/are ______________. EL-0101 A. elimination of armature starting resistor losses B. elimination of speed instability with variable loads C. the ease of reversing motor direction D. all of the above

Last Answer : Answer: D

Description : The purpose of resistor bank 'R1-R5' in the winch circuit shown in the illustration is to ______________. EL-0102 A. limit armature current in lower and 'series field' current in hoist to ... required speeds D. regulate the strength of the brake solenoid 'B1-B2' in both directions of operation

Last Answer : Answer: C

Description : In a simple series circuit, the entire source voltage will drop across ______________. A. the resistor next to the negative terminal B. a short circuit C. the resistor next to the positive terminal D. an open circuit

Last Answer : Answer: D

Description : In general, polyphase induction motors can be started on full line voltage by means of ______________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

Description : A resistor is handed to you for identification with the following color code: the first band is blue, followed by gray, green, gold, and brown. What is the resistor’s value?

Last Answer : 6,800,000 ohms (6.8 mega ohms), with 5% tolerance, and a 1% reliability level.

Description : A carbon resistor has the following color bands: The first band is yellow, followed by violet, yellow, and silver. What is the ohmic value of the resistor?

Last Answer : 470,000 ohms (470 kilo ohms).

Description : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Last Answer : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Description : What is Zero's real name and why is it significant in the book Holes?

Last Answer : ttt

Description : The resistance value of a carbon resistor having Orange, Red, Brown and Golden color bands is

Last Answer : The resistance value of a carbon resistor having Orange, Red, Brown and Golden color bands is 320 Ω ± 5%

Description : what color band markings would be seen on a 2.2 k resistor? -General Knowledge

Last Answer : The color band markings that would be seen on a 2.2 k resistor is: Red, red, red.

Description : The device in figure 'B' shown in the illustration can be used to control an AC load yet maintain its high gain by ______________. EL-0091 A. connecting the load to the output side of the ... connecting the load to the input side of the bridge D. reversing the current flow through the bias winding

Last Answer : Answer: C

Description : In actual applications, electrical connections to 'R1-R2' of figure 'A' and to 'R1-R2- R3' of figure 'B' shown in the illustration are made by ______________. EL-0092 A. soldered contacts B. spliced and taped connections C. slip rings and brushes D. solderless crimp-on connectors

Last Answer : Answer: C

Description : The horizontal line which cuts across 'L1' shown in figure 'A' of the illustration indicates a/an ______________. EL-0091 A. iron core B. saturable core C. air gap D. capacitive coupling

Last Answer : Answer: B

Description : Figure 'A' of the diagram shown in the illustration represents a ______________. EL-0092 A. differential transformer B. saturable reactor C. synchro system D. magnetic amplifier

Last Answer : Answer: C

Description : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

Last Answer : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

Description : The value 10.00 has __ significant figures?

Last Answer : 4

Description : The value 10.00 has __ significant figures?

Last Answer : 4

Description : A voltage of 30 V is applied across a colour coded carbon resistor with first, second and third rings of blue, black and yellow colurs. What is the cu

Last Answer : A voltage of 30 V is applied across a colour coded carbon resistor with first, second and ... What is the current flowing through the resistor ?

Description : What is represented by the electric symbol figure 'D' in the illustration? EL-0005 A. Fuse B. Plug-in contact resistor C. Variable capacitor D. Electrolytic capacitor

Last Answer : Answer: A

Description : Each resistor shown in the figure has a resistance of `10 Omega` and the battery has the emf 6 V. What will be the current supplied by the battery ?

Last Answer : Each resistor shown in the figure has a resistance of `10 Omega` and the battery has the emf 6 V. What will be the ... 2 A` C. `1.8 A` D. `0.3 A`

Description : In a simple DC circuit, the resistance is held constant while the applied voltage is halved. Current flow, therefore, will ______________. A. double B. remain the same C. be divided by two D. be divided by four

Last Answer : Answer: C

Description : The wiring diagram for the motor starting circuit shown in the illustration indicates ______________. EL-0007 A. resistance starting B. reduced voltage starting C. low voltage protection D. low voltage release

Last Answer : Answer: C

Description : If your multimeter gives a reading in ohms when testing each end of each conductor of a three-conductor cable, this indicates ______________. A. continuity of the conductor B. an infinite resistance C. the presence of a partial ground D. that the conductor is not short circuited

Last Answer : Answer: A

Description : Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of ... debris C. periodic testing of insulation resistance with a megger D. all of the above

Last Answer : Answer: D

Description : Where a thermal-acting breaker is required to be used in an area of unusually high, low, or constantly fluctuating temperatures, an ambient compensating element must be used. This element consists of ... arm B. conical spring on the contact arm C. second bimetal element D. second electromagnet

Last Answer : Answer: C

Description : Significant tolerance does not develop to the following action of morphine: A. Analgesia B. Euphoria C. Sedation D. Miosis

Last Answer : D. Miosis

Description : How do you Round the following number to two significant figures 2.576?

Last Answer : 2.6

Description : how many significant figures does the number 546.000 have -General Knowledge

Last Answer : There will be only three significant figures because it is 546.000 the zeros are just place holders so thus meaning they are not significant.

Description : The number of significant figures in 11.118 × 10^-6 is

Last Answer : The number of significant figures in 11.118 × 10-6 is (A) 3 (B) 4 (C) 5 (D) 6

Description : Add 7.21, 12.141 and 0.0028 and express the result to an appropriate number of significant figures.

Last Answer : Add 7.21, 12.141 and 0.0028 and express the result to an appropriate number of significant figures.

Description : Find the number of significant figures in the following numbers, i. 25.42 ii. 0.004567 iii. 35.320 iv. 91.000

Last Answer : Find the number of significant figures in the following numbers, i. 25.42 ii. 0.004567 iii. 35.320 iv. 91.000

Description : What is the significant figures of number of .000320?

Last Answer : They are 3 and 2

Description : How many significant figures are there in the number 2.3409500?

Last Answer : 8

Description : The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, ... this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Last Answer : B. 2,518 Ω

Description : Which of the listed electrical devices is represented by the symbol shown in the illustration? EL-0055 A. Fixed resistance resistor B. Coil with magnetic core C. DC motor or generator shunt field D. Transformer

Last Answer : Answer: D

Description : When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Last Answer : Answer: C

Description : What power would be consumed by the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Last Answer : Answer: D

Description : What would be the voltage drop across the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Last Answer : Answer: C